WELCOME TO RIVER DAVES PLACE

F26 / Mach 26

ChrisV

ChrisV

Well-Known Member
Joined
Nov 30, 2020
Messages
4,182
Reaction score
13,041
80k
0A3C790F-E1CE-4BAB-9326-CC1AFBE03034.png
 
ChrisV

ChrisV

Well-Known Member
Joined
Nov 30, 2020
Messages
4,182
Reaction score
13,041
Guys with m26 and 700hp+ i/o.

I know every boat is different but what trim numbers are you guys running?

For example. #2 is neutral on my trim card and i've only bumped it to #3.

Trying to figure if I can go more trim but don't want to mess up my driveshaft joints.

23D445DC-1F71-491B-8B99-9CE7384A5A1B.jpeg
 
Mcchevy69ss

Mcchevy69ss

Well-Known Member
Joined
Dec 22, 2017
Messages
121
Reaction score
194
I run #3 till 100mph then bump down to 2 for the 110+mph runs. Anything above 3 seems to be loose but doesn’t add mph…and it gives my lower major cavitation burn behind the water pickup.
 
RiverDave

RiverDave

In it to win it
Joined
Sep 13, 2007
Messages
126,302
Reaction score
164,753
ChrisV said:
Guys with m26 and 700hp+ i/o.

I know every boat is different but what trim numbers are you guys running?

For example. #2 is neutral on my trim card and i've only bumped it to #3.

Trying to figure if I can go more trim but don't want to mess up my driveshaft joints.

View attachment 1406310
Click to expand...

You don’t have any I joint worries at those numbers.. more handling numbers.

That said back in the day Carlos from DCB would fly the shit out of his.. lol.

If the water got rougher though he’d be more neutral and fly flat.. it was wild watching him do big poker runs and end up in the top 2-3 boats first to the card stop.

RD
 
Dcb.blake

Dcb.blake

Well-Known Member
Joined
Jul 25, 2021
Messages
499
Reaction score
713
I have an F but it’s the same bottom from what I’m told.

What RD said is spot on. Anything above 3-4 just seems to lift the front and gain nothing. I normally ride at 3ish when cruising

Just figured out that in rougher waters the boat likes nose down in the neutral 0 spot. Kinda weird how it works hence why I just tried it and figured it out not too long ago

Not sure with the extension box if it’s the same deal and will act the same? Also you have the same indicator that has -2 and -1 I’d assume?
 
ChrisV

ChrisV

Well-Known Member
Joined
Nov 30, 2020
Messages
4,182
Reaction score
13,041
Dcb.blake said:
I have an F but it’s the same bottom from what I’m told.

What RD said is spot on. Anything above 3-4 just seems to lift the front and gain nothing. I normally ride at 3ish when cruising

Just figured out that in rougher waters the boat likes nose down in the neutral 0 spot. Kinda weird how it works hence why I just tried it and figured it out not too long ago

Not sure with the extension box if it’s the same deal and will act the same? Also you have the same indicator that has -2 and -1 I’d assume?
Click to expand...
Yeah same indicator. But from what i measured #2 is neutral. So that should be 0. Ill double check again this weekend.
 
lenmann

lenmann

Well-Known Member
Joined
Apr 13, 2013
Messages
1,693
Reaction score
3,516
Damn that boat looks great on the water!

May just be the composition of the shot (fucking phone cameras are amazing nowwa days) but it just kinda screams sporty and elegant. Regardless of how or why, that's a great looking float.
 
Tony DCB Boats

Tony DCB Boats

Well-Known Member
Joined
Feb 19, 2019
Messages
789
Reaction score
4,642
ChrisV said:
Got a base and trimmed it high this trip. It’s a whole different boat. Was proposing like crazy cause I didn’t trim enough. (Rookie)

Bought a 30p prop so far I’m loving it.

View attachment 1408937 View attachment 1408939
Click to expand...
Looks like you have a 1" spacer in there as well. I wonder if this was put in to get it to roll over better.
Hmmm......
 
Tony DCB Boats

Tony DCB Boats

Well-Known Member
Joined
Feb 19, 2019
Messages
789
Reaction score
4,642
ChrisV said:
I didn’t even notice that. Boat rolls over pretty good. Tabs are amazing for that.
Click to expand...
Wonder why its there and if it would be faster without it?
With tabs the rollover is good but it may slip and the prop slip may be higher with removing it.
 
ChrisV

ChrisV

Well-Known Member
Joined
Nov 30, 2020
Messages
4,182
Reaction score
13,041
lenmann said:
Damn that boat looks great on the water!

May just be the composition of the shot (fucking phone cameras are amazing nowwa days) but it just kinda screams sporty and elegant. Regardless of how or why, that's a great looking float.
Click to expand...
Thanks Len!

I'm definitely loving it more every time I use it.
 
ChrisV

ChrisV

Well-Known Member
Joined
Nov 30, 2020
Messages
4,182
Reaction score
13,041
Tony DCB Boats said:
Wonder why its there and if it would be faster without it?
With tabs the rollover is good but it may slip and the prop slip may be higher with removing it.
Click to expand...
I'll leave it alone for now.. No speed runs until I get more comfortable with it.
 
02HoWaRd26

02HoWaRd26

DCBroke
Joined
Dec 19, 2007
Messages
12,210
Reaction score
29,074
Tony DCB Boats said:
Wonder why its there and if it would be faster without it?
With tabs the rollover is good but it may slip and the prop slip may be higher with removing it.
Click to expand...
Good eye, on mine I’m planning at next oil change to remove my +2 spacer (at 0 that way) and replacing with my +1 spacer bringing mine to -1 now that I’ve got a better handle on mine.
 
Dcb.blake

Dcb.blake

Well-Known Member
Joined
Jul 25, 2021
Messages
499
Reaction score
713
I’m running a -1 and it will slip the prop sometimes. Not bad at all just more noticeable at certain times when getting on plane. Won’t do it 90% of the time but every so often it will. Not sure if it’s the water or just how I used the throttle.

-1 was much better than the 0 I had before. Gained some mph and also less effort rolling over to plane
 
ChrisV

ChrisV

Well-Known Member
Joined
Nov 30, 2020
Messages
4,182
Reaction score
13,041
@rpmsrup badass M26 build.

Killer work from KMG as usual.

More details down below.

DCB M26 Build

So it has started, the full teardown to bare hull, going in for half cap, new gel and scheme, repower to twin 450Rs and all new rigging, going to try and keep the interior but we will see if I change my mind on that, some of the little upgrades will be Simrad in dash all the gauge deleted...
www.riverdavesplace.com www.riverdavesplace.com
finish 1.jpeg
finish 2.jpeg
finish 4.jpeg
finish 6.jpeg
 
Nail It

Nail It

Well-Known Member
Joined
Jul 6, 2017
Messages
60
Reaction score
101
Tony DCB Boats said:
Makes sense as the 2" shorty is too much and they added the inch back in. I would leave it alone.
Click to expand...
Dcb.blake said:
I’m running a -1 and it will slip the prop sometimes. Not bad at all just more noticeable at certain times when getting on plane. Won’t do it 90% of the time but every so often it will. Not sure if it’s the water or just how I used the throttle.

-1 was much better than the 0 I had before. Gained some mph and also less effort rolling over to plane
Click to expand...
Agreed. I've ran a 0, -1, & -2 and found the -1 to be the sweet spot. The -1 is about 1-2mph faster than the 0. The -2 ran about the same mph but felt a little a too loose over 100mph, and slipped getting on plane. Also, mine does not have tabs or a drive extension box.
 
Nail It

Nail It

Well-Known Member
Joined
Jul 6, 2017
Messages
60
Reaction score
101
ChrisV said:
Yeah same indicator. But from what i measured #2 is neutral. So that should be 0. Ill double check again this weekend.
Click to expand...
#2 on the trim indicator is about nuetral on mine as well. I run at 3 when cruising normally. But, I trim up to 4.5 or 5 when accelerating to lift the nose and take a set. Once the boat is packing enough air around 90-100+, I have found that bumping the trim down to 3.5 or 4 pulls the best top end number.
 
ChrisV

ChrisV

Well-Known Member
Joined
Nov 30, 2020
Messages
4,182
Reaction score
13,041
Nail It said:
#2 on the trim indicator is about nuetral on mine as well. I run at 3 when cruising normally. But, I trim up to 4.5 or 5 when accelerating to lift the nose and take a set. Once the boat is packing enough air around 90-100+, I have found that bumping the trim down to 3.5 or 4 pulls the best top end number.
Click to expand...
Exactly the numbers i ran last weekend. Do you have an extension box as well?
 
H

HBCraig

Well-Known Member
Joined
Jan 8, 2008
Messages
9,456
Reaction score
12,706
JFMFG

JFMFG

Well-Known Member
Joined
Aug 9, 2018
Messages
4,319
Reaction score
6,956
ChrisV said:
Friends M26 about to wrap up. Just got done rigging at Teague and came out beautiful. He should be getting some CMI headers end of the season and will make it pop. New trailer next year depending when I'm ready. Clean and simple. View attachment 1420840 View attachment 1420841 View attachment 1420842 View attachment 1420843
Click to expand...
I dig the dash. The bite. Lower is a nice touch as well. Lost my respect when I only saw 2 axels not 3. Trailer should be more of a priority before rigging 😂😂😂. That thing is clean!!
 
Dcb.blake

Dcb.blake

Well-Known Member
Joined
Jul 25, 2021
Messages
499
Reaction score
713
Sob is sanitary 👌🏼 looks damn good with the powdered exhaust imo. Unless it’s a restriction for the motor I’d leave it. Polished cmi headers are gorgeous but damn it looks clean as is😍

I’ve never seen one with the stringers like that
 
CammdSS

CammdSS

Well-Known Member
Joined
Jan 30, 2024
Messages
104
Reaction score
205
JL95

JL95

Well-Known Member
Joined
Dec 21, 2021
Messages
807
Reaction score
1,780
I'm pretty sure I spotted that white and gold rapid transit mach26 at martinez getting it's interior worked on.
 
You must log in or register to reply here.
Top