The 21' and under 70+ mph Boat pic thread

[TonyFanelli]

Another D21

 

[Sharp Shooter]

 

[rrrr]

View attachment 1397036

I see an old friend.

 

[Sharp Shooter]

I see an old friend.

Yeah, your old boat in the back ground.

 

[Clank123]

Boat was built in the mid 60’s and still runnin strong

 

[DUN]

Boat was built in the mid 60’s and still runnin strong

Looks so damn fun

 

[TonyFanelli]

Kalawain primed, getting ready for paint

 

[Terminal Velocity]

New 540 being installed, to be on the river next weekend. If parts show up.

 

[Clank123]

Was having an incredible day yesterday until my wife called me in just after 3 yesterday.
It’s amazing how in a matter of seconds your day can change.
I am so thankful that the Lord had a hand in the attempt on DJT yesterday and that from all reports he is doing well.
Puts everything thing we do and have a deep passion for in perspective for sure.
With that being said…it was a busy day around here yesterday!
First, the twin engine tunnel “PowerCat” finally headed to the paint shop…

Then this Biesemeyer arrived with a truck bed full of parts to be assembled for the 2024 Enduro and run in the small block class.
It’s gonna be some work, but we’ll git’er done.

Been rigging this 23 foot whaler on and off for a little over a year.
Between other projects, my real job and a shoulder surgery that cut about 4 months out from working on it(everything needs to be done on hands and knees in the boat and I couldn’t support myself without pain) I got it fired, tuned and transmission tested and she’s ready for a water test in a few weeks.
Probably one of the toughest installs I’ve done between the physical part of it(you don’t just lean in you climb in) and the need to fit everything in between the stringers. Super tight for the parts and a good sized guy like me getting to everything!
Good News…she’s ready to go!

 

[Tommy Gun Images]

Was having an incredible day yesterday until my wife called me in just after 3 yesterday.
It’s amazing how in a matter of seconds your day can change.
I am so thankful that the Lord had a hand in the attempt on DJT yesterday and that from all reports he is doing well.
Puts everything thing we do and have a deep passion for in perspective for sure.
With that being said…it was a busy day around here yesterday!
First, the twin engine tunnel “PowerCat” finally headed to the paint shop…
View attachment 1401346
Then this Biesemeyer arrived with a truck bed full of parts to be assembled for the 2024 Enduro and run in the small block class.
It’s gonna be some work, but we’ll git’er done.
View attachment 1401348 View attachment 1401347
Been rigging this 23 foot whaler on and off for a little over a year.
Between other projects, my real job and a shoulder surgery that cut about 4 months out from working on it(everything needs to be done on hands and knees in the boat and I couldn’t support myself without pain) I got it fired, tuned and transmission tested and she’s ready for a water test in a few weeks.
Probably one of the toughest installs I’ve done between the physical part of it(you don’t just lean in you climb in) and the need to fit everything in between the stringers. Super tight for the parts and a good sized guy like me getting to everything!
Good News…she’s ready to go!
View attachment 1401351
View attachment 1401352

That thing is bad ass! What is it?

 

[74 spectra20 v-drive]

Boat was built in the mid 60’s and still runnin strong

Originally built in the 60's... Ken Meyers (B&K Boats) did a ton of work on Mr. Magoo over the years including that bad ass paint job that still looks awesome, not sure is Mr Moody has had it replicated or touched up since Ken passed... I loved seeing that boat at B&K, I would just walk around it and check it out, the trailer is next level as well. The gents that built that boat are top notch!

 

[timstoy]

Originally built in the 60's... Ken Meyers (B&K Boats) did a ton of work on Mr. Magoo over the years including that bad ass paint job that still looks awesome, not sure is Mr Moody has had it replicated or touched up since Ken passed... I loved seeing that boat at B&K, I would just walk around it and check it out, the trailer is next level as well. The gents that built that boat are top notch!

Kenny was a great guy! Loved his Chevy truck!

 

[Sharp Shooter]

That thing is bad ass! What is it?

Silverwing Whaler. Pretty sure Charles Monroe owns it.

 

[Sharp Shooter]

 

[Clank123]

That thing is bad ass! What is it?

It’s a 23 foot Silver Wing.
Boats were originally built by Speed Marine in Orange County and the mold was sold to Jim Wilkes.
I believe there was around 15-20 made total and all but 4 were I/Os.
And yes, this one is owned by Chuck Monroe.
He bought it originally in the 80’s and at some point it was stolen and found years later up in Sacramento where he bought it back.
The re-rigging was started on and not finished and that’s when him and Scott asked me to finish it.
Can’t wait to pull up to Fox’s in this beauty!
Been a longtime comin!

 

[74 spectra20 v-drive]

Kenny was a great guy! Loved his Chevy truck!

A combination of his Son In Law Luther and good Friend Felix, ken was rollin in the 69' before he passed, this was outside his services. Ken was a deer friend, he and my Dad met in 46' or 47' flying model air planes and Kenny's first trip ever leaving Lakewood was with my Uncle Walter and my Dad to lake Millerton. I think that trip with my uncles SK and w/ a flat head.

 

[timstoy]

A combination of his Son In Law Luther and good Friend Felix, ken was rollin in the 69' before he passed, this was outside his services. Ken was a deer friend, he and my Dad met in 46' or 47' flying model air planes and Kenny's first trip ever leaving Lakewood was with my Uncle Walter and my Dad to lake Millerton. I think that trip with my uncles SK and w/ a flat head.

My Mom and Dad bought a 1970 Chevy C20. I still have it!

 

[Tommy Gun Images]

It’s a 23 foot Silver Wing.
Boats were originally built by Speed Marine in Orange County and the mold was sold to Jim Wilkes.
I believe there was around 15-20 made total and all but 4 were I/Os.
And yes, this one is owned by Chuck Monroe.
He bought it originally in the 80’s and at some point it was stolen and found years later up in Sacramento where he bought it back.
The re-rigging was started on and not finished and that’s when him and Scott asked me to finish it.
Can’t wait to pull up to Fox’s in this beauty!
Been a longtime comin!

View attachment 1401681
View attachment 1401682

Thing is cool! I love it!

 

[Sharp Shooter]

In honor of Her454 a quick throwback to CFW.

 

[Sharp Shooter]

Irvine 2012

 

[DUN]

Ole v-drive video hauling the mail

 

[Sharp Shooter]

Ole v-drive video hauling the mail

Only 103 that day giving rides.

 

[Sharp Shooter]

How about some Mandella's...

 

[timstoy]

Irvine 2012 View attachment 1403238
View attachment 1403239

View attachment 1403242

View attachment 1403243

View attachment 1403236 View attachment 1403237

View attachment 1403244

Miss Irvine lake! It was great while it lasted!

 

[oldman]

Miss Irvine lake! It was great while it lasted!

It's got more water in it than it's had in 20 years.
Too bad no boating.

 

[Sharp Shooter]

 

[TonyFanelli]

Another one from D21

 

[Clank123]

Walked by this today hangin on the wall, don’t think I’ve ever posted it.
One of the most intense restorations I’ve ever done.
Boat was a mess as you can see.
Check out the picture of both engines on the dyno!
1291 ft lbs of torque at 3300!
Thing jumped out of the water like no other cruiser I have ever driven!

 

[TonyFanelli]

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

 

[Sharp Shooter]

Walked by this today hangin on the wall, don’t think I’ve ever posted it.
One of the most intense restorations I’ve ever done.
Boat was a mess as you can see.
Check out the picture of both engines on the dyno!
1291 ft lbs of torque at 3300!
Thing jumped out of the water like no other cruiser I have ever driven!
View attachment 1408520

A wonderful piece of history Dave! Great job!

 

[TonyFanelli]

Hydroplane doing it's thing! 🔥🔥 Credit: @montwork follow @daily_dose_of_powerboats #raceboat #powerboat #speedboat #dailydoseofpowerboats #power | By Daily Dose Of PowerboatsFacebook

Hydroplane doing it's thing! 🔥🔥 Credit: @montwork follow @daily_dose_of_powerboats #raceboat #powerboat #speedboat #dailydoseofpowerboats #power

www.facebook.com

 

[TonyFanelli]

 

[@BigRedBryan13]

Getting very close with things at this point...
Big thanks to Shane and Steve.

 

[Sharp Shooter]

 

[@BigRedBryan13]

I recent Pic of my old kurtis, the time capsule still looks and runs great! Ford FE power still on the water with a blower.

 

[TonyFanelli]

1) From D21 enterprises
2) my old '72 RaysonCraft
427 FE

 

[MOUZER]

I just posted this up for stu on Craigslist

 

[TonyFanelli]

Kalawain getting close!
Just some final assembly and pinstriping left

 

[MOUZER]

So so awesome looks really nice

 

[Tommy Gun Images]

Just got these from Stu...Early 70's Hallet set up for BBC on a Hood trailer.
Selling for $3K without motor
View attachment 1410237 View attachment 1410238 View attachment 1410239 View attachment 1410240

Was that thing sitting at a house in Havasu forever?

 

[MOUZER]

Don't bother stu it's not for sale he just texted me it's not for sell please take down all adds

 

[MOUZER]

 

[MOUZER]

Just got these from Stu...Early 70's Hallet set up for BBC on a Hood trailer.
Selling for $3K without motor
View attachment 1410237 View attachment 1410238 View attachment 1410239 View attachment 1410240

Not for sell after all

 

[TonyFanelli]

Not for sell after all

Noted...will delete

 

[warpt71]

Was that thing sitting at a house in Havasu forever?

Looks like the one between your house and mine. I noticed it was missing maybe a month ago?

 

[TonyFanelli]

Pinstriping done! Just some minor touch-ups, then to the water we go!

 

[Clank123]

Looks great.
I better get those exhaust inserts on the way!

 

[TonyFanelli]

Looks great.
I better get those exhaust inserts on the way!

How many decibels will it lower them? I've got some chrome water injected Bassetts from the Lavey I could put on...what do you recommend?

 

[Tommy Gun Images]

Looks like the one between your house and mine. I noticed it was missing maybe a month ago?

Right? I always thought it was a shame that thing was sitting there rotting. Hopefully it gets brought back to its former glory!

 

[OC Daytona]

My '89 Hallett Vector 454 Mag/Bravo 1

Thanksgiving weekend 1990