WELCOME TO RIVER DAVES PLACE

Carl's Howard

wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
Just a teaser...

Wait until you guys see what the brown truck is dropping off tomorrow. :)
 
Croz

Croz

Well-Known Member
Joined
Feb 25, 2014
Messages
981
Reaction score
1,752
Sharp Shooter said:
Found this in my archives from a river trip back in april 2009. We all ran down to Topock Gorge for half a day. :thumbsup

13227803_10207502645096662_3764924990754209498_o.jpg


13246263_10207502734378894_7742728246165205043_o.jpg
Click to expand...

Awesome pic! Too funny my 210 is in this pic to when I assume Cogan owned it, I will be boating in needles the weekend after memorial and hope to hit this spot with my buddies.
 
t&y

t&y

t&y
Joined
Jan 9, 2010
Messages
16,011
Reaction score
28,922
So what kind of speeds did you see at DS with the current set up? And what do you expect to see with the new prop?
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
t&y said:
So what kind of speeds did you see at DS with the current set up? And what do you expect to see with the new prop?
Click to expand...

36.

I hope more than 36. :) No idea, this is the only schoolbus I own.
 
djunkie

djunkie

Broke mo fo
Joined
Sep 24, 2007
Messages
32,821
Reaction score
4,275
wsuwrhr said:
36.

I hope more than 36. :) No idea, this is the only schoolbus I own.
Click to expand...

What's the specs on the new prop? I think I remember hearing the v-drive was 1:1. I wouldn't expect to see huge speeds out of that boat without a major upgrade in power and adding gear to it. Who cares though? It's big awesome cruiser. [emoji106]
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
djunkie said:
What's the specs on the new prop? I think I remember hearing the v-drive was 1:1. I wouldn't expect to see huge speeds out of that boat without a major upgrade in power and adding gear to it. Who cares though? It's big awesome cruiser. [emoji106]
Click to expand...

13-1/2 16P

It is a .9 in the box. I hear gears are very hard to come by for a C-500.

I'm not expecting big speeds. Just needs to be not last to arrive, by an hour. :)

She is, no doubt, ol girl even has a couch. :)
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
djunkie said:
I wouldn't expect to see huge speeds out of that boat without a major upgrade in power and adding gear to it.
Click to expand...

There was a Custom Cruiser similar UCH for sale in TN. I think that had a TT540 that made 1100HP. Went a blistering 80MPH.

That ended any idea I had of putting any power to it.

Brian
 
oldschool

oldschool

Well-Known Member
Joined
Nov 1, 2007
Messages
8,976
Reaction score
11,358
wsuwrhr said:
13-1/2 16P

It is a .9 in the box. I hear gears are very hard to come by for a C-500.

I'm not expecting big speeds. Just needs to be not last to arrive, by an hour. :)

She is, no doubt, ol girl even has a couch. :)
Click to expand...

C500 gears are hard to find and expensive. Is your C500 braced? They typically wobble a bit at idle, this is tough on the output flange. It wallows it out and can allow the prop shaft to come out under deceleration. I braced mine and had the prop shaft drilled and tapped. Then you put a bolt through the output flange into the prop shaft. The only thing holding it there now is a couple set screws.
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
oldschool said:
C500 gears are hard to find and expensive. Is your C500 braced? They typically wobble a bit at idle, this is tough on the output flange. It wallows it out and can allow the prop shaft to come out under deceleration. I braced mine and had the prop shaft drilled and tapped. Then you put a bolt through the output flange into the prop shaft. The only thing holding it there now is a couple set screws.
Click to expand...

Not yet. That is on the list of things to build. That whole box program is goofy.
 
Brian

Brian

Well-Known Member
Joined
Nov 4, 2009
Messages
865
Reaction score
605
wsuwrhr said:
13-1/2 16P

It is a .9 in the box. I hear gears are very hard to come by for a C-500.

I'm not expecting big speeds. Just needs to be not last to arrive, by an hour. :)

She is, no doubt, ol girl even has a couch. :)
Click to expand...

If it's under driven now (.9) then I think you can flip the gears and make it over driven. 10% over might be just perfect for what you want.
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
Brian said:
If it's under driven now (.9) then I think you can flip the gears and make it over driven. 10% over might be just perfect for what you want.
Click to expand...

No idea, I'll have to inquire about that, but something tells me it can't be that simple.
 
Brian

Brian

Well-Known Member
Joined
Nov 4, 2009
Messages
865
Reaction score
605
With standard split case Casale's it's that simple. I haven't really played with C-500's, but hopefully you can give em the old fliperoo and be set!
 
BUDMAN

BUDMAN

HAVASU BOUND
Joined
Jul 12, 2011
Messages
11,591
Reaction score
13,508
When are we going to lake test it again?
 
Racey

Racey

Maxwell Smart-Ass
Joined
Sep 18, 2007
Messages
22,369
Reaction score
50,918
when you move the gears around you need to reset the spacers to get the proper clearance/crush. I would probably make 4 new spacers that way you can swap back if you don't like it.

I've never done anything with a c-500 but i imagine it's the same as a split case, you just have 1 gasket instead of two. If you want to pick someone's brain you can call me and i'll put you on the phone with old man grumpy :p He's the v-drive expert, he will tell you what your clearances need to be. Basically it works by moving the gears forward makes them tighter, moving them back makes them looser, you kinda set that with the front spacers. Rear spacers keep the gears from floating backwards, and there is a tolerance there that includes the thickness of the gasket back to the bearing inner race.
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
I want to reply, but it is better I don't. :)

Racey said:
when you move the gears around you need to reset the spacers to get the proper clearance/crush. I would probably make 4 new spacers that way you can swap back if you don't like it.

I've never done anything with a c-500 but i imagine it's the same as a split case, you just have 1 gasket instead of two. If you want to pick someone's brain you can call me and i'll put you on the phone with old man grumpy :p He's the v-drive expert, he will tell you what your clearances need to be. Basically it works by moving the gears forward makes them tighter, moving them back makes them looser, you kinda set that with the front spacers. Rear spacers keep the gears from floating backwards, and there is a tolerance there that includes the thickness of the gasket back to the bearing inner race.
Click to expand...
 
Wombat

Wombat

The Great Southern land
Joined
Dec 19, 2007
Messages
6,615
Reaction score
6,159
spectras only

spectras only

Well-Known Member
Joined
Sep 20, 2007
Messages
13,333
Reaction score
13,569
the Casale 500 has spiral gears, $$$$$ to change a set.Call Casale for pricing .My Champion Ace was great,because just needed to flip to overdrive.
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
One change at a time if I can help it.

I am pretty sure UCH is going to at minimum need a set of bearings, after this water test I will know for sure.
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
HavasuHank said:
Why didnt it happen?
Click to expand...

Weather was looking bad last night and this morning and I figured if I brought the boat to the shop the prop wouldn't show. If I didn't bring the boat, it would be here at 9.

It was here at 9:30. Weather turned out marginal. Go figure. :)

Brian
 
HavasuHank

HavasuHank

"B" team gardener
Joined
Jan 18, 2008
Messages
16,134
Reaction score
6,391
wsuwrhr said:
Weather was looking bad last night and this morning and I figured if I brought the boat to the shop the prop wouldn't show. If I didn't bring the boat, it would be here at 9.

It was here at 9:30. Weather turned out marginal. Go figure. :)

Brian
Click to expand...
Usually works that way.
 
500bbc

500bbc

Well-Known Member
Joined
Oct 16, 2007
Messages
27,569
Reaction score
43,931
I have your hatch actuator Brian, can't get it to you for weeks. If anyone is leaving the SFV for Brian's neighborhood I can meet you to hand off for Brian.
 
wsuwrhr

wsuwrhr

The Masheenest
Joined
Dec 20, 2007
Messages
35,634
Reaction score
23,838
From a 12-1/4 4 blade tournament ski towboat prop to a 13.5 16p 3 blade.
 
SBMech

SBMech

Fixes Broken Stuff
Joined
Jul 25, 2012
Messages
11,627
Reaction score
20,792
That aught to give her a lil more giddy up :D :thumbsup
 
You must log in or register to reply here.
Top