Search results

6061-T6 Structural Zee Bar is available at the following vendors. It is a little different dimensionally than the Zee Bar that Schiada has custom manufactured, in that Schiada's material is 0.375 inches thick, and the material available off the shelf at these other vendors is 0.250...

Reasonable offers considered, Boat really needs to be seen in person to do it justice. Please call Daryl (818) 430-7601. Thanks Must Sell You will be noticed, and not disappointed!!!

Yes, the Hondo Pantera and the Cole Firestar share the same bottom. Cole splashed a Hondo Pantera back in the day and came up with the Cole Firestar. The difference was in the deck. The rear deck of the Hondo Pantera rolls over (has a radius) into the transom where the Cole Firestar has a small...

TTT, Reasonable offers considered, Boat really needs to be seen in person to do it justice. Please call Daryl (818) 430-7601. Thanks You will be noticed, and not disappointed!!!

TTT --- Must Sell Please call Daryl (818) 430-7601 You Will Be Noticed And Not Disappointed!!!

TTT Still for sale. Reasonable offers considered. Call Daryl (818) 430-7601

TTT

Bump, TTT

HELP !!! I need a hook up with a heating and air conditioning person in the San Diego/Pierra Santa 92124 area. I have a just under 1000 Sq Ft upstairs condo that needs new compressor and condenser units, as well as installation. Please call or text Greg @ (619) 992-9125. Thank you very much.

The hull length not including the engine, engine bracket, and cavitation plates, measures 17 feet, 10 inches, but commonly referred to as 18 feet long. Fuel tanks and carbs were drained after last running. Battery is new as of Feb.2013. Probably needs the water pump impeller changed before...

TTT

Judged one of twenty best boats at the 2013 Needles RiverDavesPlace and Custom Car Show, 1984 Hondo "T-Deck" Pantera Outboard with 1984 Mercury 200HP Black Max engine. Boat and engine have approximately 30 hours of use. Hull is a custom layup with seven gel-coat colors , and gel-coated filled...

Pete Giroux of Giroux Speed and Marine in Camarillo Ca. (1-818-203-8695) has a 17' 3" wood deck flatbottom hull pretty much striped and in need of a new wood deck and paint. He might be willing to part with it. Give him a call. Good luck, Boat Anchor

Hey Froggy, Your boat was once owned by a neighbor of mine Scott Stephens (Scott's Custom Colors) in Simi Valley, Ca. He purchased the boat in the late 1980's as a basket case from Bob Teague (Teague Custom Marine) with all the parts and needed to be reassembled. Stephens painted the...

Those parts look like rod guides for your cavitation plate control rod. They are custom made out a small length of large aluminum hex stock and black annodized. The end facing down should have a blind threaded hole used in mounting the guide to the stringer. I have seen them in Hondos and...

The first size is the size you want to use (3.0000 x 2.688 x 0.250 x 25' 0") and weighs 2.3280 lbs./ft., or 58.2 lbs./25 ft. What is the going price for 6061-T6 per pound ? Say it's $4.00/lb., would be $232.80. Have it cut in half and send 2 12.5' sticks. I'll bet it's still cheeper than what...

Hey Neil, the Sanger is looking great as usual. We still have to mount that new oil cooler you have stashed in your garage. Let me know - we'll come up with something as trick as your sea strainer mounting. Anchor

Yarde Metal Supply stocks 0.250 thick 6061-T6 "Z Bar" in two different sizes. First size is 3.0000 x 2.688 x 0.250 x 25' 0" Second size is 4.0000 x 3.062 x 0.250 x 25' 0" The only difference between what Schiada uses and this material is the thickness. (Schiada uses 0.375 inch thick vrs...

Peterson Fluid Systens has some very trick ball valves that could be used for fuel shut off valves (selector valves). You would have to run one valve for each fuel tank to a "tee" and then to the engine. This way you could run with both valves open or one valve open at a time. Just another...