Notta Sheyadda… but close.. mini schiada 12’erish…

[RiverDave]

Might be the original, the mold was popped from?

No Jim just built this one in his garage. It’s much wider and bigger than a normal Schiada 12

 

[OLDRAAT]

Hate to cap the thread, but this was on OSO. Thought it was interesting and they said it's in Havasu. Even has a cigar bote sticker.

 

[NicPaus]

Hate to cap the thread, but this was on OSO. Thought it was interesting and they said it's in Havasu. Even has a cigar bote sticker.
View attachment 1311889

It's listed here also. You should buy it and cruise the Keys!

 

[OLDRAAT]

If I lived closer, maybe. My lake is a bit rough for the little girl. OSO Member "Schweeng" had the thread.

 

[svlperry]

It’s for sale on here too

 

[MeCasa16]

This is the first I’ve seen the mini since it was buffed and delivered. The gel on this boat is truly art. Pedro knocked it out of the park. One of the biggest differences between this mini and an actual schiada mini is the rear hatch I have. Pictures do not do these fades justice, and there is just a hint of sparkle that is real subtle. Nobody is going to confuse me for a fisherman. I can’t wait to get it rigged up.

 

[mbrown2]

This is the first I’ve seen the mini since it was buffed and delivered. The gel on this boat is truly art. Pedro knocked it out of the park. One of the biggest differences between this mini and an actual schiada mini is the rear hatch I have. Pictures do not do these fades justice, and there is just a hint of sparkle that is real subtle. Nobody is going to confuse me for a fisherman. I can’t wait to get it rigged up.
View attachment 1312442 View attachment 1312443 View attachment 1312444 View attachment 1312445 View attachment 1312446 View attachment 1312447

absolute perfection.... just hang it on a garage wall as art!

 

[MeCasa16]

It’s slowly making progress.. A lot slower than promised, but… Havasu…

 

[MeCasa16]

Now 1 question for the brain trust, and 1 major hurdle still.
What prop should I try? There are a lot of options for that little motor including cleavers. I’m not going to buy a cleaver for a boat that will probably be cruising 35mph.

Next issue is the trailer. He stopped into adrenaline 2 or 3 times without so much as a call back or email. They don’t seem interested in my project, but the girl at the front desk today told me they just built one for a 10’ mini. I also stopped into the new trailer shop in town.

They had a nice little setup at the boat show, and I stopped in to see their shop. It looks nice, and the young guy I talked to seemed really nice. Sounds like his parents have owned a large welding shop in town for a long time and this is something they are branching out with. It’s only 2 guys and they seem pretty busy. He also told me they haven’t built any custom boat trailers yet, mostly jet ski and utility trailers. They do have a 19’ jet bote on the schedule so mine might be the second boat trailer they build. They are supposed to get me a general quote soon. Like everything in havasu, I won’t hold my breath for it to come quick. He seemed to think about 6 weeks if they do it. The girl at the desk at adrenaline said probably 3 months or more.. Anybody want to build a sweet trailer?? Blows my mind there aren’t better options in town.

 

[HST4ME]

Prop Finder

SOLAS® is the most well known and trusted name in outboard and stern drive propellers in the world. Available as SOLAS® Brand traditional single piece pressed rubber hub, or RUBEX® Brand interchangeable rubber hub boat propellers.

www.solaspropellers.com

 

[Dana757]

Nick at Mad Skills Fab is who I’d use for the trailer. Not in Havasu but worth the trip.

 

[MeCasa16]

Nick at Mad Skills Fab is who I’d use for the trailer. Not in Havasu but worth the trip.

I don’t have social media, so I can’t open that. Where is he located? Number?

 

[Melloyellovector]

I don’t have social media, so I can’t open that. Where is he located? Number?

He’s a member @cj222

 

[MeCasa16]

Got down here last night for the first time since June and finally got to see what’s been waiting for me in my garage;

The trailer shop was supposed to go measure while rigging was being finished, but, the guy who was doing that separated from the business so it was forgotten about. Standard Havasu. I didn’t press the issue because it was too hot to come down anyway, so it’s going in tomorrow to resume that process. I’ll get some actual good photos when I finally get to take it out. Lee (from schiada) told me at supercat fest the 12’s were originally certified for 35hp. Think I’ll have issues when I try to get get this home built registered? . I need to figure out the right prop. The basic turd on there still pushed it to 43 in its water test. I got 35 from the tohatsu 50. That was also with 2 of us in it. I’m not sure I want to go faster in this thing.

 

[MeCasa16]

Also, this is no for sale thread, but the tohatsu with all associated controls that was previously on the boat had a lot of interest before. Now that I know this heavier motor didn’t sink it, I’d like to get it out of my garage… No Lowballs! I know what I have here! The lowest hour 50hp 2 stroke out there! I don’t know the actual hours, but I’m pretty sure it’s under 10 total.

 

[RiverDave]

Who is doing the rigging?

RD

 

[MeCasa16]

Who is doing the rigging?

RD

its all finished.

Fallon Marine did it.. He had told me I couldn't get the Formula Race 60 without (APBA?) card.. Then when I talked to Lee at Supercat fest, he said he could order it for me no problem. Unfortunately I already had the 60R. The soft motor mounts and the beefier lower unit are not good for going fast. I'm not trying to win any races, so its fine.

 

[v6toy4x]

So cool!, the back story is as good as the boat!

 

[MeCasa16]

This thing is so much fun.. We took it out for a little water test today. I’m glad to see it didn’t sink with both of us in it and the heavier motor on the back.

 

[joecfd1]

This thing is so much fun.. We took it out for a little water test today. I’m glad to see it didn’t sink with both of us in it and the heavier motor on the back. View attachment 1433513 View attachment 1433514 View attachment 1433515 View attachment 1433516

I saw it on Palo Verde North and the 95 this afternoon. Beautiful

 

[MeCasa16]

So since I’ve been gone, the last piece for this finally showed up. I think in total it was just over 9 months to build. Also, not even close to the rims I had picked out, but whatever… I just wanted to get it at this point. I will say, the quality of the trailer is top notch. I won’t be moving this one by hand though. Now I gotta find time to go swap it onto the new one. The old one is available if anyone is interested

 

[HNL2LHC]

That trailer is bad ass!!!! I’ll take the old one if you throw in the boat too. If not the mini I’d take the Howard. LOL

 

[Tank]

So bad ass!!!

 

[v6toy4x]

Too Cool, I would have thought tandems on something that short would have looked over bearing but the proportions look great!

 

[MeCasa16]

Swapped it out quick.. $20 for the second truck to get in on a Monday? WTF

 

[JFMFG]

Swapped it out quick.. $20 for the second truck to get in on a Monday? WTF View attachment 1486114 View attachment 1486115 View attachment 1486116

Looks great I would have went to site 6 this time of year to save the coin.

 

[MeCasa16]

Looks great I would have went to site 6 this time of year to save the coin.

I definitely should have.. Had I known they raised the price so much I would have.

 

[JFMFG]

I definitely should have.. Had I known they raised the price so much I would have.

Trailer came out awesome.

 

[MeCasa16]

Trailer came out awesome.

It’s definitely nice having a trailer actually built for the boat. My only complaint is that the emergency cables need to be a little longer for my truck. That should be an easy fix for them. I do appreciate Addrenaline picking it up and dropping it off at my house when they needed it and then delicate trailer when I couldn’t be there. 18 months start to finish on this little boat. $50k all in if anyone is curious. Things really escalated. It’s not an investment, and it should last forever.

Side note, I would like to get decals for the motor that match the colors of the boat. Does anyone know where I can get that done in havasu?

 

[Outdrive1]

Looks great! Nice job restoring it

 

[Marko]

Her father is an inmate here. He had a purple schiada that he scaled this version down from. This is why this particular boat is so sentimental to her.

Was he "Frozen Jim" by chance? Purple Schiada named "Never Again"?

 

[MeCasa16]

Was he "Frozen Jim" by chance? Purple Schiada named "Never Again"?

Yes

 

[WTR&PWR]

looks great! Did you sell the tohatsu?

 

[gqchris]

It’s definitely nice having a trailer actually built for the boat. My only complaint is that the emergency cables need to be a little longer for my truck. That should be an easy fix for them. I do appreciate Addrenaline picking it up and dropping it off at my house when they needed it and then delicate trailer when I couldn’t be there. 18 months start to finish on this little boat. $50k all in if anyone is curious. Things really escalated. It’s not an investment, and it should last forever.

Side note, I would like to get decals for the motor that match the colors of the boat. Does anyone know where I can get that done in havasu?

Id have to remove that giant Adrenaline decal off the trailer. My eyes just go right to it everytime I look.

Amazing machine and 50k is right above what I ended up being in my Baker. I was right at 40k, it adds up very quickly!

 

[DLC]

Oh My ! That turned out awesome ! Absolutely Beautiful.

She’s a Bute Clark !

Can’t wait to see it in person !

Congratulations ! What an awesome addition

 

[Dog]

Too Cool, I would have thought tandems on something that short would have looked over bearing but the proportions look great!

How about triples?

New 12’ Schiada trailer by Adrenaline!!

Came out Sweet! Has up lights / Down lights / full beamless torsion suspension / removable tongue / 12 inch wheels! Joe did an awesome Job! Can’t wait to see the boat on it!

www.riverdavesplace.com

 

[v6toy4x]

 

[Orange Juice]

View attachment 1487607

The miss piece to this project, a mini tow vehicle.

 

[02HoWaRd26]

GatorWraps does all the decals for DCB from what i understand. Definitely worth a call specially as they’re there in Havasu.
Came out amazing will it be named?

 

[MeCasa16]

GatorWraps does all the decals for DCB from what i understand. Definitely worth a call specially as they’re there in Havasu.
Came out amazing will it be named?

That’s great information, I’ll stop in and talk to them next time I’m in town. We don’t have anything in mind yet for a name..

 

[MeCasa16]

How about triples?

New 12’ Schiada trailer by Adrenaline!!

Came out Sweet! Has up lights / Down lights / full beamless torsion suspension / removable tongue / 12 inch wheels! Joe did an awesome Job! Can’t wait to see the boat on it!

www.riverdavesplace.com

If I could have gotten golf cart rims and tires, I’d have been all about it.

 

[Community]

That’s crazy, I’ve talked to you before but never knew you were Jim’s son in law. I’ve know Jim a long time.

FrzJim? How is he?

 

[SOCALCRICKETT]

Swapped it out quick.. $20 for the second truck to get in on a Monday? WTF View attachment 1486114 View attachment 1486115 View attachment 1486116

That was you??



I was the guy in the dually helping my brother launch his mastercraft that day

 

[02HoWaRd26]

That’s great information, I’ll stop in and talk to them next time I’m in town. We don’t have anything in mind yet for a name..

Griner had some other shop at his shop today that was doing decals on an OB when I was there.

 

[MeCasa16]

FrzJim? How is he?

He is good, seems to always be traveling.

That was you??



I was the guy in the dually helping my brother launch his mastercraft that day

Ya, sorry I was in such a hurry. I wish I’d have had time to take it for a quick rip.

 

[Croz]

I’m late to this thread and just caught up. This was so fun to follow. That thing came out beautiful! Well done guys

 

[SOCALCRICKETT]

He is good, seems to always be traveling.

Ya, sorry I was in such a hurry. I wish I’d have had time to take it for a quick rip.

No worries, we were on our way out for birthday cake on the lake anyway. It was my 8 year old niece's birthday