WELCOME TO RIVER DAVES PLACE

The Outboard Church

HST4ME

Well-Known Member
Joined
Nov 9, 2015
Messages
7,568
Reaction score
17,739
I have a 15 in mid for am omc .twin. they are cheap to build and light.

I can come up with enough things to make that merc a 15 inch probably.

Might have to have a drive shaft cut. It's not going to work with that 20 inch motor, the prop shaft needs to be within an inch or two of the sponsors.

I'll see what I can come up with when I get home from Florida.
 

lake p.a.l.

Well-Known Member
Joined
Jun 18, 2009
Messages
6,148
Reaction score
10,500
I have a 15 in mid for am omc .twin. they are cheap to build and light.

I can come up with enough things to make that merc a 15 inch probably.

Might have to have a drive shaft cut. It's not going to work with that 20 inch motor, the prop shaft needs to be within an inch or two of the sponsors.

I'll see what I can come up with when I get home from Florida.
Open to all suggestions & like to make it sound as rowdy as it can
 

clarence

Well-Known Member
Joined
Jun 22, 2019
Messages
2,881
Reaction score
4,559
The waterfront bars/restaurants are open year round?

How many months of the years is the C-Dory the boat of choice?

Would a canvas/plastic bimini full enclosure compare?
 

lake p.a.l.

Well-Known Member
Joined
Jun 18, 2009
Messages
6,148
Reaction score
10,500
The waterfront bars/restaurants are open year round?

How many months of the years is the C-Dory the boat of choice?

Would a canvas/plastic bimini full enclosure compare?
There's a handful open year round @ various parts of the lake. We run his C Dory & our cruiser with full eisenglass all year. We have those lil buddy propane heaters to warm up as needed. Our cruiser has an automatic bilge heater that kicks on @ 36° as needed.
Bimini with full enclosure would work fine with a lil heater.
Hope to get some friends out tomorrow on our cruiser.
 

War Canoe

Stainless Member
Joined
Sep 18, 2012
Messages
3,414
Reaction score
9,967
New ECU …no rev limiter and better fuel curve! Also, the engine will breathe easier with cowl opened up. Re-routed air compressor pump water thru the port fuel rail for more cooling. Dreading cutting the face of this cherry cowling, but it needs more air and it looks pretty stock. The engine will be a little louder with the cowl modified. Cleaned the water line filter that is down in the lower block while I was at it. It had debris all over it.
CB9298D6-1779-4865-A394-2ADE3BF8B572.jpeg
102ACA0C-6B35-4B1B-A408-F97835250469.jpeg
F18E0E63-74AA-410C-9C0E-35DCCBF3892E.jpeg
0FF996A2-A4FE-4E7A-82E1-98954ADABBE9.jpeg
 
Last edited:

War Canoe

Stainless Member
Joined
Sep 18, 2012
Messages
3,414
Reaction score
9,967
Tested the DBR mods today…The Blue Canoe is getting more formidable. This is the 3 mile straightaway at the afterbay. The new mods bumped me from a redline 107 mph, to over 110 mph. Same prop. 30 BBlades.
22D0AA02-7CD3-4839-9888-09715239A1D4.jpeg
 

War Canoe

Stainless Member
Joined
Sep 18, 2012
Messages
3,414
Reaction score
9,967
It’s going to be a barn burner in the Delta on Sunday!!
Looks like a big turnout…
Kev/Mirage
Andrew/Mirage
Steve/Mirage
Smiley/STV
WC/ STV
Drew/STV
Andy/GMT
1B662F92-1B63-44CF-97DF-AB5BEAF15C47.jpeg
 
Top