Square body Chevy Thread....

[E4L]

Getting closer

 

[86TexasMojo]

I have an 86, not quite as fancy as some of these other rigs!

 

[E4L]

I have an 86, not quite as fancy as some of these other rigs!

Very nice I miss my 88

 

[Abc123]

Does anyone know of a 3rd gen for sale? I'm looking for a runner with a straight body.

 

[shan]

Does anyone know of a 3rd gen for sale? I'm looking for a runner with a straight body.

I have an '87 short box, loaded. It runs, body straight except a door fender issue. Original paint and everything. 100k+miles.

 

[Abc123]

I have an '87 short box, loaded. It runs, body straight except a door fender issue. Original paint and everything. 100k+miles.

Pictures and price? Which engine?

 

[shan]

Pictures and price? Which engine?

350 tbi, 700 R4. I think 3.08 final drive. Wasn't really thinking about selling it, but need to think about cleaning out the back yard. I can get pictures if you're serious.

 

[BajaMike]

This one will work for me for a while......





:thumbup:


Need one with the OP6 sticker.

 

[SoCalZero]

Picked this up a few months ago.
1982 454/350trans
I don't care for the two tone.

 

[Tank]

Kids room.

 

[Abc123]

350 tbi, 700 R4. I think 3.08 final drive. Wasn't really thinking about selling it, but need to think about cleaning out the back yard. I can get pictures if you're serious.

Pm sent

 

[blue2184]

Here's my 82

 

[E4L]

350 tbi, 700 R4. I think 3.08 final drive. Wasn't really thinking about selling it, but need to think about cleaning out the back yard. I can get pictures if you're serious.

Let's see it

 

[Tank]

Saw this on Craigslist. Needs TOC but sweet bagged c10 for 6500.



http://ventura.craigslist.org/cto/5730025617.html

 

[HOOTER SLED-]

Saw this on Craigslist. Needs TOC but sweet bagged c10 for 6500.

View attachment 504849 View attachment 504850 View attachment 504851

http://ventura.craigslist.org/cto/5730025617.html

Clean, but that grill sucKS balls.

 

[rivrrts429]

Love the square bodies. Pretty cool find….

@H20 Toie
@Tank

 

[69hondo]

I have a 76. My dad bought it new in 76. Been mine since 95. Drove the shit out of it. Tucked away on the garage waiting it's turn.

 

[Cray Paper]

I know this post has been dormant for a couple of years but my ex decided to return photos I took before I met her in 1995 just this past weekend and I'm looking to join the squarebody previous owner club
I bought a 74 K5 blazer from a interesting character in Sacramento in 1989, it had several bullet holes in it that according to Steve (very intelligent black guy, that is another story) were from a Asian rival gang, dude spent several years in federal prison for running guns in the mid eighties.

Anyhow, this was my 74 K5 Blazer, 350, AC, auto hubs, deluxe interior (woodgrain inlays in door panels and dash, chrome strips on the door felts etc). Also had 86ish Fierro cloth seats, roll bar, center console and power rear window. It was a nice rig, but had almost zero structural rigidity when wheeling. If the top was off the doors would pop open going over whoops / really uneven terrain. Upside was my KX250 fit with the tailgate up with the top off, used to ride the bike into the back and a couple of times almost wound up on the hood. The front tire really grabbed on the carpet!
I put a 3" lift on it and 33" BFG's, rebuilt the engine and transmission, it was fun in the summer, not so much in the winter when I moved back to the PNW. That full fiberglass top took forever to warm up but when it did the ice that formed on the inside would turn to water and hit me in the back of the head when getting off the freeway on really cold mornings. I traded it in on my 87 IROC when I noticed the rear leaf springs were cracked right above the axle. I saw it last about 10 years ago, hope someone gave it the attention it deserves.

 

[fat rat]

My 1987, bought new and made it a 40 year project.

 

[bonesfab]

A few of mine. The big orange one was a full frame off 25 years ago. The blazer I parted ways with for a while and then got it back after 15 years. Then did a full frame off on it after I got it back a few years ago.

 

[Cdog]

Square bodies Dad

 

[=River Perfection=]

 

[92562]

'73 Cheyenne Super, Camper Special with a 454. Wish I still had it. It was the first vehicle I ever painted. I eventually got the front wheels to match. Yes, those are white jeans and they made my ass look great!

 

[Smupser]

I know this post has been dormant for a couple of years but my ex decided to return photos I took before I met her in 1995 just this past weekend and I'm looking to join the squarebody previous owner club
I bought a 74 K5 blazer from a interesting character in Sacramento in 1989, it had several bullet holes in it that according to Steve (very intelligent black guy, that is another story) were from a Asian rival gang, dude spent several years in federal prison for running guns in the mid eighties.

Anyhow, this was my 74 K5 Blazer, 350, AC, auto hubs, deluxe interior (woodgrain inlays in door panels and dash, chrome strips on the door felts etc). Also had 86ish Fierro cloth seats, roll bar, center console and power rear window. It was a nice rig, but had almost zero structural rigidity when wheeling. If the top was off the doors would pop open going over whoops / really uneven terrain. Upside was my KX250 fit with the tailgate up with the top off, used to ride the bike into the back and a couple of times almost wound up on the hood. The front tire really grabbed on the carpet!
I put a 3" lift on it and 33" BFG's, rebuilt the engine and transmission, it was fun in the summer, not so much in the winter when I moved back to the PNW. That full fiberglass top took forever to warm up but when it did the ice that formed on the inside would turn to water and hit me in the back of the head when getting off the freeway on really cold mornings. I traded it in on my 87 IROC when I noticed the rear leaf springs were cracked right above the axle. I saw it last about 10 years ago, hope someone gave it the attention it deserves.

Nice man, I have a 73’ jimmy and a 74’ blazer plus 2 more square body trucks, they’ve been a life long passion of mine along with guns, jetboats, whiskey and philly cheesesteaks

 

[bonesfab]

Nice man, I have a 73’ jimmy and a 74’ blazer plus 2 more square body trucks, they’ve been a life long passion of mine along with guns, jetboats, whiskey and philly cheesesteaks

I feel your pain. I am at 8 right now on square bodies. 3 crew cabs, 2 k5 blazers , one c10 short bed, another c10 long bed and a c20 long bed that I am trying to sell.

 

[Smupser]

I feel your pain. I am at 8 right now on square bodies. 3 crew cabs, 2 k5 blazers , one c10 short bed, another c10 long bed and a c20 long bed that I am trying to sell.

You can never have too many squares

 

[dirtslinger2]

I had this not too long ago, sold it to buy another car. Wish I would have kept it now.

 

[rivergames]

My Daily Driver 1990 K5

 

[Daytona47]

This is my 77 original shortbed c notch. I took the 496 out of a 21 Schiada v drive I bought and stuck it in there.

 

[TonyFanelli]

Gotta love em. Drive mine weekly. 1975 K10, new 350, 4 speed, dana 44's, ¾ ton suspension, Warn hubs, no rust, crank windows, no AC.
Just put a new glove box in as the original plastic broke and the damn thing fell on the floor!

 

[JJ McClure]

A few of mine. The big orange one was a full frame off 25 years ago. The blazer I parted ways with for a while and then got it back after 15 years. Then did a full frame off on it after I got it back a few years ago. View attachment 1433263 View attachment 1433264 View attachment 1433265 View attachment 1433266 View attachment 1433268 View attachment 1433269

Nice squares. Where’s the GoldRoof?

 

[BRONCOBOY]

I believe the Largest Chevy only truck show is now DINO'S GITDOWN in Glendale Az at the stadium. Last year had over 200 vendors and 8000 trucks were there. The show is Nov 15 weekend and no charge for parking or entry, if your into these trucks every supplier will be there. Im going to be a exhibitor for the first time, Elite Billet Automotive Products. We will have GM licensed billet products no one has ever produced before - looking forward to this circus!

 

[MeCasa16]

Square bodies Dad
View attachment 1433270
View attachment 1433271

Omfg that’s beautiful…

 

[76 Hondo]

89’ Sub 2500, 454 had to get a gas credit card for the first time, even with gas cheap compared to now couldn’t carry enough cash to keep it fed

 

[Cdog]

Omfg that’s beautiful…

Thank you!

 

[Cousineddy]

I just pulled this one out of a friend’s garage, been sitting for 18 years. Excited to get it back on the road.

 

[dirtslinger2]

I just pulled this one out of a friend’s garage, been sitting for 18 years. Excited to get it back on the road.

Have we met?

 

[Cousineddy]

Have we met?

Possibly?

 

[bonesfab]

Nice squares. Where’s the GoldRoof?

In the garage. Forgot to post that pic.

 

[bonesfab]

Another one. Been daily driving this one lately. 6.0 ls. 4l80 swap. Rides and drives pretty good for a 35 year old truck. Ice cold ac.

 

[dirtslinger2]

I'm basing it off your profile picture, is that your car?

 

[bonesfab]

And GLDTOOF. And Sparky the lowered 72.

 

[Cousineddy]

I'm basing it off your profile picture, is that your car?

Yes it is

 

[Smupser]

And GLDTOOF. And Sparky the lowered 72. View attachment 1433647 View attachment 1433648

Is the white full top factory 2wd or did you convert it?

 

[bonesfab]

Is the white full top factory 2wd or did you convert it?

factory 2wd along with the green one is also.

 

[Sharp Shooter]

I saw this one today at the Costa Mesa show.

 

[Eliminator21vdrive]

I may have a weak moment.

 

[Dog]

Can we go back to the prices in the beginning of this thread? Please?

 

[TonyFanelli]

I may have a weak moment.

View attachment 1434293

Git it.....!

 

[TrollerDave]

I may have a weak moment.

View attachment 1434293

I don’t know what it is about a square body stepside, but I LOVE em!

There is one like that by me, but faded red. I have been eyeing it for years. The lot is full of old cars and truck, even an old 18’ Kona with an outboard. Stuff has been sitting for years and the guy just keeps getting more. Won’t sale anything. Sad.