Schiada Trailer Build

[cj222]

Last month I started the build of a new custom trailer for a new Schiada 24ft V-drive. Here are some photos of the build so far. I will update as I move forward with the build.

 

[cj222]

 

[cj222]

 

[cj222]

Got both inner bunks and supports positioned tonight.

 

[cj222]

Got both outer bunks and supports positioned now.

 

[cj222]

Next is the bow rest

 

[cj222]

Got the bow rest built and welded in place.

 

[hallett21]

 

[cj222]

Keel support tacked in place. That small boxed in area will be the hidden storage compartment for the electric over hydraulic brake system covered with a billet polished aluminum plate.

 

[cj222]

Guide poles built

 

[cj222]

Getting the floor supports in place. Floors will be 1/8" aluminum sheet powdercoated with Prismatic Black Super Grip

 

[hallett21]

Badass!!! Thanks for sharing!

 

[cj222]

 

[NicPaus]

Very Nice!

Is that a new hull? Perfection!

 

[cj222]

Very Nice!

Is that a new hull? Perfection!

Yes new hull and thank you!

 

[Singleton]

Yes new hull and thank you!

new trailer matches the lines of the boat so much better

 

[LazyLavey]

What's that suspension?

 

[cj222]

What's that suspension?

They are torsion half axles

 

[GregG]

Damn, you have mad skills, very nice build

 

[Ladsm]

Super Bitchen. Time to up the rest of the crowd and go quad axles. That will blow peoples minds!!!!

 

[cj222]

Super Bitchen. Time to up the rest of the crowd and go quad axles. That will blow peoples minds!!!!

 

[cj222]

Damn, you have mad skills, very nice build

Thank you!

 

[cj222]

Added a prop guard, boxed pods for roller wheels, and all the floor supports for the aluminum floor panels.

 

[cj222]

Machined the rear step plates.

 

[FF42]

Machined the rear step plates. View attachment 1452095 View attachment 1452096 View attachment 1452097

Looking awesome.

 

[cj222]

Looking awesome.

Thank you!

 

[DLC]

That is a work of ART !

Love It !

Absolutely Bad Ass …

Questions -

Did you draw that up in cad ? Then build ?

Or
Just Wing it? Thinking about this / that at night when you’re supposed to be sleeping ….



The way I see the boat and trailer together - is it fits like a glove! The trailer is cradling the boat. It flows together !

The before on the blue trailer the boat is resting/ sitting on TOP of a trailer …

 

[DLC]

Oh what color are ya thinking ?

What about lights & Run way lights?

Can’t wait to see what’s next…

 

[oldman]

Nice touch on the rollers, I added those on our tournament boat trailer. I reworked the back of the trailer so I could countersink them in.
Factory was flat stock.

Beautiful Work.

 

[cj222]

That is a work of ART !

Love It !

Absolutely Bad Ass …

Questions -

Did you draw that up in cad ? Then build ?

Or
Just Wing it? Thinking about this / that at night when you’re supposed to be sleeping ….



The way I see the boat and trailer together - is it fits like a glove! The trailer is cradling the boat. It flows together !

The before on the blue trailer the boat is resting/ sitting on TOP of a trailer …

Thank you!
It's all in my head and vision. I don't have Autocad or even a computer lol.
For lighting it will get frenched in taillights and clearance lights in the steps as well. Steps will have billet aluminum plates also. Trailer will also have chrome fenders and guide posts and the color will be black.

 

[cj222]

Nice touch on the rollers, I added those on our tournament boat trailer. I reworked the back of the trailer so I could countersink them in.
Factory was flat stock.

Beautiful Work.

Thank you! I have seen some old trailers that have the flat stock hoop for a rudder gaurd that are ground down paper thin from all the years of dragging on the ground lol

 

[oldman]

Thank you! I have seen some old trailers that have the flat stock hoop for a rudder gaurd that are ground down paper thin from all the years of dragging on the ground lol

This 100%
The flattie in my Avatar was that. It looked like a razor blade. I forgot I reworked that one also.

Again Beautiful Nice attention to detail.

 

[cj222]

This 100%
The flattie in my Avatar was that. It looked like a razor blade. I forgot I reworked that one also.

Again Beautiful Nice attention to detail.

Haha yeah and that is what is holding the back end of the trailer together. And some particular trailers that 1/4" flat bar hoop for a rudder gaurd is welded to 14ga sheetmetal steps

 

[oldman]

Haha yeah and that is what is holding the back end of the trailer together. And some particular trailers that 1/4" flat bar hoop for a rudder gaurd is welded to 14ga sheetmetal steps

I redid the rudder guard on the flattie with 3/8"x2" everywhere and integrated a couple of rollers on the back edge. I swear that thing is only a couple inches off the ground.

I'll stop the derail and follow the build.

 

[cj222]

I redid the rudder guard on the flattie with 3/8"x2" everywhere and integrated a couple of rollers on the back edge. I swear that thing is only a couple inches off the ground.

I'll stop the derail and follow the build.

Nice! My Howard trailer I built is slammed and only 2" off the ground to the rollers. It will drag everywhere but look cool

 

[mash on it]

Nice! My Howard trailer I built is slammed and only 2" off the ground to the rollers. It will drag everywhere but look cool

Praise the Lowered.

Pure artwork.

Dan'l

 

[River Dirt 2]

Machined the rear step plates. View attachment 1452095 View attachment 1452096 View attachment 1452097

He’s going to need way more aluminum than that to keep polished!

 

[FF42]

He’s going to need way more aluminum than that to keep polished!

Don’t you worry, more is coming!

 

[cj222]

Fenders arrived today. Will be getting my measurements and setting these up soon as well as making the steps.

 

[cj222]

Got all the floor panels cut. Time to get them all pre drilled and fastened before send them off to the powdercoater for Prismatic Super Grip Black.

 

[240Hallett]

Fenders arrived today. Will be getting my measurements and setting these up soon as well as making the steps. View attachment 1452489 View attachment 1452490

Perfect radius match.

 

[cj222]

Perfect radius match.

Yeah buddy! Hand formed