RDP'S "What are you working on?"

[coolchange]

But a nautical mile is 6,000 feet because seaman can only work in round numbers.

That’s what my Army grandfather and father told me.

But it still only takes a minute

 

[530RL]

 

[evantwheeler]

Found another one that needed to be saved. SBC swapped and not pre-smog, so I get to figure that out, but it was just too clean, original and cheap to pass on it. Have always wanted a white one....came with the original white driver, passenger & rear doors, just need to find some hardtop sides to put it back to original look. This one will get 4" spring under lift and some tall skinnies, rebuilt/recovered factory buckets, along with a bunch of elbow grease to clean up all the original paint.

 

[Ducksquasher]

Found another one that needed to be saved. SBC swapped and not pre-smog, so I get to figure that out, but it was just too clean, original and cheap to pass on it. Have always wanted a white one....came with the original white driver, passenger & rear doors, just need to find some hardtop sides to put it back to original look. This one will get 4" spring under lift and some tall skinnies, rebuilt/recovered factory buckets, along with a bunch of elbow grease to clean up all the original paint.

View attachment 1461714 View attachment 1461715 View attachment 1461716 View attachment 1461717 View attachment 1461718 View attachment 1461719 View attachment 1461720 View attachment 1461721

Sweet!

 

[coolchange]

View attachment 1461713

You do that? FAA fire approve material?

 

[530RL]

You do that? FAA fire approve material?

It’s a certified interior complete with 8130. Given each ship is different, it just has to be individually installed.

 

[coolchange]

Haven’t made the wife anything for a while.

 

[coolchange]

It’s a certified interior complete with 8130. Given each ship is different, it just has to be individually installed.

Made a couple experimental interiors. Looked into certified.

 

[Kachina26]

Found another one that needed to be saved. SBC swapped and not pre-smog, so I get to figure that out, but it was just too clean, original and cheap to pass on it. Have always wanted a white one....came with the original white driver, passenger & rear doors, just need to find some hardtop sides to put it back to original look. This one will get 4" spring under lift and some tall skinnies, rebuilt/recovered factory buckets, along with a bunch of elbow grease to clean up all the original paint.

View attachment 1461714 View attachment 1461715 View attachment 1461716 View attachment 1461717 View attachment 1461718 View attachment 1461719 View attachment 1461720 View attachment 1461721

No sediment trap on the water heater?

 

[evantwheeler]

No sediment trap on the water heater?

Must not?

 

[NicPaus]

Must not?

They weren't required for 50 years and I never heard of it being an issue. So I wouldn't worry about it. Pretty soon we won't be allowed gas water heaters anymore as it is.

I bought 2 water heaters yesterday. 1 electric and 1 electric heat pump. $335 plus tax and $1695 plus tax. The one will take about 10 years to pay for itself if it lasts that long. But customer is going to swap it after final inspection.

 

[Kachina26]

Must not?

They weren't required for 50 years and I never heard of it being an issue. So I wouldn't worry about it. Pretty soon we won't be allowed gas water heaters anymore as it is.

I bought 2 water heaters yesterday. 1 electric and 1 electric heat pump. $335 plus tax and $1695 plus tax. The one will take about 10 years to pay for itself if it lasts that long. But customer is going to swap it after final inspection.

Just goofing around. I put one on my water heater that I replaced before I moved so the home inspector wouldn't give me any grief.

 

[TPC]

5 years ago the wifes Mazda 6 tires started to delaminate.
She went in to where she bought them and even though she bought the "covered for everything except vandalism" warranty the tire store pulled the "Not covered under ozone damage" excuse.

An email to the company HQ got her a replacement set of tires free and an apology phone call. All in under 24 hours.

Happened again this past week. They pulled the "ozone did it" BS and fucked her $1121 for a set.
I emailed again and yesterday I got her $1121 back,, under 24 hours.

 

[530RL]

Almost complete…..

 

[petie6464]

View attachment 1454432

 

[monkeyswrench]

View attachment 1462262

Looks like new, only better! What else did you do to the motor? Did you do a cam by any chance? I've only heard "race" cams in 12 valves, never like an "RV" type or milder one. Kind of wondering if you'd hear it.

 

[Justsomeguy]

lash the valves in the am and cover it up. Start putting i jectors and their fuel lines in. Getting close.

Unfortunately before I got to this point i learned my torque wrench shit the bed.

But i got it out.

 

[Rennsport]

Installing wireless shifting on my mtb

 

[monkeyswrench]

Installing wireless shifting on my mtb

View attachment 1462338

Paddle shift?!

 

[Justsomeguy]

It's looking like an engine again. Valves are adjusted. Injectors are in. Return lines laid. Start some odds and ins tomorrow. I'm really kind of setting a goal to start it on my birthday next week.

 

[NicPaus]

Just got home from finishing this bathroom. Final details that seem to take forever. Inspection tomorrow so had to get it done tonight.

Spent yesterday doing the final details on a kitchen. Just need to cut in the cook top tomorrow.

Trying to get final inspection on another 1 this week.

Framing and rough mechanical on another.

And got appliances being delivered on Thursday to a different 1.

Hvac guy finishing up another 1 tomorrow.

1 more big remodel and the goal was get the tub set and valves installed. Just waiting on homeowners decision. And hvac guy to get by there.

Trying to clear my plate of a few before New Years. Got a few ready to start.

 

[530RL]

Just got home from finishing this bathroom. Final details that seem to take forever. Inspection tomorrow so had to get it done tonight.

Spent yesterday doing the final details on a kitchen. Just need to cut in the cook top tomorrow.

Trying to get final inspection on another 1 this week.

Framing and rough mechanical on another.

And got appliances being delivered on Thursday to a different 1.

Hvac guy finishing up another 1 tomorrow.

1 more big remodel and the goal was get the tub set and valves installed. Just waiting on homeowners decision. And hvac guy to get by there.

Trying to clear my plate of a few before New Years. Got a few ready to start. View attachment 1462656 View attachment 1462657 View attachment 1462658

Looks great.

People need to get those bathroom prjects done before California bans engineered silica stone.

 

[NicPaus]

Looks great.

People need to get those bathroom prjects done before California bans engineered silica stone.

Thanks.

Kitchens as well. Everyone and there Mom wants white quartz. Where I buy it they have over a million dollars ofvl inventory on hand. Not many options in stock on the shower panels. But hundreds of options for countertops.

 

[530RL]

Thanks.

Kitchens as well. Everyone and there Mom wants white quartz. Where I buy it they have over a million dollars ofvl inventory on hand. Not many options in stock on the shower panels. But hundreds of options for countertops.

We are up to 40,000 slabs a month and cannot keep up. The demand is just crazy.

 

[530RL]

Slow but steady progress.

And a video from the recent annual fly in.

 

[Cdog]

Set up for next season. Headed to set up guru’s shop.

Testing next Saturday at podium club

 

[Cdog]

68 Shelby Lonestar

 

[Cdog]

 

[Justsomeguy]

it's getting close!

 

[Cdog]

Got my hood & cowl re sprayed

 

[coolchange]

Rod bolts look GOOD!

 

[4Waters]

Rod bolts look GOOD!
View attachment 1463234

Get your current covid booster and eat a sandwich with those greasy hands

 

[coolchange]

Get your current covid booster and eat a sandwich and take a leak with those greasy hands

Fixed it for ya…

 

[Cdog]

The perfect pizza

 

[Livewire Fabworks]

The perfect pizza

Did a couple of pizzas last night for Christmas eve. Always messing with my dough recipe and sauce recipe. Wife and friends gave me the thumbs up on the best pizza's yet.

 

[Cdog]

Did a couple of pizzas last night for Christmas eve. Always messing with my dough recipe and sauce recipe. Wife and friends gave me the thumbs up on the best pizza's yet.

Nice!

We did too. Had a leftover dough so figured why not for lunch

 

[Livewire Fabworks]

Nice!

We did too. Had a leftover dough so figured why not for lunch

Can't ever go wrong with pizza!! Looks awesome.