Post Pictures of your work....

[River Lynchmob]

Here's the shop interior:

 

[Photo Chick]

Here's the shop interior:

Ok only a couple are blury..........you're getting better! :thumbsup

 

[knuckle head]

:thumbsup

 

[westair]

Here's the shop interior:

Nice! Are you guys an AC company with a nice shop or sheet metal shop that sells to AC companies.

 

[River Lynchmob]

Nice! Are you guys an AC company with a nice shop or sheet metal shop that sells to AC companies.

We are an HVAC company with a shop that also sells to other companies...need some duct work built?

 

[akakiller]

when I'm not lurking here...

 

[River Lynchmob]

Ok only a couple are blury..........you're getting better! :thumbsup

I'm taking a photography class so it looks like it's paying off that or taking lessons from RD

 

[Boobybouncer]

My cousin just might fight you for him, why I have no idea! :smackhead

Bach of Zoology! But the pay stinks!

your cousin obviously has better taste than you

 

[RitcheyRch]

I think I used AutoCad about 20 years ago.

Am fluent with Unigraphics NX4 and Catia V5.

I have almost every design software available. Let me know if you want to try something.

heh, i got certified for autocad r14.....never touched it again after i graduated 11 years ago.....sure has changed a lot since. i thought about picking it back up to design some trick rigging hardware.

 

[westair]

We are an HVAC company with a shop that also sells to other companies...need some duct work built?

That is luxury there with that setup, were down in North County SD, been buying our sheet metal from Omni Duct for years, you guys are in LA Co.?

 

[River Lynchmob]

That is luxury there with that setup, were down in North County SD, been buying our sheet metal from Omni Duct for years, you guys are in LA Co.?

We're in Irwindale so ye we are in LA County. We don't manufacture any round just rectangular.

It works out very well for us. Many people dont see the use of having their own shop as they claim they dont save any money...I don't know what I would do without a shop it saves on time plus I can put anyone in the shop I want. I buy the steel for th esame price within a couple of cents that everyone else does plus we are union and I would have to buy from a union shop and I know I produce it faster than any shop out there plus I don't have to pay anyones mark up. I can also burn a part and have it done in an emergency. I think there are too many advantages to having a shop not to have one.

 

[CornWater]

Lotting study for potential 125± commercial development...

 

[Flying_Lavey]

I'm taking a photography class so it looks like it's paying off that or taking lessons from RD

No the lessons from RD are the reason why they arent all nice and straight. lol! Must be nice having that HUGE shop!

 

[River Lynchmob]

No the lessons from RD are the reason why they arent all nice and straight. lol! Must be nice having that HUGE shop!

It is very nice...who builds your duct work?

 

[Photo Chick]

I'm taking a photography class so it looks like it's paying off that or taking lessons from RD

I'm thinking it's that class....:thumbsup

your cousin obviously has better taste than you

In what...........shoes...........

 

[BajaMike]

One of my "offices".....





:beer

 

[Flying_Lavey]

It is very nice...who builds your duct work?

We have a guy in Pamona (shoulder's Sheet metal) do the smaller jobs for us. If not, we have Omni or Pacific Duct or Oreco do it.

 

[River Lynchmob]

We have a guy in Pamona (shoulder's Sheet metal) do the smaller jobs for us. If not, we have Omni or Pacific Duct or Oreco do it.

I hear Shoulders is retiring soon. I know I can beat those three on price I do all the time.

 

[emf]

Emil Miller fab, aluminum work for sandrails@ utvs 909-783-7512

 

[Flying_Lavey]

I hear Shoulders is retiring soon. I know I can beat those three on price I do all the time.

Yeah he is. Apparently us and the Abbey company are the only ones keeping his doors open right now. Gave him $20,000 in work in June alone. lol!

 

[River Lynchmob]

Emil Miller fab, aluminum work for sandrails@ utvs 909-783-7512

Nice shop :thumbsup

 

[emf]

thank you ! Emil

 

[DirtyWhiteBoy]

I only have a few pics of his work

 

[rvrgirl]

That is luxury there with that setup, were down in North County SD, been buying our sheet metal from Omni Duct for years, you guys are in LA Co.?

Before moving to Arizona. I worked for PENCOM FASTENERS. Have you heard of them? They sell sheet metal ect... My mom still works for them. If you ever need a quote on anything PM me. I will give you Sheila's information. She works outside sales ect...
Heather

 

[musicFunsun]

This is what I do most days... Finding a job in this economy sucks !!! :swear

Hey, me too. Looking for work is really hard work

 

[Universal Elements]

This is what I do most days... Finding a job in this economy sucks !!! :swear

What type of work are you looking for?

 

[Yellowboat]

I get paid to make messes in peoples homes, I just have to clean them up afterwards.

 

[slowride]

Nothing as cool as a lot of what's posted here (other than looking for a job). I work for a car manufacturer. I tell dealers how to be profitable and not piss off customers.

 

[DeltaSigBoater]

What type of work are you looking for?

Entry Level - Office work, Customer Service, Sales, Advertising/Marketing, Insurance, Mortgage, Banking.

In all seriousness something with a regular paycheck, and me a little bit of job security!

 

[schiada001]

Getting ready to remove and replace a 6" solid shaft 14' long weighing 1100 lbs. and bearings from Trane air handler. Also it is located two floors below ground level. Just a little rigging needed

 

[Loony Toon]

Cramped quarters but a nice view

WARMC on Silver Creek.
I work for Roel Const. We had an office just down the road at Goldrush. Just relocated to Kingman.
If you have any aerial photo's of the Laughlin Ranch Club House and Spa thats one on my projects in the area.
Bottom photo looks like Five Mile Landing?

 

[whiteworks]

Here's a shot from the conference over at corporate last weekend

 

[schiada001]

Looks like a Porker game , who lost there wallet?:swear

 

[schiada001]

Whiteworks my bad.

 

[RiverDave]

Looks like a Porker game , who lost there wallet?:swear

That was my table, even after my efforts to keep it clean all night.. LOL

I even brought out the big trash cans on wheels and set it next to the table.. LOL

RD

 

[DeltaSigBoater]

That was my table, even after my efforts to keep it clean all night.. LOL

I even brought out the big trash cans on wheels and set it next to the table.. LOL

RD

Funny how that works :beer

 

[Universal Elements]

Entry Level - Office work, Customer Service, Sales, Advertising/Marketing, Insurance, Mortgage, Banking.

In all seriousness something with a regular paycheck, and me a little bit of job security!

Check here for some job openings in Lake Forest. If you are interested PM me with your email address and I will send you a "employment recommendation". Do not fill out the application until I send you the email. In addition to owning my biz, I work with PAC as a PM. The benefits are great and the place is real laid back. We are growing globally at tremendous rates.

https://recruiter.kenexa.com/panaso...303505?command=CCSearchPage&ccid=bupJEdUjsTs=

 

[maxwedge]

Circuit board manufacturing. I can't actually show you picks from inside our plant because a lot of it is proprietary, but basically I program and operate stuff like this I found on you tube.
[video=youtube;9HWRSH_OmDk]http://www.youtube.com/watch?v=9HWRSH_OmDk[/video]

and this
[video=youtube;qPMij0_2RO0]http://www.youtube.com/watch?v=qPMij0_2RO0&feature=related[/video]

Let me also add, that whoever programmed this selective is wasting huge amounts of time with unnecessary movement.

Actually most of our equipment is newer and faster than anything I could find on youtube, but you get the idea.

I also do a bit of construction/remodeling and pizza delivery on the side to pay the rest of the bills.

 

[Racey]

When i'm not flying around the world as a male model i change spark plugs at a boat shop.

 

[spotondl]

Monday Night Football - Pittsburg

Air show in Mesa AZ

LA Marathon

Catalina waterski race

2007 NFL Kickoff studio show

Atlanta Braves Extra game

 

[Ziggy]

Nothing as cool as a lot of what's posted here (other than looking for a job). I work for a car manufacturer. I tell dealers how to be profitable and not piss off customers.

I booted the other Manufacturer I used to sell
Now I'm exclusive.

 

[SuperDave013]

I have a hose and fittings shop for the motorsports folks (or what ever else). What I feel sets me apart from the other guys is I make most of my own fittings. Not only can I do it my way but I have fun giving parts wacky names.

The Busby (after Brian Busby) Nice for jet boats with set back pumps among other things.

The De-Lux line of fittings is coming right along
Holley carb fittings De-Lux (reduced hex so you can fit a wrench on them and a -6AN wrench at that)

1/2" NPT Plug De-Lux (-6AN wrench fits these also)

Here are some -8 X 1"NPT that work real nice in the big offshore coolers (power steering, transmissions). As far as I know I'm the only one making these.

The correct fittings for GM transmissoins (Shocked no one else is making these, pipe threads are not correct!)

DOT brake hoses made any way you want. Lifted trucks and hot rods with mixed and matched parts are not a problem.

whew, thanks for letting me spam.

 

[Cigalert]

Bread bread and a little more bread. That's all I do. No pastries, croissants, muffins or cakes...just bread.

 

[OGShocker]

We manufacture equipment the prevents this from happening..

 

[Tom Brown]

 

[Luckie Stiff]

My lovely place of employ, beautiful Wasco State Prison.

 

[BarryMac]

I do a little work for these guys. My job makes sure that the production equipment can continue to make the worlds greatest Golf Equipment...:thumbsup

 

[Miss Perfect]

My company installs terrazzo flooring. This is a job we recently did for Yan Can Cook.

 

[Chico&Zeus]

Largest shit-plant in the state of AZ!!! Shit rolls downhill and I'm the guy at the bottom of the hill I build both water and waste-water treatment facilities:thumbsup

 

[Kachina26]

This is what I do most days... Finding a job in this economy sucks !!! :swear

What kind of leads do you get off of that site? My wife has been on it for some time and gets mostly crap from BS agencies or leads that are totally unrelated to the type of work she is seeking.