Hallo aus Deurschland, Hello from Germany, Please help identify this boat.

[Snorre]

Ich bin neu hier weil ich mir ein Boot gekauft habe das ich erneuern möchte aber bin mir nicht sicher ob es eine Shiaha 19 Baujahr ???

ist ich benötige noch Informationen von euch Fachkundigen bitte.

 

[Snorre]

Ich habe noch viel Arbeit vor mir , derzeit entferne ich den alten Lack und da kommt ein grüner Flake Lack zum Vorschein .

 

[Snorre]

Ich habe noch viel Arbeit vor mir , derzeit entferne ich den alten Lack und da kommt ein grüner Flake Lack zum Vorschein .

 

[mash on it]

Translation (from Google translate) first post -

"I'm new here because I bought a boat that I want to renew but I'm not sure if it's a Shiaha 19 built???

I still need information from you experts please."

I'm thinking he means Schiada?

Dan'l

 

[Snorre]

Oh jess sorry , Schiada

 

[Snorre]

Hello
We can help idenficat my Boad ?

 

[82daytona]

Is this kinda like when Americans travel and assume everyone speaks English?

 

[Bobby V]

Ich bin neu hier weil ich mir ein Boot gekauft habe das ich erneuern möchte aber bin mir nicht sicher ob es eine Shiaha 19 Baujahr ???

ist ich benötige noch Informationen von euch Fachkundigen bitte.

@Ziggy might be able to translate.

 

[DRYHEAT]

Is this kinda like when Americans travel and assume everyone speaks English?

Du verdammter selbstgefälliger Amerikaner

 

[Ziggy]

@Ziggy might be able to translate.

Very slowly I can.
He's asking if a boat he purchased is a shiaha 19 Baujahr(Build year).
Essentially trying to figure out what kinda of boat it is.
I'm assuming shiada

 

[Ziggy]

@Ziggy might be able to translate.

Lol, maybe I should have read more than just your quote.
Perhaps @RiverDave can identify it.

 

[jetboatperformance]

My first guess would be a Stevens (60's 70') The partition between the gunnels isnt Schiada I dont believe

 

[Romans9]

Well I have no idea what he said but I know one thing for sure, he came to the right place to identify a boat.
I will be very disappointed if in the next 24 hours every detail about this boat’s existence isn’t in this thread……..

 

[Icky]

This would get more visibility in the lounge

 

[Snorre]

Hello, thank you for the information, are you sure it's not a schiada? I have to be completely sure which boat and which year of construction in order to get new papers for it

 

[Snorre]

1 Boad in the Water and the other in the Garage .

 

[Snorre]

1,2,3 Striptease

 

[yz450mm]

Hallo, Sie werden hier bessere Informationen erhalten, wenn Sie Google Translate verwenden und detailliert erklären, was Sie genau haben und was Sie damit machen möchten.

 

[mash on it]

@yz450mm -

Post #4

Seems like he wants to identify this boat?
Thinks it might be a Shiada?

Dan'l

 

[yz450mm]

@yz450mm -

Post #4

Seems like he wants to identify this boat?
Thinks it might be a Shiada?

Dan'l

Yeah, I was just promoting him for any more info that he might have and to put it in English for those that don't know about Google translator.

 

[Wedgy]

Maybe an admin can help Snorre with better placement of the thread, or?
No fear of old boats, that's for sure!

Mach shnell !! Snorre!!

 

[Snorre]

now again Who can help me identify the boat? I don't know exactly what I bought, I'm currently rebuilding this boat, so I need information from you. Thanks Snorre

 

[Icky]

now again Who can help me identify the boat? I don't know exactly what I bought, I'm currently rebuilding this boat, so I need information from you. Thanks Snorre

Try posting your question in the lounge

 

[Chili Palmer]

If it's a Schiada the first thing he needs to do is add 2 more axles on that trailer because as soon as it's been restored it'll never leave that trailer.

 

[OkHallett270]

Great now Grads speaks German!

J/K this seems legit and I have nothing to add for the ID of the boat. I’ll continue to watch from a distance!

 

[coolchange]

I’m going to go with Hallet. Built from a 3 piece mold, the deck is laminated to the top of the hull. And it was green metal flake . Is that a ZF v drive out of a yacht?
Did the gunnels of Mandellas wrap around the transom like that?

 

[4Waters]

His wife has got to be pissed that he drug that home, he will fit in just fine here

 

[lbhsbz]

I'm leaning towards Hallet

 

[Clank123]

It’s a mid-sixties Hallett with a center deck.
I’ve one in the Parker Shop right now. Not a center deck.
It’s a 1966
Also German boat has set plates with turnbuckle pad’s mounted to the hull along with a BeeDee Marine combination rudder support/battery box.
Very standard ski boat setup for those years.
Good luck with the restoration!

 

[Willie B]

…’63ish Hallett that someone has cut a portion of the center deck out of for whatever that mechanical thing is..: 99% sure…
… if you have ethanol gas in Germany, get rid of those Fiberglass fuel tanks in the front seating area…Ethanol will eat up the fiberglass…
… This is my 63 Hallett…

 

[FreeBird236]

This is my old 69 Hallett.

 

[Snorre]

Hello, thanks for the information, I'm a little further along now, and yes, my wife was really happy about this project

 

[Snorre]

My next tasks are to remove the 5 layers of paint and then repaint the boat

 

[Deckin Around]

 

[fat rat]

View attachment 1379625 View attachment 1379626

You beat me to it!
I

 

[Fun Times]

^, Lol, that's the consequences of moving this question down in here.
At least Snorre got his answers.

Try posting your question in the lounge

 

[Snorre]

No Problem

 

[Snorre]

Das ist meine Frau=
This is my wife

 

[Romans9]

Das ist meine Frau=
This is my wife

Wow, you just upped your game here my friend!

You own a badass boat and you just placed a picture of a long range rifle as your “love interest”, let me be the first to invite you to the good ole’ USA…..

That rifle deserves a full size photo…

 

[WYRD]

Das ist meine Frau=
This is my wife

Nice but make sure she's unloaded before having coitus

 

[Mandelon]

Please keep this thread up to date on your progress.

Bitte halten Sie diesen Thread über Ihre Fortschritte auf dem Laufenden.

 

[Snorre]

yes, thank you, unfortunately I was born in the wrong country, I love everything that has V8 engines, I love weapons, but you can only operate all of this in Germany with a lot of restrictions...

yes, I'll keep you updated with my project

 

[Snorre]

Kleaning up the parts ,I would have liked a big block but they are difficult to obtain here

 

[Snorre]

I need a set of small block pistons with +0.40 overeurekisch, does anyone still have a set?

 

[PlumLoco]

Looks like it is going to need a new lifter.

 

[4Waters]

Kleaning up the parts ,I would have liked a big block but they are difficult to obtain here

You should probably switch to a hydraulic roller camshaft as well, it's hard to find a quality set of flat tappet lifters anymore.

 

[Clank123]

Sure like to see you switch to a period correct scoop.
This one is 149.00 from Speedway motors.
Paint to match the hull.
Oh, and no need to paint the engine Chevy Orange. A nice gloss black would look correct with the original hull color.

 

[Snorre]

Würde mich freuen, wenn Sie auf eine zeitgemäße Schaufel umsteigen würden.
Dieses hier kostet 149,00 von Speedway Motors.
Farbe passend zum Rumpf.
Oh, und der Motor muss nicht in Chevy-Orange lackiert werden. Ein schönes glänzendes Schwarz würde zur Originalrumpffarbe passen. View attachment 1379875 View attachment 1379876

Der Motor war beim Kauf rot, der Lack blättert ab, aber vorher wird er zerlegt und bekommt ein neues Loch auf 040 Übergröße

 

[Snorre]

The engine was red where I bought it, the paint is coming off, but first it is dismantled and gets a new hole on 040 oversize

 

[4Waters]

The engine was red where I bought it, the paint is coming off, but first it is dismantled and gets a new hole on 040 oversize

Am I missing where the current pistons are marked .030?