Fabricator/TIG Welder near San Dimas

[rivergames]

My Coworker needs a stainless table frame made for his new remodeled home.

He Needs the feet, legs, & frame fab's and welded up using a 14 or 16 gauge stainless.

Anyone have any recommeded Fabricators/Welders around LA/IE?

 

[Bobby V]

@H20 Toie Here you go.

 

[monkeyswrench]

@Fabhouse , you know anyone in the area? Bobby over at Walden Speed shop in Pomona, but he's the only guy in the area I know out that way.

 

[NicPaus]

Would about @cj222 ?

 

[wings_of_eagles]

@Nick Valore
Madskillz Fab 626/786-7779

 

[Fabhouse]

@monkeyswrench Not aware of someone in the area I would recommend. To be built correctly you will need a large fixture plate with uprights.

 

[evantwheeler]

@monkeyswrench Not aware of someone in the area I would recommend. To be built correctly you will need a large fixture plate with uprights.

This. Stainless is a real hooker, it moves a ton when you weld it.

@rivergames I wouldn't be surprised if this ends up being a $5k+ table base

The orange and pink square/rectangle shapes are carbon steel?

 

[Fabhouse]

This. Stainless is a real hooker, it moves a ton when you weld it.

@rivergames I wouldn't be surprised if this ends up being a $5k+ table base

The orange and pink square/rectangle shapes are carbon steel?

My initial thought was 5k plus. It looks far more simple than it is. I would assume the mild steel frame with SS legs is to save on material cost.

 

[rivergames]

Would about @cj222 ?

Nick is super busy with trailers right now!

 

[rivergames]

This. Stainless is a real hooker, it moves a ton when you weld it.

@rivergames I wouldn't be surprised if this ends up being a $5k+ table base

The orange and pink square/rectangle shapes are carbon steel?

The Blue is 2"x2" cross members with a 1"x2" Frame.

My initial thought was 5k plus. It looks far more simple than it is. I would assume the mild steel frame with SS legs is to save on material cost.

I thought he wanted all SS. Just using the difference colors to show which ones are 1"x2" and the others are 2"x2"

 

[evantwheeler]

The Blue is 2"x2" cross members with a 1"x2" Frame.


I thought he wanted all SS. Just using the difference colors to show which ones are 1"x2" and the others are 2"x2"

It is explicit calling out stainless steel for the round legs, but just calls out steel for the tabletop frame. Its not an issue welding carbon to stainless, and he'd save a bunch of money building it with the dis-similar metals, might want him to clarify that.

This is something we could build, but not for a while due to current obligations with contract work in the field, and it wouldn't be cheap unfortunately. I'm sure there are some one man shops around that can handle something like this without the overhead that we have as a union shop.

 

[Deckin Around]

Cheaper if you have an iron railing/gate guy build it out of mild steel and have it powder coated or hydra dipped to look stainless

 

[rivergames]

Thanks you for the info guys! I will relay the message!

 

[ChrisV]

When you need this done? What grade stainless?

 

[clark]

My Coworker needs a stainless table frame made for his new remodeled home.

He Needs the feet, legs, & frame fab's and welded up using a 14 or 16 gauge stainless.

Anyone have any recommeded Fabricators/Welders around LA/IE?

View attachment 1481049

Micro-Tig 748 E. Edna place, Covina 91723--(626)3397017--His work is truly exceptional and reasonable

 

[The REAL Prop Duster 281]

My Coworker needs a stainless table frame made for his new remodeled home.

He Needs the feet, legs, & frame fab's and welded up using a 14 or 16 gauge stainless.

Anyone have any recommeded Fabricators/Welders around LA/IE?

View attachment 1481049

Give Jimmy Mobley a call!

 

[82daytona]

@4Waters

 

[4Waters]

@4Waters

I don't know how to or have a TIG welder

 

[RitcheyRch]

What about @Travmon

Not really sure where he lives but he has the skills to do it.

 

[82daytona]

I don't know how to or have a TIG welder

I just wanted to let you know there was a thread you missed.

 

[4Waters]

I just wanted to let you know there was a thread you missed.

I didn't miss it

 

[RIVERBORN]

I’m in Bakersfield. We could handle it if need be. Depending on time frame
Regularly go down to Pasadena and Temecula for movie theater work right now.
I am a small fab shop. Welding and structural steel contractor

 

[elco]

Mark at weld creations is in San Dimas off of Gladstone. He should be able to help.

Weld Creations | Precision TIG Welding | Glendora, Los Angeles

weldcreations.com