WELCOME TO RIVER DAVES PLACE

DCB M42 in the water

Spitfire

Well-Known Member
Joined
May 4, 2016
Messages
120
Reaction score
132
That is a sexy boat. Question, I thought outboards needed to be broke in? Are used ones put on to test?
 

Dog

Well-Known Member
Joined
Jun 18, 2008
Messages
1,545
Reaction score
4,655
I'm pretty sure he was asking about the name of the boat, unless of course you were telling him the name of the boat 🤔
I was being a smart ass... as I thought they were. If not take my post as you want. lol
 

HydroSkreamin

StressEliminator
Joined
Jan 12, 2014
Messages
2,129
Reaction score
5,802
IMG_7350.jpeg
IMG_3295.jpeg


Day 2, and we haven’t burned a half tank of fuel yet.

This is the real deal boys…and there’s a whopping 3.3 hours on the engines. We’re not done yet!
 

attitude

Well-Known Member
Joined
Jul 30, 2009
Messages
4,125
Reaction score
7,455

Tony DCB Boats

Well-Known Member
Joined
Feb 19, 2019
Messages
791
Reaction score
4,660
Damn that’s moving, and it’s on a lake so no complaints about currents or tides.

What’s the fastest a M37 has ran?
M-37 with 500's has run 133 with a set of 36's and the 42 hit 132 yesterday with a set of 36's as well. We are still dialing it in and definitely going the right way. Super exciting and it is a beast. The lake was very flat and sticky as well. All of us at DCB have been on the gas and the hard work is paying off.

Happy Friday y'all.
-Tony
 

Teague_JR

Well-Known Member
Joined
Jun 7, 2018
Messages
281
Reaction score
836
We want it to work everywhere and the speed will come if it is set-up correctly. We are on the right track.

Like Tony says, dialing in is about a lot more than the big hero number. We will generally use the top speed with each pitch of propeller as a comparative efficiency study. However, we want the boat to have the best manners from idle to top speed with a variety of weight loads in a variety of conditions.

For an all new model and bottom design, we have gotten very close to that very quickly, in my opinion. But we aren’t done yet.

JT
 

steamin rice

No Bad Days....
Joined
Dec 20, 2007
Messages
4,017
Reaction score
2,462
Like Tony says, dialing in is about a lot more than the big hero number. We will generally use the top speed with each pitch of propeller as a comparative efficiency study. However, we want the boat to have the best manners from idle to top speed with a variety of weight loads in a variety of conditions.

For an all new model and bottom design, we have gotten very close to that very quickly, in my opinion. But we aren’t done yet.

JT
Awesome! Congrats to the whole team!
 

FROGMAN524

Well-Known Member
Joined
Mar 16, 2013
Messages
5,799
Reaction score
10,690
Like Tony says, dialing in is about a lot more than the big hero number. We will generally use the top speed with each pitch of propeller as a comparative efficiency study. However, we want the boat to have the best manners from idle to top speed with a variety of weight loads in a variety of conditions.

For an all new model and bottom design, we have gotten very close to that very quickly, in my opinion. But we aren’t done yet.

JT
Will testing in December vs July make a big difference in that prop selection? Weight being the same.
 

RiverDave

In it to win it
Joined
Sep 13, 2007
Messages
126,355
Reaction score
164,923
View attachment 1457112 View attachment 1457113

Day 2, and we haven’t burned a half tank of fuel yet.

This is the real deal boys…and there’s a whopping 3.3 hours on the engines. We’re not done yet!

Do the 500’s have a period of time before they “release” like some of the other models? Or are they ready to run full out right out of the gate?

132 is moving!!! I absolutely love the boat and can’t wait to see it in person and go over it!

RD
 

Spitfire

Well-Known Member
Joined
May 4, 2016
Messages
120
Reaction score
132
Response below from Teague JR from earlier

Not in the modern era. They are heat cycled and broken in at Mercury. We warm them up then run them hard right out of the crates.
 

HydroSkreamin

StressEliminator
Joined
Jan 12, 2014
Messages
2,129
Reaction score
5,802
Do the 500’s have a period of time before they “release” like some of the other models? Or are they ready to run full out right out of the gate?

132 is moving!!! I absolutely love the boat and can’t wait to see it in person and go over it!

RD
As Teague said, they're pretty much ready to go out of the box, but in my previous life running this stuff on the dyno you'd see them have the rings fully seated and everything rock n roll after about 10 hours, and we're talking 5 HP or less.

Can't wait for you to experience it. On plane with no bowrise, staying on plane at 18 mph, 90 feels like 60, etc. Very graceful, does not hint at being a large boat except in waves. We haven't had it in huge water yet but we're definitely looking forward to it! Takes normal lake whitecaps like they're not there.

Keep an eye out for it in your neighborhood next week...;)
 
Top