Current Situation - a picture thread

[24 Sleekenforcer]

 

[HBCraig]

Prom for my boy.

 

[Sleek-Jet]

Gotta love the Beechcraft engineering.
less than 4 second gear swing..


View attachment 1111690

The old 12 volt airplanes take about twice as long... LOL...

 

[coz]

Hanging with my son and his family.

 

[River Dirt 2]

 

[Crazyhippy]

Finishing up exterior lights, and getting some smoke rolling...

 

[coz]

We reached a milestone today, no more training wheels.

 

[2Driver]

Blowing up river like crazy. Not sure these rafts were getting anywhere

 

[4Waters]

Blowing up river like crazy. Not sure these rafts were getting anywhere

View attachment 1111913

"Just a 3hr tour" comes to mind. LOL

 

[grumpy88]

Finishing up exterior lights, and getting some smoke rolling...
View attachment 1111884 View attachment 1111885 View attachment 1111886 View attachment 1111889 View attachment 1111890 View attachment 1111891 View attachment 1111892 View attachment 1111893 View attachment 1111894

Amazing ! Where is heaven ?

 

[Crazyhippy]

Amazing ! Where is heaven ?

Lake Norman, NC.

 

[grumpy88]

Lake Norman, NC.
View attachment 1111941 View attachment 1111942 View attachment 1111943 View attachment 1111944 View attachment 1111945 View attachment 1111946 View attachment 1111947 View attachment 1111948 View attachment 1111949 View attachment 1111950 View attachment 1111951 View attachment 1111952 View attachment 1111953 View attachment 1111954 View attachment 1111955 View attachment 1111956 View attachment 1111957 View attachment 1111958 View attachment 1111959 View attachment 1111960 View attachment 1111961 View attachment 1111962

Amazing ! Congratulations

 

[SCV2RVR]

Great weekend of day drinking in Santa Clarita. Pocock, Telco brewing and finishing of with lunch at Schooners. Some can’t hang! Haha

 

[2Driver]

Party in the old barn behind the Parry lodge in Kanab

 

[SKIDMARC]

 

[jeepdog]

Maiden voyage on my buddies HTM at lake Mohave....lots of fun....fast

 

[BUDMAN]

Had brunch at the Shoreline Yacht Club then took a little booze cruise on a friends boat. Great Sunday Funday!

 

[2Driver]

Find the Jeep in pic 1

 

[79 HUSTLER]

Lake Norman, NC.

Looks amazing. A family member just bought a waterfront home there and it has me looking to relocate there.

 

[Dan Lorenze]

Last night at The Golden Tiki in Vegas.. Such a cool spot

 

[HNL2LHC]

Workday on Kauai today…..

 

[2Driver]

 

[FCT]

Sitting on-site tonight in beautiful Bakersfield waiting for the machine to finish working. Thanks for RDP to pass some time!

 

[SoCalDave]

Drilling some new holes.

 

[rivrrts429]

Sitting on-site tonight in beautiful Bakersfield waiting for the machine to finish working. Thanks for RDP to pass some time!

Those Magni’s are super versatile and crazy expensive machines

 

[FCT]

Those Magni’s are super versatile and crazy expensive machines

Yeah they are cool but I like the old ones that were easy to operate and you didn’t need to have a college degree in computers to figure out how to run it

 

[HNL2LHC]

Drilling some new holes.

View attachment 1113132

Interesting Dave. So when you update or retool equiptment you just create new anchor points in the fixture? Do you give tours of your facility? I works with several different types of manufacturers and it always fascinates me to see facilities and educational.

 

[DWC]

Quick stop in Coeur d’Alene. What a beautiful place

Ziggy pic

 

[SoCalDave]

Interesting Dave. So when you update or retool equiptment you just create new anchor points in the fixture? Do you give tours of your facility? I works with several different types of manufacturers and it always fascinates me to see facilities and educational.

Well on this project it was a matter of having a 1970's mold that always ran in a 70's machine that finally died on us.
So to make the old tool to fit in a newer machine the simplest and most cost efficient option was to drill new ejector rod holes in the mounting platens.
Mag drill + center drill bit + 5/16 x 18" bit + 17/32 x 18" bit + 1 1/8 x 6" bit + about 4 hours for set-up and labor and it's ready for the tool to be set.

Your more than welcome to stop by anytime, I've had a hand full on inmates stop by for a tour, just give me a call before you come by.
Dave Marlow / 562-405-2646

 

[HNL2LHC]

Well on this project it was a matter of having a 1970's mold that always ran in a 70's machine that finally died on us.
So to make the old tool to fit in a newer machine the simplest and most cost efficient option was to drill new ejector rod holes in the mounting platens.
Mag drill + center drill bit + 5/16 x 18" bit + 17/32 x 18" bit + 1 1/8 x 6" bit + about 4 hours for set-up and labor and it's ready for the tool to be set.

Your more than welcome to stop by anytime, I've had a hand full on inmates stop by for a tour, just give me a call before you come by.
Dave Marlow / 562-405-2646

Thanks for the offer Dave. I put your number in my phone and reach out to you on the next time I am in the area.

 

[HBCraig]

Sitting on-site tonight in beautiful Bakersfield waiting for the machine to finish working. Thanks for RDP to pass some time!

Very cool. Who do you work for?

 

[Echo Lodge]

Happy Cinco De Mayo

 

[SoCalDave]

Find the Jeep in pic 1

View attachment 1112413 View attachment 1112414 View attachment 1112415 View attachment 1112416 View attachment 1112417

Where is this at?

 

[2Driver]

Barracks trail. R

Where is this at?

runs from Kanab ( pink coral dunes) to Carmel Junction UT. 20ish miles off road 20 creek crossings. Only do it south to North lol.

 

[cofooter]

Beautiful Spring Day in Colorado. Nice little May storm earlier this week in the high country. In the background, Longs Peak, a Colorado 14'er and Mount Meeker, a 13'er. Better know as the "Twin Peaks"!

 

[2Driver]

 

[HNL2LHC]

View attachment 1113331

We were there a months ago. Unbelievable surroundings all around you!!!!

 

[FCT]

Very cool. Who do you work for?

I’m a owner operator and have another Landoll as well that another O/O pulls for me full time. I work for several companies but that happened to be for West Coast Equipment and a telecommunications company. I work for ARB/PSC probably 75% of the time.

 

[HBCraig]

I’m a owner operator and have another Landoll as well that another O/O pulls for me full time. I work for several companies but that happened to be for West Coast Equipment and a telecommunications company. I work for ARB/PSC probably 75% of the time.

Very nice
ARB is big.

PM your contact stuff. I have to source heavy haul from Port Hueneme all the time to haul my cranes. We don't own a single truck. A small crawler takes 3 9-axles and about 12 to 15 falloff loads.

 

[HNL2LHC]

End of a busy week in the islands. Finished up in Waikiki…..

 

[RVR2SNO]

Daughter’s 9th Birthday and she wanted to go to Disneyland! The people watching is off the charts.

 

[BUDMAN]

Pool day with the granddaughter

 

[Dan Lorenze]

Breakfast in Barstow

 

[DaytonaBabe]

Happy Happy doggo! The pool reached 80 degrees today. Hooray!

 

[nameisbond]

Bought used wheels for the new to me Mercedes. Seller paid $3,500 and sold them for $500. I'll put them on if its not raining tomorrow.

 

[SOCALCRICKETT]

Had to run out to the havasu house to fix a water leak. Took "meatball" with me, he never misses a chance to run out here with me. He hears "havasu" and runs to the truck!

 

[HBCraig]

Got some new kicks on the rig thanks to @LakeMead Boater

 

[4Waters]

First driving lesson, and yes it's got 3 pedals

She did pretty good

 

[rivrrts429]

View attachment 1113553



Happy Happy doggo! The pool reached 80 degrees today. Hooray!

At least the pool is finally done lol Seemed like a crazy long build.

 

[SOCALCRICKETT]

Just got back from the ramp, my son wanted to see the boats...




Jesus this kid is a chip off the old block