Adding my personal touch "21 Daytona"

[Outlaw]

Thanks Barry

one on the water

 

[Gelcoater]

Thanks Barry

one on the water

Looks killer:thumbsupIs it just me?Or is that expanse of white between the flames and checkers just screaming for a large Breadfan sticker?

 

[Outlaw]

Looks killer:thumbsupIs it just me?Or is that expanse of white between the flames and checkers just screaming for a large Breadfan sticker?

now you know why I added the checkers

 

[Outlaw]

here's some pics from the power tour, luckily somebody else took some pics thanks DC and Ryan:thumbsup

 

[Outlaw]

update.....
adjusted the tensioner for the blower belt and set the rev limiter to 6K.

now running 10psi boost @6k rpm, boat was airing out really nice

had to be running at least 60 . next time out I'm raising the limiter to 63K

still fat at WOT

 

[Gelcoater]

Soooo,how long did it take to clean?

 

[Marko]

Wow, nice job Outlaw!!!! It's a work of art for sure and as said before, YOU ARE A POLISHING MOFO! :thumbsup:thumbsup

 

[Outlaw]

Bump for miss B

Sent from my iPhone

 

[Gelcoater]

Outlaw,any updates or upgrades? What kind of #s are you seeing?

 

[MissB]

Bump for miss B

Sent from my iPhone

I don't know what to say.. That boat is so pretty. You did an amazing job. I hope to see it on the water on day. Thank you so much for sharing. Your talent and drive shine brighter than that engine. Amazing.
:thumbsup:thumbsup

XOXO
MissB

 

[Outlaw]

Outlaw,any updates or upgrades? What kind of #s are you seeing?

Well I had a little problem with my intake valves
When I removed the rockers for winter I noticed the tip of the intake valves were worn where the roller tip
Touched
I pulled the engine and removed the heads, I sent the valves back to the
Manufacturer to see what happened

Well there was an isolated defect
So the supplier is paying to have
New valves installed and sending
Me new gaskets

I'm also adding a oil cooler
I wanted to run without one to see
If it needed one
I determined it needs it when I run it very hard the oil temp climbs up pretty fast

Thanks to Chris Straub for stepping up and making things right on the valve problem



Sent from my iPhone

 

[Outlaw]

I don't know what to say.. That boat is so pretty. You did an amazing job. I hope to see it on the water on day. Thank you so much for sharing. Your talent and drive shine brighter than that engine. Amazing.
:thumbsup:thumbsup

XOXO
MissB

Thank you


Sent from my iPhone

 

[Outlaw]

Wow, nice job Outlaw!!!! It's a work of art for sure and as said before, YOU ARE A POLISHING MOFO! :thumbsup:thumbsup

Thanks Marko, it will be getting some clear coating on the polished pieces
in the future

 

[charlyox]

Now that's a "custom boat"! Great job.:thumbsup

 

[jrork]

Now that this work of art is done, whatcha gonna do next Paul?

 

[Outlaw]

Now that this work of art is done, whatcha gonna do next Paul?

Drive the crap out of it. Lol. That
And catch up on the last 3 years of my life
How was Mardon?


Sent from my iPhone

 

[miniboatfan]

What an amazing job you did! I had a few minutes to read, and ended up reading the entire thread. You have a gift when it comes to detail...thanks for sharing it.

By the way, I have a 1982 13' Daytona - It's a semi V with a transom stand-off plate for an outboard. Does anyone know what, if anything, it was called?
Daytona - ?

Dave - Miniboatfan

 

[jrork]

Drive the crap out of it. Lol. That
How was Mardon?

Paul, it was fantastic. The iron was over the top and a great time. Hope to do ti again soon when our 21 is done. I'll send you some pictures....

 

[NIGHTMARE]

Just stumbled across this thread, and I just spent the last three hours of my life drooling all over myself and taking notes for my 19' Daytona rebuild.
ABSOLUTELY GREAT WORK:bowdown: Anyone who has not seen this thread, definitely should.:thumbsup:thumbsup

 

[Outlaw]

TTT for Aaron here's the thread


Sent from my iPhone

 

[Carlson]

TTT for Aaron here's the thread


Sent from my iPhone

Thanks!

 

[jrork]

Okay Sweetpea............let's see some updates on whatcha up too. We all know you can't leave something alone.

 

[Gone_Flat]

awesome build ,now enjoy !!!!TUNNEL T

 

[rivermobster]

Well this thread sure made my cup of coffee this morning so much more enjoyable. Thank you!! :thumbsup

What an absolute work of art. :bowdown:

 

[Gelcoater]

Outlaw? Anything new going on?

 

[Outlaw]

Outlaw? Anything new going on?

Hey Gelcoater, hanging in there.
How about yourself?

 

[Gelcoater]

Hey Gelcoater, hanging in there.
How about yourself?

Also hanging in there.
How's the boat running?Any new tweaks?
And how's "the Duck"?

 

[Warlock1]

Hey Outlaw, Can you describe the plumbing you did for the water. I'm new to jets and mine has the "household" water fittings which I think simply looks bad and I want to change it over to a more professional look. Sizing of the lines, make of the fittings and any other little hints or tips would be greatly appreciated.

 

[Outlaw]

Sorry Warlock1 not on here very often lately
PM me your email and I'll gather all that info for you

I used .500 stainless hard line and swagelok fittings
I just rolled 80 hrs run time and the lines are still perfect