10' Mini Schiada Build

[rivergames]

Well.... Probably time to get the build thread going.

Purchased the boat last week out in Beaumont, CA.

Dropped the boat off at my buddies shop this past Tuesday evening.

He's already tearing her down.

 

[RitcheyRch]

Looking forward to following the process.

 

[rivergames]

Unfortunately, the non skid probably can't be saved. There was a flat recess for the jet in the back that will be filled. The whole keel will be beefed up and balsa floor will be added with new stringers. I am having him throw another layer of glass on the floor to beef it up since it is pretty damn thin.

Boat will be capped and the well in the back will be filled flat.

 

[rivergames]

Does anyone know the history on this boat? The guy I bought it off of said that he got the boat out of Signal Hill.

 

[rivergames]

And if anyone is interested, this was my 1st Mini Schiada build that I finished back in 2015.

The Dime Piece

On Sat I went to Islander Marine to check out this Mini 10'r. This is the Mini that was for sale on the craigs list in Fresno last year. Thank you to Vegas Dave for the offer to buy this mini. This mini is in desperate need of work. The floor in the boat needs to be ripped out and the bottom...

www.riverdavesplace.com

Boat has ran great over the years, but something is locking up in the outboard. Luckily I have another Tohatsu 40HP that is sitting in my garage that I can throw on her.

 

[Kachina26]

Looking forward to watching the build. I love watching other people spend money.

 

[rivergames]

Looking forward to watching the build. I love watching other people spend money.

I got 3 F'n mini boats I need to get rigging for. I might need to stand on a corner a couple nights a week to support this addiction

 

[lakemadness]

It looks like it got run hard in Beaumont

 

[whiteworks]

I got 3 F'n mini boats I need to get rigging for. I might need to stand on a corner a couple nights a week to support this addiction

The Daytona is gonna outrun them all

 

[rivergames]

The Daytona is gonna outrun them all

12' Daytona going to outrun a 12' Daytona?

My boy and I loaded up the other 12' Daytona last night to drop off to the glass/gel shop next week

 

[whiteworks]

12' Daytona going to outrun a 12' Daytona?

My boy and I loaded up the other 12' Daytona last night to drop off to the glass/gel shop next week

View attachment 1450504

So it’s two Daytonas and one schiada? I was thinking two shiadas and one Daytona

 

[coolchange]

Why does this stuff always seem to find its way to Beaumont?

 

[rivergames]

So it’s two Daytonas and one schiada? I was thinking two shiadas and one Daytona

I have 1 Schiada that was rebuilt back in 2015.

I have your old 12' Daytona that just got the gel/glass done. Now time to rig.

I have the other 12' Daytona that I picked up a few miles from my pad in Ladera Heights. That is currently in my race trailer and will be dropped off in a few days.

Then last week, I was the (un)lucky summa bitch that was 1st to send the previous owner a message and we striked a deal. As much as I don't really feel like rigging 3 more minis, it's going to be awesome when they are done..

I might try to land a couple triple axle jet ski trailers and convert them to 2) Schiadas on 1 trailer and 2) Daytonas on the other. Then sell the 4 trailers that are under the boats now.

 

[DarkHorseRacing]

When you say Daytona I'm thinking Eliminator tunnel hull. Which Daytona do you have?

 

[cofooter]

I have 1 Schiada that was rebuilt back in 2015.

I have your old 12' Daytona that just got the gel/glass done. Now time to rig.

I have the other 12' Daytona that I picked up a few miles from my pad in Ladera Heights. That is currently in my race trailer and will be dropped off in a few days.

Then last week, I was the (un)lucky summa bitch that was 1st to send the previous owner a message and we striked a deal. As much as I don't really feel like rigging 3 more minis, it's going to be awesome when they are done..

I might try to land a couple triple axle jet ski trailers and convert them to 2) Schiadas on 1 trailer and 2) Daytonas on the other. Then sell the 4 trailers that are under the boats now.

You can start your own mini boat division in the Enduro!!!!

 

[SOCALCRICKETT]

You need to buy Dave's 16 Daytona that Saleen re gelled

 

[WAAZ]

Learn it - know it - live it!

 

[HST4ME]

Learn it - know it - live it! View attachment 1450524

Yessir! Stinger/Hustler would be a blast on one of those. Hopefully things work out and I can build a few of them soon.

 

[rivergames]

Learn it - know it - live it! View attachment 1450524

At 320 lbs, that might be a little too much weight compared to the 140lb Tohatsu M40C 40HP I'll throw on her.

 

[rivergames]

Filled

 

[HST4ME]

At 320 lbs, that might be a little too much weight compared to the 140lb Tohatsu M40C 40HP I'll throw on her.

they weigh 195 ish pounds, a yamaha 50 clamp is a direct bolt on to get you 3 ram trim. Build a 56 ci block with sst 60 sleeves and you have a little ripper.

 

[rivergames]

they weigh 195 ish pounds, a yamaha 50 clamp is a direct bolt on to get you 3 ram trim. Build a 56 ci block with sst 60 sleeves and you have a little ripper.
View attachment 1451138

195lbs isn't bad. I must have read something differently when I was looking at the weight last week!

 

[rivergames]

More work done. New Keel in!

 

[coolchange]

No delta pad since you were in there?
Maybe a flat keel,HST4ME?

 

[HST4ME]

That can all be done outside.

 

[rivergames]

I'm keeping her as a strait V. That is how my red 10'r is setup and it rides great.

 

[bonesfab]

I got 3 F'n mini boats I need to get rigging for. I might need to stand on a corner a couple nights a week to support this addiction

They say it's not an addiction unless you are sucking dick for it...

 

[rivergames]

Shits Gittin Done! Most of the deck will be finished tomorrow. Hopefully he can save the Non Skid.

 

[rivergames]

 

[skifaster]

This is looking great and can't believe how quick you already got things going. Is this at Stu's shop in Norco that is doing all the work?

 

[rivergames]

This is looking great and can't believe how quick you already got things going. Is this at Stu's shop in Norco that is doing all the work?

Yes Sir!

 

[SLT Kota]

Games, you sir have a boating problem. I am here to enable it, encourage it, and support your boating problem as much as I can.

When do you start selling team merch?

 

[rivergames]

Games, you sir have a boating problem. I am here to enable it, encourage it, and support your boating problem as much as I can.

When do you start selling team merch?

My wallet wishes that I'd rather be addicted to drugs. But in the long run, my son and daughter are going to fricken love their Mini Daytonas. Plus, If one of my mini Schiadas break, I'll have a spare ready to rip

Gotta Come down to the boat races when we race and we bring our GBR shirts and hats

 

[dan34]

So cool

 

[rivergames]

 

[rivergames]

And then my boy Stu says I need a color ASAP..... I'm thinking Oh Shit what the hell do I want?????

So I send him pics of my 21 and say LETS MATCH!!!!

 

[skifaster]

And then my boy Stu says I need a color ASAP..... I'm thinking Oh Shit what the hell do I want?????

So I send him pics of my 21 and say LETS MATCH!!!!

View attachment 1452771 View attachment 1452772 View attachment 1452774 View attachment 1452775

Great call on making them match. That has always been my dream since my Dad got his 21 in 1984. Going to look awesome. And my son is mad at me that you got this one first when it was listed. Congrats!