Who can tell me what these brackets/connectors/??? are called?

[scouter]

I need to find something similar to this for a project I am doing on my dock cover.

The bracket is basically 2 half circles that bolt together on both sides.

I've looked under "clam fittings", "clamp fittings", and a myriad of other search strings in Google and cannot seem to come up with the correct term.

TIA

 

[STV_Keith]

Search for "roll bar mount".

 

[boat527]

Now that ^^^^ was funny.. because I read and thought " roll bar boat"..

Try a 2 piece clamp collar..Roll cage mount or collar.. it looks big... good luck

https://www.google.com/search?q=2+p...d=0ahUKEwjb_puD043QAhVizFQKHYi6DnQQ_AUI1QEoAQ

 

[McRib]

https://www.sxsperformance.com/tube...ping&201=178&gclid=CLn7wOzVjdACFVBcfgod_3cAFg

 

[Captain Dan]

I need to find something similar to this for a project I am doing on my dock cover.

The bracket is basically 2 half circles that bolt together on both sides.

I've looked under "clam fittings", "clamp fittings", and a myriad of other search strings in Google and cannot seem to come up with the correct term.

TIA

View attachment 520341

Google Tube Clamps under Images - you'll see many

 

[twocents]

If you are coming to the Sand-Water-RV Expo at Lake Havasu State Park on November 19-20 you'll probably find a lot of this kind of stuff. In fact, the SXS Performance semi truck and trailer rolling store will be at the Expo -- they will probably have these parts and a few thousand others on sale.

 

[Chili Palmer]

I've always known those parts as "pienches chingaderas".

 

[Roger 1]

Shaft clamps

 

[scouter]

Appreciate all the replies. To clarify, this is not for my Razor. I need a clamp for a tarp extention that I am doing on my dock cover. I am looking for something like this, but in 2 3/8 inch inside diameter:

 

[fmo24]

Have checked McMaster Carr ?

 

[SoCalDave]

Have checked McMaster Carr ?

^This

See if any of this would work for you.



https://www.mcmaster.com/#standard-slip-on-structural-framing/=14w6gtj

 

[scouter]

Found something that I think will work with a little fab work:

 

[KMH]

SK Fencing In Yuma Stock all that pipe clamps

 

[scouter]

SK Fencing In Yuma Stock all that pipe clamps

Well that's who I got the rest of the fittings and pipe from, but they don't have any 2 3/8ths.....

But I'm covered now....

 

[RiverDave]

If you can't get it figured out i can make them.. be a little pricey compared to store bought though

 

[HitIt]

How wide do you need? What material? Do they need to be 2 piece?

Here is a 3/4" wide carbon steel 2 piece unit:

https://www.mcmaster.com/#6436k79/=14warfb

They have a lot of other materials.

 

[teded]

Speed rail

 

[Spudsbud]

great product. Ive installed miles and.miles of catwalk railing using 1 1/2 speedrail.

 

[scouter]

Finally got to wrap this project up yesterday. I had planned on doing it on Saturday, but it was crazy windy here. Yesterday was perfect, so we completed the tarp extension.

I picked up some roll bar boat mounts on eBay that were the correct diameter. I fabricated a bracket to mount to the opposite side for the pivot to mount to and then was good to go. Now our entire pontoon boat will be in the shade in the middle of the summer and not getting baked by the sun.

 

[Waterjunky]

Nu-Rail fittings

I use them all the time on my stations.

 

[paradise]

Finally got to wrap this project up yesterday. I had planned on doing it on Saturday, but it was crazy windy here. Yesterday was perfect, so we completed the tarp extension.

I picked up some roll bar boat mounts on eBay that were the correct diameter. I fabricated a bracket to mount to the opposite side for the pivot to mount to and then was good to go. Now our entire pontoon boat will be in the shade in the middle of the summer and not getting baked by the sun.

View attachment 525478

View attachment 525479

View attachment 525480

Turned out nice :thumbsup