Where to get stainless fenders?

[ChrisV]

As the title stated.

Where could i get stainless fenders for an tripple axle? Is it still backordered?


thank you.

 

[hallett21]

@ONE-A-DAY had someone he used routinely

 

[ONE-A-DAY]

@ONE-A-DAY had someone he used routinely

That place is long gone, they are very hard to get these days, and if you can, they are priced according

 

[sonicss31]

And the transformation begins.

 

[02HoWaRd26]

@Dcb.blake has a source in central Ca

 

[Backlash]

That boat on a triple axle trailer is going to look AMAZING!!!

 

[Boat211]

@Gone_Flat What was the name of that place? In Fresno if I recall.

 

[ChrisV]

That boat on a triple axle trailer is going to look AMAZING!!!

Yeeee hopefully. Kinda wanna go a little more crazy with the lights this time.

 

[Dcb.blake]

@Gone_Flat What was the name of that place? In Fresno if I recall.

It’s now called dexter I think. Just call them with measurements and they can make them. If it’s common enough they might have some in stock.

 

[Dcb.blake]

I guess I should of clarified, dexter in Fresno Ca. Used to be a different name but they got bought out. Still making fenders as of a couple months ago

 

[ChrisV]

I guess I should have clarified, dexter in Fresno Ca. Used to be a different name but they got bought out. Still making fenders as of a couple months ago

Thank you!

 

[Gone_Flat]

Thank you!

Hey fellas the company name is rockwell america they took over fenders n mores bizz . They are in fresno .

 

[ChrisV]

Hey fellas the company name is rockwell america they took over fenders n mores bizz . They are in fresno .

Thanks dude!

 

[shunter2005]

Hey fellas the company name is rockwell america they took over fenders n mores bizz . They are in fresno .

Are they making fenders there in Ca? I'd heard they packed up and sent everything to North Texas and are making the fenders there.

 

[warpt71]

Heres what I was able to find

Home | Dexter Group

Comprehensive line of customer trailer fenders.

www.dexteraxle.com

 

[shunter2005]

According to the Dexter page, it appears that most of the fenders are now made in Azle, TX at the Rockwell/Dexter plant. Fresno does have a manufacturing plant but unknown if they make the fenders there or have them shipped in.

Their catalog does not list any SS fenders. Probably have to call to see if they actually can make them.

https://www.dexteraxle.com/user_area/content_media/raw/RockwellLightandMediumFenderBrochure(1).pdf

 

[Gone_Flat]

According to the Dexter page, it appears that most of the fenders are now made in Azle, TX at the Rockwell/Dexter plant. Fresno does have a manufacturing plant but unknown if they make the fenders there or have them shipped in.

Their catalog does not list any SS fenders. Probably have to call to see if they actually can make them.

https://www.dexteraxle.com/user_area/content_media/raw/RockwellLightandMediumFenderBrochure(1).pdf

Im gonna say they gave them shipped per my experience . I bought two sets last yr

 

[JBZ]

According to the Dexter page, it appears that most of the fenders are now made in Azle, TX at the Rockwell/Dexter plant. Fresno does have a manufacturing plant but unknown if they make the fenders there or have them shipped in.

Their catalog does not list any SS fenders. Probably have to call to see if they actually can make them.

https://www.dexteraxle.com/user_area/content_media/raw/RockwellLightandMediumFenderBrochure(1).pdf

From there catalog
Tandem
New Additions to the tandem Fender line include 16 gauge stainless steel as well as the Rolled Beaded Edge options. Select sizes of triple front fenders are available on request. 1202-SS-SMO 25.00” 96.00” 13.50” 106.00” Smooth 16 Ga. SS 1202-SS-2RBE 25.00” 96.00” 13.50” 106.00” 2 Down 16 Ga. SS 1101-SS-SMO 25.00” 139.00” 13.50” 144.00” Smooth 16 Ga. SS 1102-SS-2RBE 25.00” 139.00” 13.50” 144.00” 2 Down 16 Ga. SS

 

[shunter2005]

From there catalog
Tandem
New Additions to the tandem Fender line include 16 gauge stainless steel as well as the Rolled Beaded Edge options. Select sizes of triple front fenders are available on request. 1202-SS-SMO 25.00” 96.00” 13.50” 106.00” Smooth 16 Ga. SS 1202-SS-2RBE 25.00” 96.00” 13.50” 106.00” 2 Down 16 Ga. SS 1101-SS-SMO 25.00” 139.00” 13.50” 144.00” Smooth 16 Ga. SS 1102-SS-2RBE 25.00” 139.00” 13.50” 144.00” 2 Down 16 Ga. SS

You are correct, but those SS fenders are listed in the Dexter Truck and Transport fender guide catalog. They are for big rigs. If you look in the link I posted, there are no SS fenders listed, tandem or triple axle. That is why I suggested calling them to find out if they can and/or will make them in 9" or 10" width for a boat trailer.

https://www.dexteraxle.com/user_area/content_media/raw/RockwellTruckandTransportFenderGuide.pdf

Side note: When I ordered a set from Fenders and More before they sold out, shipping via a freight line from CA. to Houston, TX was about $200. They left the plant secured on a pallett, but when they arrived, they had been cut off the pallet and were just laying inside the trailer. I guess to save space. When they were delivered, they looked like shit with the edges all beat up, but with some work they cleaned up ok. I just read that Rockwell now ships all their fenders to distribution points on their own trucks. So, that might save some money on shipping.

 

[JBZ]

You are correct, but those SS fenders are listed in the Dexter Truck and Transport fender guide catalog. They are for big rigs. If you look in the link I posted, there are no SS fenders listed, tandem or triple axle. That is why I suggested calling them to find out if they can and/or will make them in 9" or 10" width for a boat trailer.

https://www.dexteraxle.com/user_area/content_media/raw/RockwellTruckandTransportFenderGuide.pdf

Side note: When I ordered a set from Fenders and More before they sold out, shipping via a freight line from CA. to Houston, TX was about $200. They left the plant secured on a pallett, but when they arrived, they had been cut off the pallet and were just laying inside the trailer. I guess to save space. When they were delivered, they looked like shit with the edges all beat up, but with some work they cleaned up ok. I just read that Rockwell now ships all their fenders to distribution points on their own trucks. So, that might save some money on shipping.

Oh Yes
I see that know
Well that sucks

 

[Gone_Flat]

You are correct, but those SS fenders are listed in the Dexter Truck and Transport fender guide catalog. They are for big rigs. If you look in the link I posted, there are no SS fenders listed, tandem or triple axle. That is why I suggested calling them to find out if they can and/or will make them in 9" or 10" width for a boat trailer.

https://www.dexteraxle.com/user_area/content_media/raw/RockwellTruckandTransportFenderGuide.pdf

Side note: When I ordered a set from Fenders and More before they sold out, shipping via a freight line from CA. to Houston, TX was about $200. They left the plant secured on a pallett, but when they arrived, they had been cut off the pallet and were just laying inside the trailer. I guess to save space. When they were delivered, they looked like shit with the edges all beat up, but with some work they cleaned up ok. I just read that Rockwell now ships all their fenders to distribution points on their own trucks. So, that might save some money on shipping.

When i showed up to pick up first set , they were on big racks kid grabbed first set from rack , i noticed same edges all beat to shit , i said noway am i buying this . They went to another rack and came back with like four other sets . I chose two of the best ones . But remember they are probably done in sets so got them home and noticed they dont sit perfectly on the ground . One was a tad longer than the other and obviously the shorter one was taller . Not a huge deal once mounted on trailer .
So is rockwell america the co. Name or is it dexter .

 

[shunter2005]

When i showed up to pick up first set , they were on big racks kid grabbed first set from rack , i noticed same edges all beat to shit , i said noway am i buying this . They went to another rack and came back with like four other sets . I chose two of the best ones . But remember they are probably done in sets so got them home and noticed they dont sit perfectly on the ground . One was a tad longer than the other and obviously the shorter one was taller . Not a huge deal once mounted on trailer .
So is rockwell america the co. Name or is it dexter .

Rockwell American. Owned by Dexter. From what I read, they have 3 fender manufacturing plants, but the one in Azle, TX (outside Ft. Worth) makes the majority of the fenders and then they ship them to the other Rockwell locations. I believe that all the manufacturing equipment from Fenders and More was loaded up and shipped to Azle.

 

[Backlash]

I just saw these on their site.....

Damn!

 

[Nanu/Nanu]

Yeah ss fenders are for ballers!!! Haha

I was going to recommend shadow or pacific.

 

[Gone_Flat]

I just saw these on their site.....

View attachment 1209758

Damn!

Thats 1,954$$$$ hell no !!!

 

[4Waters]

I just saw these on their site.....

View attachment 1209758

Damn!

Shiny things distract biden, no more shiny things

 

[JJ McClure]

I just saw these on their site.....

View attachment 1209758

Damn!

Shiny things distract biden, no more shiny things

Double damn! Ridin with Biden.

 

[Gone_Flat]

^^^^^^ thats just plain stupid !!!!my set was in the 400$ range 12" wide

 

[shunter2005]

That is crazy expensive!!!!!

 

[ChrisV]

Looking for 102"x11" fenders. Called dexter and they wont sell to the public.

 

[Oliver1421]

Looking for 102"x11" fenders. Called dexter and they wont sell to the public.

I was just at pacific trailers in corona two weeks ago, the guy that works there told me to give them the measurements you need and he can order them. He said getting fenders now is much easier than previously.

 

[ChrisV]

I was just at pacific trailers in corona two weeks ago, the guy that works there told me to give them the measurements you need and he can order them. He said getting fenders now is much easier than previously.

Located some. Thanks dawg

 

[N of the rvr]

As the title stated.

Where could i get stainless fenders for an tripple axle? Is it still backordered?


thank you.

I have three new pairs in stock. Give me a call with the length width and height and I’ll check what I have. I will sell for my cost which is about $1000. per pair for new polished SS triples. I also have several pairs of used SS tandems in good condition. (661)549-0606