WELCOME TO RIVER DAVES PLACE

[WTS] WellsCraft ski race boat for sale

riverrat707

Member
Joined
Feb 27, 2009
Messages
17
Reaction score
19
I am considering selling my WellsCraft. It was owned by Martie Wells for 20 years. I purchased the boat from him in 2020. In 2020 Martie had Redline Performance rebuilt the Whipple charged engine. It currently has 10 to 15 hours on it. WOT Marine installed new Jesel shaft roller rocker arms earlier this year. The outdrive is an IMCO SC with Bravo lab finish 30 and 32 pitch props. I rarely ran the boat over 45 mph, 1 time to 5300 rpm, 87 mph (on new Simrad chart plotter) down river at Parker. The engine dyno'd 6300 rpm. The trailer is a 2015 Pacific galvanized trailer.

I was looking at getting back into some ski racing, but I blew my knee out at work and things change.

The port IMCO Powerflow Plus exhaust riser needs to be replaced, it is getting some moisture in 2 cylinders on the port side as evident by spark plugs. Wide Open Throttle just completed a leak down on the engine and it passed with flying colors. The riser is on backorder from IMCO 3 to 4 months.

I am asking $25,000. If it does not sell I will turn it into a stock lake boat.
20220727_111147.jpg
 

Attachments

  • imagejpeg_0(12).jpg
    imagejpeg_0(12).jpg
    238 KB · Views: 356
  • IMG_1960.jpg
    IMG_1960.jpg
    715.3 KB · Views: 343
  • 20200715_172535.jpg
    20200715_172535.jpg
    838.6 KB · Views: 332
  • 20211122_133723.jpg
    20211122_133723.jpg
    924.2 KB · Views: 323
  • 20210125_134516.jpg
    20210125_134516.jpg
    883 KB · Views: 323
  • 20201211_145447.jpg
    20201211_145447.jpg
    716.7 KB · Views: 380
  • 20211124_104303.jpg
    20211124_104303.jpg
    982.6 KB · Views: 386
  • 20200925_185233.jpg
    20200925_185233.jpg
    781.7 KB · Views: 370
  • 20200715_172622.jpg
    20200715_172622.jpg
    1.4 MB · Views: 356

riverrat707

Member
Joined
Feb 27, 2009
Messages
17
Reaction score
19
I just spoke to Brad at IMCO. The Powerflow Plus risers have been cast. He also said I could remove the stainless plate in the riser and run the engine without any reversion concerns.

I had a buyer, First In from RDP, but his phone no longer works and he has not posted here since the last week I spoke to him in October. Just hope he is OK. Please let me know of anyone knows Dave.

If the boat does not sell quickly, I am looking to change it to a more stock setup as a family ski boat.
 

Attachments

  • 20221014_161357.jpg
    20221014_161357.jpg
    426.3 KB · Views: 48
  • 20221014_165843.jpg
    20221014_165843.jpg
    995.1 KB · Views: 50
Top