Vdrive parts

[bagged97taco]

I’m looking for a drive line flange for my solid driveline in our Cole race boat. It’s a 4 bolt flange and has 16 splines for the solid drive shaft. This one pictured is what I need but 16 splines Anyone got one?

 

[bigdawgmini]

Bergeron Engineering??

 

[bagged97taco]

Bergeron Engineering??

no Bergeron, casale, lenco , pretty much called everyone I can think of for Vdrive’s. It’s an older style flange so gonna be hard to find. But I need one asap

 

[oldschool]

Connelly Marine?

 

[bagged97taco]

Connelly Marine?

Yep no luck at Connelly.

 

[RiverDave]

If you absolutely can’t find one it isn’t impossible to make. I’d have to price out that broach though

 

[getreal]

EDM would be cheaper

 

[bagged97taco]

If you absolutely can’t find one it isn’t impossible to make. I’d have to price out that broach though

That’s the issue. We have 2 races left with this setup then going to a bigger power plant and a clutch in the boat. So this new shaft is for 2 races only.

 

[Rjt01]

Did u try Tom Bentley at menkins ???? [email protected]

 

[Rjt01]

I have his number if u want it ???

 

[Rjt01]

Just reached out to all my buddy’s. Hopefully someone has one sitting

 

[braindead]

Glenwood?

 

[nrbr]

I'll check the stash tomorrow

 

[Beautiful Noise]

Glenwood?

X2 Glenwood Marine

 

[Rjt01]

X2 Glenwood Marine

Good luck with glenwood , they never answer the phone and they are almost closed doors . It’s only the woman that works there now .

 

[bagged97taco]

Ill try menkins today. Thanks guys

 

[Rjt01]

Ill try menkins today. Thanks guys

Good luck

 

[Terminal Velocity]

I'll try and swing by my shop tonight and see what i have, i've got a couple different ones but can't remember what. is it 16 spline square or a v-groove?

 

[Jed-O]

Have you tried calling Wilkes?

 

[Clank123]

Dang 16 huh, all my solid driveline Circle boat stuff is 21.
Good luck on the search.

 

[bagged97taco]

So here’s my question. Both the Cole and my canyon flat have a 16 spline input shaft at the casale. Most others we are finding out just have a key way, no splines. What happened to all the 16 spline input shaft flanges for the drive shafts. They all need one? Pic is for reference to input shaft

 

[franky]

I would give Gary Kincaid a call....

 

[Beautiful Noise]

Good luck with glenwood , they never answer the phone and they are almost closed doors . It’s only the woman that works there now .

When I stop by Glenwood I always go in though the back

 

[rivergames]

When I stop by Glenwood I always go in though the back

Thats the only way to get in and they're always there.

 

[River Dan]

Just noticed on Facebook there is a V- Drive Classified group. Did not join or go on there, you might try there.

 

[Terminal Velocity]

Sorry I don’t have anything. Just the standard and a 21 tooth.

 

[bagged97taco]

Sorry I don’t have anything. Just the standard and a 21 tooth.

Thanks for checking. Kinda at a loss with this. May have to switch up our whole program.

 

[FlatNv]

that sucks I run whats in your 1st post 10 spline, did you try JJ beaver fab? worth a shot

 

[bagged97taco]

that sucks I run whats in your 1st post 10 spline, did you try JJ beaver fab? worth a shot

Yea tried jj. I think we have it figured out. Between my lake flat and the race flat we can make it work with what we have. We will see soon

 

[warpt71]

Bringing this back up because I went out and checked my "new" solid driveline setup and I'm missing the flywheel end coupler. The shaft is 16 spline as well, wondering if you ever found anything?

 

[bagged97taco]

Bringing this back up because I went out and checked my "new" solid driveline setup and I'm missing the flywheel end coupler. The shaft is 16 spline as well, wondering if you ever found anything?
View attachment 817122
View attachment 817121
View attachment 817120

No. We ended up ordering a new solid driveline from mark Williams. He makes 16 splines. But they aren’t the same 16 splines as casale. So we put it all back together the way it was and didn’t have any issues making 14 passes down the track spinning 8k rpms.

 

[bagged97taco]

Do you need the crank button for a 16 spline. Mounts to flywheel pto? I have one on my canyon. But I think I found one for sale somewhere. I’ll try to think where and let you know.

 

[warpt71]

No. We ended up ordering a new solid driveline from mark Williams. He makes 16 splines. But they aren’t the same 16 splines as casale. So we put it all back together the way it was and didn’t have any issues making 14 passes down the track spinning 8k rpms.

Hummmmmm wonder what kind of problems I'm going to run into lol I have all the flanges from my other flat and the slip yoke driveline that goes with it at worst case I guess. I really didn't want to rob any rigging from it though.

 

[bagged97taco]

well casale cant make any 16 spline stuff anymore. So it’s gonna be finding some old timer that has some parts on a shelf. Or ordering all new stuff. Which ain’t cheap.

 

[warpt71]

Do you need the crank button for a 16 spline. Mounts to flywheel pto? I have one on my canyon. But I think I found one for sale somewhere. I’ll try to think where and let you know.

Yes! That is what I will need. Glad I reread this thread cause I missed this post the first time through. Thankfully the v-drive side is sorted out.

 

[bagged97taco]

Yes! That is what I will need. Glad I reread this thread cause I missed this post the first time through. Thankfully the v-drive side is sorted out.

I’ll look for where I saw it. And let you know.

 

[RexHoes]

Do you need the crank button for a 16 spline. Mounts to flywheel pto? I have one on my canyon. But I think I found one for sale somewhere. I’ll try to think where and let you know.

Did anyone ever find one? Nobody has any 16 spline Casale stuff….I know this post is way old I’m getting desperate…

 

[warpt71]

@RexHoes I was able to find a used crank button eventually. I think @bagged97taco sold all of his stuff, hopefully he will chime in. What parts are you looking for?