The First Hallett Vector built by Davis boat MFG (customer build)

[Nordic Boats]

Well here it is the first Hallett Vector built by the Hallett/ Nordic team. Will keep you guys updated.

 

[hallett21]

Propulsion?!


Sent from my iPhone using Tapatalk

 

[Done-it-again]

Cant wait to watch this come to life......

 

[tony]

So awesome!!! I really can't wait to see her come to life. I'm interested in what power this is going to have?

 

[AZMIDLYF]

What size? 21 ft?

 

[River Lynchmob]

What size? 21 ft?

Vector's are 21'

 

[HighVoltage329]

Nice to see a new one being built. When I ordered mine in '94 it was a big boat to us. Still have it.

 

[Hallett_Whacker]

Awesome. 210 on the deck?

 

[Hondo-407]

Propulsion?!


Sent from my iPhone using Tapatalk

Sweet Baby Jesus please don't say a Weed-Wacker...

 

[hallett21]

Sweet Baby Jesus please don't say a Weed-Wacker...

Hope it’s a 400 [emoji1303]

Sent from my iPhone using Tapatalk

 

[riverholic88]

looking forward to this build...The "old" Hallett should have laid more of these up but the salesman said they would never sell

 

[guest hs]

Hope it’s a 400 [emoji1303]

View attachment 695776



Sent from my iPhone using Tapatalk

I hope its not lol

 

[AZMIDLYF]

There is a Schiada 400R owner that might disagree with you.

 

[Cartozian]

This will be cool to see!

 

[Singleton]

Hope it’s a 400 [emoji1303]

View attachment 695776



Sent from my iPhone using Tapatalk

Hopefully Kyle and Cole at WOT treated you right.
So pissed the city of Carlsbad is giving them a hard time and made them close for a short period of time. The city keeps changing the zoning in that area!

 

[hallett21]

Hopefully Kyle and Cole at WOT treated you right.
So pissed the city of Carlsbad is giving them a hard time and made them close for a short period of time. The city keeps changing the zoning in that area!

Always great service from them!!


Sent from my iPhone using Tapatalk

 

[hallett21]

@Nordic Boats will there be any major changes to how you lay up the boat? I assume all composite.

 

[AZMIDLYF]

Looks to have a nice pad bottom. What speeds are you running with yours Hallet21? What is the deadrise on these?

 

[hallett21]

Looks to have a nice pad bottom. What speeds are you running with yours Hallet21? What is the deadrise on these?

Delta pad bottom

Optimax 250xs 1.75 TM lower unit with a 23 trophy will run 68 with 3 on board and 30 gallons of fuel.

WOT Marine just went through the boat and put a new floor, jack plate (Gil setback bracket cracked) and a few other things. I haven’t had a chance to raise the motor yet.

Motor has almost 700 hours.

As it’s setup it’ll pull 3 skiers up with 4-5 people in the boat. I’m excited to see Nordic building one and I hope it gets an outboard.

I think Hallett missed the boat not building more outboard vectors. Especially with today’s motors. You can fit 6-7 people comfortably but we’ve had as many as 12 before (not recommended lol)

Not 100% but there was a vector at Halletts in Havasu with a 300. Pretty sure he is into the 70s


Sent from my iPhone using Tapatalk

 

[hallett3]

Can’t wait to see. Please put the Steering on port side.

 

[Nordic Boats]

The Vector is coming along, spraying the deck this morning. The hull is done, fitting stringers today. Notice the composite transom.

 

[AZMIDLYF]

Soooo, still not giving up what's going to motor-vate this rig?

 

[CobraDave]

I know it’s not common to release pricing info but we gotta know. The vector is a cool boat. What’s the pricing with an 8.1 Mag?


Sent from my iPhone using Tapatalk

 

[guest hs]

I know it’s not common to release pricing info but we gotta know. The vector is a cool boat. What’s the pricing with an 8.1 Mag?


Sent from my iPhone using Tapatalk

8.1 is no longer produced it would be an 8.2

 

[Nordic Boats]

Stringers are in, deck is being laminated with carbon fiber.

 

[Flying_Lavey]

Not 100% but there was a vector at Halletts in Havasu with a 300. Pretty sure he is into the 70s


Sent from my iPhone using Tapatalk

You are correct. That's Vossmeyer (Uncle of Murdered Vector). He's had it for a few years. I think he may be the only person that can rival Walt for how many boats hes gone through. Lol! Hes hit 80 in that boat. But its not set-up for top speed. Also, one of the nicest people ive ever met.

Sent from my LM-G710VM using Tapatalk

 

[AZMIDLYF]

Ok, so we know it will not have an outboard.

 

[SOCALCRICKETT]

Ok, so we know it will not have an outboard.

That was my thought, no cut out on the topdeck at the stern for when motor is at th tilt and i noticed there arent any knees in thr stringer pic

Sent from my SM-G930P using Tapatalk

 

[hallett21]

You are correct. That's Vossmeyer (Uncle of Murdered Vector). He's had it for a few years. I think he may be the only person that can rival Walt for how many boats hes gone through. Lol! Hes hit 80 in that boat. But its not set-up for top speed. Also, one of the nicest people ive ever met.

Sent from my LM-G710VM using Tapatalk

80? If that’s confirmed I need to step it up


Sent from my iPhone using Tapatalk

 

[Flying_Lavey]

80? If that’s confirmed I need to step it up


Sent from my iPhone using Tapatalk

Its been quiet a while since i talked to him about it but I'm fairly certain it was a touch over 80. Ol Hambone probably knows with more certainty what his big number is.

Sent from my LM-G710VM using Tapatalk

 

[CobraDave]

8.1 is no longer produced it would be an 8.2

You know what I fuckin mean!!!


Sent from my iPhone using Tapatalk

 

[guest hs]

Actually I didn't they are two totally different engines. Sorry if I offended you.

 

[AZMIDLYF]

Not to sidetrack this thread but, who has these molds?

 

[AZMIDLYF]

What's the latest and can you tell me what the deadrise is for the Vectors?

 

[hallett21]

Not to sidetrack this thread but, who has these molds?

Member here 138 owns them. I think he was selling them to Australia...?




Sent from my iPhone using Tapatalk

 

[hallett21]

Any updates??


Sent from my iPhone using Tapatalk

 

[Nordic Boats]

 

[River Lynchmob]

Looks good. I think this is the 1st Vector I have seen without "hockey sticks" on the deck.

 

[DrunkenSailor]

Wish I could like this more than once. Bitchen boat.

 

[hallett21]

[emoji1303][emoji1303][emoji41]


Technically coin toss was just white but that one started out with hockey sticks originally


Sent from my iPhone using Tapatalk

 

[hallett3]

Love the gel design going to be a bad ass boat

 

[AZMIDLYF]

This thing is checking all the right boxes!

 

[funkcity]

I don't ever remember a 240 style raised keel pad on a Vector.
Usually no pad or a delta pad insert. That is a mod to the original
straight V design. I wonder when that happened?

 

[Melloyellovector]

Looks good. I think this is the 1st Vector I have seen without "hockey sticks" on the deck.

Mine were removed, but since someone likes working on my boat 30 minutes a week max maybe you haven’t “seen it” lol

 

[hallett21]

I don't ever remember a 240 style raised keel pad on a Vector.
Usually no pad or a delta pad insert. That is a mod to the original
straight V design. I wonder when that happened?

My 90 has the same bottom


Sent from my iPhone using Tapatalk

 

[Melloyellovector]

Mines an 89 and looks identical, so that happened loooong ago. Lol

I don't ever remember a 240 style raised keel pad on a Vector.
Usually no pad or a delta pad insert. That is a mod to the original
straight V design. I wonder when that happened?

 

[02HoWaRd26]

Soooo, still not giving up what's going to motor-vate this rig?

I’ve noticed they never seem to answer any questions asked.

 

[hallett3]

I’ve noticed they never seem to answer any questions asked.

I’m thinking that this is a hull sale only and owner rig it. Who knows. Don’t know what the liability would be unless sold as race hull only . I knew a few guys who bought hull only vectors but they were stamped race only.

 

[02HoWaRd26]

I’m thinking that this is a hull sale only and owner rig it. Who knows. Don’t know what the liability would be unless sold as race hull only . I knew a few guys who bought hull only vectors but they were stamped race only.

Not just this thread..... I’ll leave it alone beyond that.

 

[retaocleg]

I believe this is going to be rigged with owner supplied big hp...…….

as for the hockey sticks, I tried to talk the owner into fully blending the bow, with updated hockey sticks...….he said he and friends walk all over the deck and wants something he wont have to keep detailing the scratches out of.....agreed