Since i can't be the only one on here that has Milwaukee Packout

[H20 Toie]

Turns out i have a few extra labels/latches
Now that i can make anyone i want no reason to keep extras around,
If anyone wants any of these let me know and ill send them to you, No Charge
The ones with 4 prongs fit any cases with 4 prongs, same with the 5 prong ones
the 3/8 socket one fits any of the 2 or 3 drawer cases
the wrenches are for the small low profile cases

Dan 818 253 6780

 

[JUSTWANNARACE]

Turns out i have a few extra labels/latches
Now that i can make anyone i want no reason to keep extras around,
If anyone wants any of these let me know and ill send them to you, No Charge
The ones with 4 prongs fit any cases with 4 prongs, same with the 5 prong ones
the 3/8 socket one fits any of the 2 or 3 drawer cases
the wrenches are for the small low profile cases

Dan 818 253 6780

View attachment 1443189

That case reads as if it could be a great x-rated film

 

[Cray Paper]

I am working on a bio tech lab project again, and every finish subcontractor employee seems to have a ridiculous amount of these pack out kits being towed behind them. Dan I hope you finagled a way in to getting a cut on pack out sales

 

[lbhsbz]

Damn Dan...you need to take up drinking or something

 

[DMF]

Ballpark, what is your investment at this point?

 

[was thatguy]

No, sorry…you are the only one.

 

[DMF]

I am a contractor, this is impressive!

 

[yz450mm]

https://www.tiktok.com/video/7394262020704521514

 

[H20 Toie]

Ballpark, what is your investment at this point?

Same accounting system for how much do i spend keeping the square body running.
or how much for boat parts and repairs
No idea and not going to track it

 

[was thatguy]

Same accounting system for how much do i spend keeping the square body running.
or how much for boat parts and repairs
No idea and not going to track it

Did you get your own place yet…?

 

[TimeBandit]

Cocaine might be cheaper, jus' sayin.

 

[lbhsbz]

Also, get that mini mill on a firm bench and bolt everything down…bench to the floor and mill to the bench. It’ll be a lot nicer to use.

Then you can take your 3D printer and print a hanger for a nice set of digital calipers.

 

[H20 Toie]

Also, get that mini mill on a firm bench and bolt everything down…bench to the floor and mill to the bench. It’ll be a lot nicer to use.

Then you can take your 3D printer and print a hanger for a nice set of digital calipers.
View attachment 1443371

What you don’t think sitting on a Milwaukee packout stack is secure ?
Maybe if I get serious about using it but right now I don’t have much space so being mobile is a benefit
I was expecting to get shit from someone for having a 250 pound mil on a pack out table rated for 50 pounds
Don’t need to to carried away with calipers, what I have works pretty well for my limited capabilities

 

[lbhsbz]

It’ll be a different machine all together. I had mine on a toolbox in initially, was a horrible piece of shit. After I solid mounted it, it was a usable horrible piece of shit.


Meh, sell it and a buy Bridgeport clone.

Then you need a lathe, and a bandsaw (3 bandsaws actually…verticals and horizontal…and a fast one for wood) at the very least. Then a big rotary table for the mill, lol

Do you have a plasma cutter yet? Those are cool because then you get to buy a big air compressor, and then upgrade the panel on the house and install a 100A subpanel for the garage….so now that you’ve got power, you can buy a bigger welder…then get a phase converter and buy a bigger mill and lathe that run on 3 phase, and….

 

[H20 Toie]

It’ll be a different machine all together. I had mine on a toolbox in initially, was a horrible piece of shit. After I solid mounted it, it was a usable horrible piece of shit.


Meh, sell it and a buy Bridgeport clone.

Then you need a lathe, and a bandsaw (3 bandsaws actually…verticals and horizontal…and a fast one for wood) at the very least. Then a big rotary table for the mill, lol

Do you have a plasma cutter yet? Those are cool because then you get to buy a big air compressor, and then upgrade the panel on the house and install a 100A subpanel for the garage….so now that you’ve got power, you can buy a bigger welder…then get a phase converter and buy a bigger mill and lathe that run on 3 phase, and….

Actually a lathe is one thing i have zero desire to have. Not sure why but don't want one,
Got the bandsaw covered, its portable or on the table with one screw, I almost bought a bigger one the other day but the guy didn't accept my offer.
Sold my big air compressor few months ago, ( before i knew i was moving into the barn) If i get a plasma cutter it will be one with built in air. I need to learn to weld before i worry about cutting shit up

 

[Orange Juice]

Recently was looking for an angle grinder. None of them come with a battery. I looked at batteries and saw they were around $250.
Decided I could buy extension cords for the price Of a battery, and for as often as I need one, it will be charged when Im ready to use it

 

[H20 Toie]

Recently was looking for an angle grinder. None of them come with a battery. I looked at batteries and saw they were around $250.
Decided I could buy extension cords for the price Of a battery, and for as often as I need one, it will be charged when Im ready to use it

Where the hell are you shopping?
Just buying one tool its hard to justify battery tools from any maker, once your using different ones it isn't so bad, i also buy tools off of FB and such, or look at sales, which can drop the price in half, but never buy batteries off FB or Ebay lots of fake ones out there

 

[Orange Juice]

There's the $269 Home Depot battery starter kit.

Milwaukee M18 18-Volt Lithium-Ion High Output Starter Kit with Two 6.0 Ah Battery and Charger 48-59-1862S - The Home Depot

The MILWAUKEE M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery 2-Pack System Starter Kit includes two batteries and an M18/M12 Battery Charger. The M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Packs provide 50% more

www.homedepot.com

 

[H20 Toie]

Yeah F that, go with this

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 4-1/2 in./5 in. Grinder w/Paddle Switch w/(2) 5.0Ah Batteries & Charger 2880-20-48-59-1852B - The Home Depot

The MILWAUKEE M18 FUEL 4-1/2" / 5" Grinder Paddle Switch, No Lock is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge.

www.homedepot.com

 

[Icky]

There's the $269 Home Depot battery starter kit.

Milwaukee M18 18-Volt Lithium-Ion High Output Starter Kit with Two 6.0 Ah Battery and Charger 48-59-1862S - The Home Depot

The MILWAUKEE M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery 2-Pack System Starter Kit includes two batteries and an M18/M12 Battery Charger. The M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Packs provide 50% more

www.homedepot.com

In store that comes with a free tool right now

 

[bonesfab]

Actually a lathe is one thing i have zero desire to have. Not sure why but don't want one,
Got the bandsaw covered, its portable or on the table with one screw, I almost bought a bigger one the other day but the guy didn't accept my offer.
Sold my big air compressor few months ago, ( before i knew i was moving into the barn) If i get a plasma cutter it will be one with built in air. I need to learn to weld before i worry about cutting shit up
View attachment 1443396

I have one of those swag tables and they make it so much nicer. The porta band blades are cheap compared to the big band saw blades..

 

[DLC]

I just bought 2 new M 18 batts

12 & 8

 

[Eliminator21vdrive]

I have one of those swag tables and they make it so much nicer. The porta band blades are cheap compared to the big band saw blades..

And they store easier

 

[Bigbore500r]

@H20 Toie did you see they came out with a front-access packout box with a slide out drawer??? FINALLY !
You can get to big shit , without unstacking your stack of stacks

 

[River Dirt 2]

15% off!!

https://www.supplyhouse.com/Milwaukee

 

[NicPaus]

My order showed 36% off on the packouts from HD.

 

[H20 Toie]

@H20 Toie did you see they came out with a front-access packout box with a slide out drawer??? FINALLY !
You can get to big shit , without unstacking your stack of stacks

yep but it will be next year before its released

 

[Bigbore500r]

yep but it will be next year before its released

Well that's a buzz kill!

 

[H20 Toie]

I have one of those swag tables and they make it so much nicer. The porta band blades are cheap compared to the big band saw blades..

i'm amazed at how much i use it, i went and ordered another insert from them and modified it to fit my router, so now with just one bolt i can go from Bandsaw to Router table

 

[bilz]

Yeah F that, go with this

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 4-1/2 in./5 in. Grinder w/Paddle Switch w/(2) 5.0Ah Batteries & Charger 2880-20-48-59-1852B - The Home Depot

The MILWAUKEE M18 FUEL 4-1/2" / 5" Grinder Paddle Switch, No Lock is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge.

www.homedepot.com

I am deep into M12, a deal like this started my M18 slide. I'm afraid I'll be off the deep shortly.

 

[Backlash]

i'm amazed at how much i use it, i went and ordered another insert from them and modified it to fit my router, so now with just one bolt i can go from Bandsaw to Router table
View attachment 1444845

I like that as a mini portable router table!!

 

[NicPaus]