Show me yours, I'll show you mine..... pics

[W.O.T MARINE]

Nope, heading to the island for the weekend with the family, i have been having back problems since catalina race. plus were selling the boat, so its locked up tight and clean. you skiing again next year? i may just do a few here and there but like you work comes first, training last!

Not real sure about next year, but i am skiing outboard this weekend, first race in quite a while. well see how it goes.

 

[LAVEYNICK]

here's my 87 eliminator liberty with a 200 johnson gt

 

[hallett21]

Sweet looking boat! Have you had it out yet?

 

[LAVEYNICK]

Thanks! ive only driven the boat twice. Once test driving it at lake perris and the other at the river for the weekend shortly after i started the resto . I really like how the boat ran and handled from the breif seat time ive had in it.

 

[hallett21]

How does it perform with that 200? Seems like the perfect Parker/ski boat

 

[LAVEYNICK]

How does it perform with that 200? Seems like the perfect Parker/ski boat

the boat runs in the low 60s with a small 20 pitch prop and has rediculous torque so im gona put a larger pitch prop on it and i just got a jack plate for it with a ten inch setback..i would like to hit 70 so we will see:thumbsup

 

[LAVEYNICK]

btw your vector is badass!!..i think ive seen u in moabi last summer the boat looks awesome!

 

[RitcheyRch]

Very nice and similar colors to my Stoker. :thumbsup:thumbsup

here's my 87 eliminator liberty with a 200 johnson gt
View attachment 187708

View attachment 187709

View attachment 187710

 

[hallett21]

btw your vector is badass!!..i think ive seen u in moabi last summer the boat looks awesome!

Thank you! Well now Ill know what boat to look out for this summer :thumbsup

 

[ONE-A-DAY]

86 Mirage River Racer / Merc 2.4


MedicalPlanQuotes.com / IPhone

 

[Nice Pair]

Havn't been here for a while, I've done a complete re-rig and triler paint on my little red boat.

 

[Wheeler]

Havn't been here for a while, I've done a complete re-rig and triler paint on my little red boat.

Very nice! :thumbsup:thumbsup

 

[Nice Pair]

Very nice! :thumbsup:thumbsup

Thanx, Its been a fun project.

 

[LAVEYNICK]

She's almost done!

 

[K-DOG]

My 21' Cheetah

 

[Zaairman]

Last weekend

 

[951prerun]

94' 21 Daytona - 260

 

[ONE-A-DAY]

Havn't been here for a while, I've done a complete re-rig and triler paint on my little red boat.

Is that a Talon?


Sent from my iPad using Tapatalk HD

 

[Nice Pair]

Yessir, 1993, 22' Talon. Big Fun - 4 sale. :thumbsup

 

[28skater]

28 Skater twin 300x motors launching last week at favorite spot 5 minutes from home in Huntington Harbor ramps are always empty on weekdays and the ocean is much more challenging that buzzing the river in a big cat.:champagne:

 

[LAVEYNICK]

Newly restored!

 

[Zaairman]

28 Skater twin 300x motors launching last week at favorite spot 5 minutes from home in Huntington Harbor ramps are always empty on weekdays and the ocean is much more challenging that buzzing the river in a big cat.:champagne:

I've been to that ramp many times... My uncle lives 3 mins from there.

 

[bakertunnel]

200 Mariner and just seems to go in rough water and is for sale

 

[mesquito_creek]

posture and glide....

 

[sprintcvx]

Here's mine

All tucked in for the winter

 

[stevo13]

Picked this up this weekend

 

[hallett21]

Very cool!!! Can we get more info on the boat?

 

[stevo13]

its a 97 21 footer built i believe as a training boat for ski racing with a delta pad bottom fun fast and light

 

[hallett21]

How's it do with that 2.5?? Love the boat! Didn't know schiada did a delta pad

 

[blacksox]

 

[stevo13]

Ran the schiada over the weekend and it ran 72 still have rpm left gotta mess with props

 

[20stoker]

this is the boat that started it all for me...it was my uncle steves 20 stoker called lunatic fringe...ive known i would have a stoker since i was 5 yrs old!

this is my dads eliminator 207 edge...it started life out as a stern drive. we bought it as a bare hull and we converted it to an outboard...built the interior from scratch and did all the rigging...great father son memories!

this is my stoker sport tunnel...once i get the motor all dialed in (im fighting a detonation issue) it should be running in the 90's

 

[mlt]

1998 Stoker 20.4.....225 Pro xs with 650 hrs...just traded in on a new 300 xs !!! can't wait

 

[War Canoe]

1998 Stoker 20.4.....225 Pro xs with 650 hrs...just traded in on a new 300 xs !!! can't wait View attachment 262896 View attachment 262897

You might see some big speeds with it...we got 113 mph, and there is 1 or 2 more left in it. :skull

 

[mlt]

View attachment 262900

You might see some big speeds with it...we got 113 mph, and there is 1 or 2 more left in it. :skull

I have been watching and following your quest for big numbers with that 300xs/cougar combo(really impressive ) and the best part is I have seen a lot of pictures of your boat never seen one with the engine cowling off ....I had a 21 Daytona for 16 years with 2.4 and 2.5 motors and the engine cowlings should have had Velcro on them they were off so much we sure have come a long way .... I have started to accumulate some props....labbed 28 et....Ron hill 4 blade 30 p signature series....any suggestions?

 

[War Canoe]

I have been watching and following your quest for big numbers with that 300xs/cougar combo(really impressive ) and the best part is I have seen a lot of pictures of your boat never seen one with the engine cowling off ....I had a 21 Daytona for 16 years with 2.4 and 2.5 motors and the engine cowlings should have had Velcro on them they were off so much we sure have come a long way .... I have started to accumulate some props....labbed 28 et....Ron hill 4 blade 30 p signature series....any suggestions?

For the 300xs, here are some of our favorites...
30 Hydromotive ....fast and stable in the roughest water...We used it for out third leg at the Parker 300 Enduro. Pulled 4 min lap times...dipped to a 3:57 :skull

32 pitch 3 Blade Hackney...with the motor even to the bottom, still ran a 106 MPH speed. ran 112+ MPH with the motor 1 3/4" up. Ran 4 min flat several laps at Parker...less stable in the super rough conditions, but fast !

30 Spinelli 4 blade...hard to find, but Scarlata ran 150 miles with it at Parker and ran 4 min as well....

BBlades 30 Blaster...vicious mid range, good all round blade.

Hoss 32 pitch 3 blade...fast and did not like smooth water.

Merc pro ET 4 blade 32 pitch....112 MPH great ride, spendy...

Hackney 34 4 blade...ran 113 MPH on the limiter. Great wheel !! Better holeshot than expected !!

We are going to up the performance of the War Canoe...lightened flywheel and no rpm restrictor. In talks with Taylor on a 15 inch mid. Should wake it up.

For the 280's Short shafts, we are going to experiment with some 22 pitch (Quarter mile) to 32 pitch merc cleavers, lightning ET's and Drag 4's. We will also contact Brad @ B Blades and see what he thinks will work.

Tim Hackney will also be a source, due to our screaming success with his wheels...

The Church never met a prop we didn't like...they all do something well, you have to find the ones that work for your particular application.

Unexpected prop of the year was a 27 Trophy on the War Canoe ....Made it a short course heater. It turned better, and accelerated harder than we ever imagined. and, IT"S CHEAP!!!

and here's a "no cowl" pic !!

 

[STV_Keith]

Can't believe I'm not in on this thread before today...but I'll play.

The hot rod: 92 STV Pro Comp Ski w/2.5-260hp. Been 112 on GPS in Havasu.




The party boat: 86 Scarab 30' center console w/twin Monty Racing 4.0l 2-stroke V8's with Merc gearcases. Runs good for an old, heavy offshore boat.




In the COR 2.0 class (what used to be Mod VP back in the day), I drive this for R&R Prop Shop out of Henderson, NV: 20' Stoker w/Merc 2.0l

 

[War Canoe]

Can't believe I'm not in on this thread before today...but I'll play.

The hot rod: 92 STV Pro Comp Ski w/2.5-260hp. Been 112 on GPS in Havasu.

View attachment 262911 View attachment 262912


The party boat: 86 Scarab 30' center console w/twin Monty Racing 4.0l 2-stroke V8's with Merc gearcases. Runs good for an old, heavy offshore boat.

View attachment 262914 View attachment 262915 View attachment 262916


In the COR 2.0 class (what used to be Mod VP back in the day), I drive this for R&R Prop Shop out of Henderson, NV: 20' Stoker w/Merc 2.0l

View attachment 262917 View attachment 262919

You can haul ALL the chicks in that thing !! :thumbup:

 

[STV_Keith]

You can haul ALL the chicks in that thing !! :thumbup:

I try...

 

[mlt]

For the 300xs, here are some of our favorites...
30 Hydromotive ....fast and stable in the roughest water...We used it for out third leg at the Parker 300 Enduro. Pulled 4 min lap times...dipped to a 3:57 :skull

32 pitch 3 Blade Hackney...with the motor even to the bottom, still ran a 106 MPH speed. ran 112+ MPH with the motor 1 3/4" up. Ran 4 min flat several laps at Parker...less stable in the super rough conditions, but fast !

30 Spinelli 4 blade...hard to find, but Scarlata ran 150 miles with it at Parker and ran 4 min as well....

BBlades 30 Blaster...vicious mid range, good all round blade.

Hoss 32 pitch 3 blade...fast and did not like smooth water.

Merc pro ET 4 blade 32 pitch....112 MPH great ride, spendy...

Hackney 34 4 blade...ran 113 MPH on the limiter. Great wheel !! Better holeshot than expected !!

We are going to up the performance of the War Canoe...lightened flywheel and no rpm restrictor. In talks with Taylor on a 15 inch mid. Should wake it up.

For the 280's Short shafts, we are going to experiment with some 22 pitch (Quarter mile) to 32 pitch merc cleavers, lightning ET's and Drag 4's. We will also contact Brad @ B Blades and see what he thinks will work.

Tim Hackney will also be a source, due to our screaming success with his wheels...

The Church never met a prop we didn't like...they all do something well, you have to find the ones that work for your particular application.

Unexpected prop of the year was a 27 Trophy on the War Canoe ....Made it a short course heater. It turned better, and accelerated harder than we ever imagined. and, IT"S CHEAP!!!

and here's a "no cowl" pic !!

Wow ...that's a lot of testing props(I have been surprised on what strange props have worked and never assume anything and try everything)....I had a Spinnelli 28 DR 4 which was the best "all around" prop for my Daytona sadly it went with the boat...do you think the war canoe could have pulled a 34 Pro E T ?(at stock power levels)....Thx for the help....Larry

 

[mlt]

Can't believe I'm not in on this thread before today...but I'll play.

The hot rod: 92 STV Pro Comp Ski w/2.5-260hp. Been 112 on GPS in Havasu.

View attachment 262911 View attachment 262912


The party boat: 86 Scarab 30' center console w/twin Monty Racing 4.0l 2-stroke V8's with Merc gearcases. Runs good for an old, heavy offshore boat.

View attachment 262914 View attachment 262915 View attachment 262916


In the COR 2.0 class (what used to be Mod VP back in the day), I drive this for R&R Prop Shop out of Henderson, NV: 20' Stoker w/Merc 2.0l

View attachment 262917 View attachment 262919

Hey Keith...... just curious did your STV come from north of the border sure looks like an STV that used to belong to a fellow named Anthony near Toronto(probably not but sure looks like it)...just curious....nice rig buy the way...MLT :thumbup:

 

[STV_Keith]

Hey Keith...... just curious did your STV come from north of the border sure looks like an STV that used to belong to a fellow named Anthony near Toronto(probably not but sure looks like it)...just curious....nice rig buy the way...MLT :thumbup:

Yes, it was Anthony Santocono's. I bought it from him in 02.

 

[mlt]

new 300 xs installed ready for break-in this weekend! :thumbup:








ATTACH=CONFIG]269830[/ATTACH]

 

[F14]

21 Daytona, 300XS

 

[951prerun]

21 Daytona, 300XS

Such a good picture! God I love your boat!

 

[bildit4u]

 

[951prerun]

View attachment 285930 View attachment 285931

Great looking boat!

 

[JFT]

DCB F26

 

[mlt]

DCB F26

View attachment 288195 View attachment 288196

very nice DCB...beautiful colour scheme:thumbsup

 

[stoker22405]

new 300 xs installed ready for break-in this weekend! :thumbup:








ATTACH=CONFIG]269830[/ATTACH] View attachment 269831 View attachment 269832

How did it run.....What prop are you running....?