Rexone's Garage Sale

[Rexone]

I'm listing a bunch of new old stock items for sale. Please reach out if there's anything you're interested in. Mike 909-476-0335
Some prices -
Steering helm (Morse 300252 rack helm), 4" extension, 9 bolt hub, bezel, $270, I will break this up if someone wants part of it. Inquire, all parts are new
Rudder boxes - $125 each, there are 2, 1"
Shaft log seal bronze 1" - $79
Shaft log seal bronze 1 1/8" - $79
Shaft log seal chrome 1" water dump type - $79
Merc Water pump plate 1" NPT - $125
Stainless Marine Water outlet divider BBC - $90
Holley Dual Feed Fuel Block - $45
Power Take off flange Chev 1350 for flexplate used - $100
Power Take off flange 8 bolt, (Chrysler?) bolt circle across bolts is a hair under 4", 1310 driveline, used - $100

 

[Kachina26]

Nice to see a post from you. Hope all is well.

 

[Rexone]

Polishing Lathe professional, double sided shaft, comes with some wheels etc, 7.5 HP motor $1500 obo​

 

[Rexone]

Wilcap Marine Flywheel for externally balanced 454 Marine engine. New old stock. This was on a display engine for boat shows but has never been run or had starter contact.
14 1/4" diameter 168 tooth ring gear
Weight is 11.55 lbs

$300

 

[Rexone]

$375 ~ BB Chevy Wet Flange Log Manifolds, Pair. These are either Harman Marine or PFM, (name is polished off flange) manifolds commonly used on Turbo applications but great in any application. Normally I get $800 for a set of these pressure checked, studs replaced and polished. Since these have not had that treatment I'm selling for $375. If buyer pressure checks and they leak internally I will refund upon video of them leaking within 30 days. Don't come to me a year from now claiming they leak. There are no visible cracks and out of dozens of these I've sold over the years I've only had a couple that leaked. Wet flange manifolds are a fairly rare find. There are 3 studs broken off, 2 on one and 1 on the other. This is common for these as the studs over time corrode and seize up on removal of risers. I can ship these and will quote shipping on case by case basis depending on destination. Send me a DM

 

[Rexone]

$500 ~ BB Chevy Wet Flange Log Manifolds, Pair. These are either Harman Marine or PFM, (name is polished off flange and are coated black) manifolds commonly used on Turbo applications but great in any application. Normally I get $800 for a set of these pressure checked. Since these have not had that treatment I'm selling for $500 including risers. If buyer pressure checks and they leak internally I will refund upon video of them leaking within 30 days. Don't come to me a year from now claiming they leak. There are no visible cracks and out of dozens of these I've sold over the years I've only had a couple that leaked. Wet flange manifolds are a fairly rare find. One manifold had an obvious external crack so I had it professionally Tig welded. I can ship these and will quote shipping on case by case basis depending on destination. Send me a DM

 

[Rexone]

$600 Harman Marine bolt through manifolds and risers for 460 Ford. Normally I get $800 for a set of these pressure checked. Since these have not had that treatment I'm selling for $600 including risers. If buyer pressure checks and they leak internally I will refund upon video of them leaking within 30 days. Don't come to me a year from now claiming they leak. There are no visible cracks and out of dozens of these I've sold over the years I've only had a couple that leaked. There is some external corrosion that can be repolished out. I can ship these and will quote shipping on case by case basis depending on destination. Send me a DM

 

[Rexone]

Velocity Stacks. Spun Aluminum, Polished. Available in tall and short for standard Holley 5 1/8" and also now for Holley 4500 Dominators, 7 1/4"
Std Holley talls and shorts are $79 ea
Dominators are $109 ea
In stock ready to ship!