Rex Marine Garage Sale

[Rexone]

Rex Marine is going through some changes. I am downsizing, getting rid of a lot of product lines that I classify as accessories, and engine parts. For 2015 going back to the core products, billet stuff, fabricated stuff primarily.

So as a result in the coming days and weeks a lot of great deals will be listed here and on ebay. Most of the above accessory and engine parts will be sold at cost and in some cases below cost.

 

[Rexone]

Marine Hardware Underwater Light Water Jacketed Assy, Stainless, Halogen 50W - These are the real deal, they are bright.

Designed for Fiberglass or Metal Hulls
Cast 316 Stainless steel body, nut, and polished lens cap ring
2 1/4" x 6.5mm thick borosilicate glass
50 Watt Halogen, 1100 Lumens
3 1/8" OD on body
4 3/4" Overall Length
3 1/2" Threaded Length
5 pounds
Part number SSUL 21000, code 456800

These lights are engineered for safety with water jacket thermal dissipation and an internal over-temperature shutoff switch to ensure that neither the light nor surrounding objects will ever overheat. The light is manufactured out of 316 stainless steel, with a brightly polished exterior ring. The assembly installs in the same manner as a regular thru hull fitting. Design features include wrench flats on the lens cap for easy tightening and a cast-in grounding lug on the body.

Normal Price on this light is $299

Sale price on these is $119.00 ea. 2 only, no rainchecks.

All sales are final on inventory sale items. Tax (to CA destinations) and shipping (actual shipping charges via UPS) will be added to all orders. Orders to outside of CA do not have sales tax added.

 

[Rexone]

Gale Banks marine small intercooler housing, polished aluminum excellent used - This is a rare part long discontinued by Gale Banks. It is the housing only as pictured. Does not include intercooler core or end plate. This housing was used on the lower HP turbocharged marine engines by Gale Banks in the 1970's and 80's.

$150

 

[Rexone]

I have overstock galore. Please help and buy some of these.

Offer#1

This is a NEW Rex Marine Unpolished Big Block Chevy Flywheel Cover typically used in a v-drive boat. This Flywheel Cover / Bellhousing is reinforced around the hole (thicker) for more meat to bolt a driveline guard flange to. Other than that it is similar in design to the Stellings type cover.

We are simply overstocked on these and letting some go very cheap. Normally we sell these unpolished for $155. Today they are $110 each until I get to a level I'm comfortable with on stock.

Offer#2

This is a NEW Rex Marine Polished, Factory Second Big Block Chevy Flywheel Cover typically used in a v-drive boat. This Flywheel Cover / Bellhousing is reinforced around the hole (thicker) for more meat to bolt a driveline guard flange to. Other than that it is similar in design to the Stellings type cover.

Sometimes we get a casting that has more porosity in it that we like in our polished finish. We set these aside and sell them at a discount in the off-season. These are those covers. They are not bad, just more pitting than we like to see in our first line product. They are fully functional and not deficient in any way other than cosmetic. Many companies sell this finish as first line product. We don't. In-season we sell our first line covers for $180 ea. We are offering these seconds at $130 each. Photo below is typical photo of a "first line" bellhousing. These here will have a few pits in them, not bad, but not smooth like we like!

 

[Rexone]

$125

1350 Spicer driveline for Vdrive boat, measures 34 1/4" collapsed length, travel is about 2 inches. Used driveshaft appears in good used condition.

 

[Rexone]

$200

A Pair of rare Nicson Racing Fins, considered vintage have not been made over 20 years. One has a bent tip that can be easily straightened with a little heat and a hammer. These are designed for a flat bottom boat.

These fins are made of manganeze bronze.

 

[Rexone]

$550

This is an Ace Champion V-drive in excellent used condition. Gears are 4% overdriven. Shafts turn freely and smoothly. I have not opened this box up for inspection. It is a used vdrive and as with all used parts this sale is "as is" with no warranty expressed or implied. There is no indication this box has any problems and it came from a reputable source. Vdrive includes a 1310 Spicer flange on the input shaft and a square pattern flange on the output shaft that will mate to a prop shaft flange (not included) as pictured.These drives are typically used in conjunction with separate transmissions as they have no in and out capability. Box weighs approx 85 lbs.

Ace Champion V-Drives were very common in the 1960's and 1970's in daycruiser and heavier style boats, particularly Spectras among others. They are well-known as a very "quiet and strong" operating V-Drive with large, wide gears.

New comparable heavy-class v-drives such as the Casale C-500 cost in the $3000-$4000 range new.

 

[Rexone]

$149.97

Auto Meter Marine 3 3/8 8000 RPM Tach - I know I have one, may have additional.

These Tachs were specially calibrated for use with Viper Motors

Condition - New in Box
Overstock Sale
All sales are final

 

[Rexone]

$150

Glenwood Bronze Rudder with 1" steel shaft (new old stock)
Cast Manganese Bronze Rudder. Semi Wedge Rudder design with blade and shaft cast in one piece.

This rudder has been sitting around on the shelf for ages and has no wear on the shaft surface, (new old stock).

Blade size is 6 1/2" x 12"
Shaft size is 1" dia with keyway.

Retail at Glenwood is $345

 

[Rexone]

$49

GLM Boat Water Pump for Merc/OMC/Volvo 5.0, 5.0L, 305, 5.7, 5.7L, 5.7LX, 350

? Condition - New in Box
? Overstock Sale
? All sales are final

 

[Rexone]

$290

Large Glenwood Marine Exhaust Snail Risers for Log Manifolds.

Hose size is 2 7/8" but the step can be cut off for more flow and use of 3 1/2" hose.

These are freshly polished and look like brand new.

Water must be used flowing through these risers. They are not for automotive use.

A new set similar to these is in the $700 range today from Glenwood.

 

[Rexone]

$75

2" diameter Marine Oil Cooler - Heat Exchanger

This cooler is in good "used" condition.

 

[Rexone]

$290

Large Harman Marine Exhaust Snail Risers for Log Manifolds.

Hose size is 2 7/8" but the step can be cut off for more flow and use of 3 1/2" hose.

These are freshly polished and look like brand new.

Water must be used flowing through these risers. They are not for automotive use.

A new set similar to these is in the $700 range today from Glenwood.

 

[Rexone]

$69 I have 2 of these.

This is a brand new casting made by Hanly Mfg for the Neovane V-105 cam driven marine water pump. Neovane pumps have been out of production for decades. These castings are virtually non-existant. The casting is bronze. It has one 3/4 NPT threaded inlet and (2) 1/2" NPT threaded outlets. It bolts on to the pump housing and seals with o-rings (not included). What you see is what you get. The V-105 Neovane pump was the larger and less common model pump. It can be identified by the cover being held on with 2 retainer pins, one on each side.

This casting will not fit the smaller V-755 and V-505 pump models. They are identified easily by the covers being held on with several screws around the perimeter.

 

[Rexone]

$100

Nicson Aluminum Top Rudder Bracket, offset rudder
These Nicson Brackets are no longer made and are considered vintage. This one is in excellent used condition.

 

[Rexone]

$195

Good condition used 10 degree Nicson Strut. Nicson parts have not been made for over 20 years and are considered vintage. This is designed for a flat bottom boat.

Made out of manganeze bronze.

 

[Rexone]

$90

Good condition used 10 degree Nicson Shaft Long with water dump fitting. Nicson parts have not been made for over 20 years and are considered vintage. This is designed for a flat bottom boat.

Made out of manganeze bronze.

 

[Rexone]

$89

This is a good "used" Weiand 7133 Timing Cover for 396-454 Big Block Chevy Mark 4 engine. It has cam drive provision drilled for 3 bolt fuel injection pump. These can easily be converted to 4 bolt marine water pumps with a little machining.

 

[Rexone]

$350

13x 13 Left Hand 3 Blade Steel Hi Performance Propeller for 1 1/8 shaft. Refurbished and in good condition. Don't know the manufacturer on this one.

 

[Rexone]

$385

3" diameter New Dual Chamber Marine Oil Cooler - Heat Exchanger

New 3" diameter by 14" long core. Overall length is 18". 1" NPT on ends for water, 3/4" NPT on side for engine oil and 3/8" NPT on side for power steering. Bundles are brazed copper tube sheets. Header, side plate, and bundle are 100% Cu/Ni (cupronickel) construction and has drain and pencil zinc.

 

[Rexone]

$295

3" diameter New Chrome Marine Oil Cooler - Heat Exchanger

New 3" diameter by 12" long core. Overall length is 15 1/2". 1" NPT on ends for water and 3/4" NPT on side for engine oil. Bundles are brazed copper tube sheets. Header, side plate, and bundle are 100% Cu/Ni (cupronickel) construction and has drain.

 

[Rexone]

$150


New Stainless Steel Fabricated Bolt-On Fin for flatbottom boat.

Base is 13" x 2 1/2"
Fin is 4 1/2" deep
10 bolt holes for 1/4" bolts

 

[Rexone]

$100

Replacement AC boat fuel pump for 302 & 351 Ford
Merc 62092 and 92092T
OMC 982063
New in box

 

[Rexone]

$45.97 ea - Lot of 3 seals - Free shipping lower 48 by Priority Mail

Have 3 left:
Mr. Gasket Rear Main Seal for Big Block Chevy 396-454 #1969, 1965-1990 Mark 4 style engines. 2 piece rubber, Teflon-Silicone
? Condition - New in Package

 

[Rexone]

$9.99 ea

Have at least 4 of these possibly more:

Fulton Battery Operated Clamp-On Bowlite #52-P
Coast Guard Approved Portable Bow Light

 

[Rexone]

ok as said up top all engine parts are being liquidated out. This includes the following Stef's Pro Oil Pans.

• 100% fabricated steel including thick pan rails
• Will fit stroke up to 4.750"
• Includes pickup for Mellings 10770 high volume pump
• Includes bolts and dipstick
• Internal directional windage screen and scraper
• kickout side
• unpainted, unplated raw steel finish

Selling at cost here - Listings on ebay will be higher to cover fees.
FOB San Dimas CA. I will quote freight per your inquiry. Frt will be UPS ground including insurance. Sales tax will be added for all CA shipments

A couple pictures are posted below. I will photo all the pans as soon as time permits but this construction is typical of any of the pans listed here. For now this is the list.

Quan Pt# Desc Eng Series Price ea.

3) 2921 10 qt jet MK 4 $550.00 each
1) 2921-14 14 qt Jet MK 4 $620.00 each
2) 2922 10 qt jet 5-6 $550.00 each
3) 2941 10 qt vd MK 4 $639.00 each
2) 2941-14 14 qt vd MK 4 $699.00 each
3) 2942 10 qt vd 5-6 $639.00 each
1) 2926 14 at os MK 4 $710.00 each
1) 2927 14 qt os 5-6 $710.00 each

 

[Rexone]

These pics are of the following pan:

1) 2927 14 qt Stefs Offshore Gen 5-6 $710.00

• 100% fabricated steel including thick pan rails
• Will fit stroke up to 4.750"
• Includes pickup for Mellings 10770 high volume pump
• Includes bolts and dipstick
• Internal directional windage screen and scraper
• kickout side
• unpainted, unplated raw steel finish

 

[Rexone]

This is the following pan:

2) 2941-14 14 qt vdrive MK 4, $699.00 each (these are flywheel to front of boat, drag style).

• 100% fabricated steel including thick pan rails
• Will fit stroke up to 4.750"
• Includes pickup for Mellings 10770 high volume pump
• Includes bolts and dipstick
• Internal directional windage screen and scraper
• kickout side
• unpainted, unplated raw steel finish

 

[BHC Vic]

How do I order a bow light? Thinking about those tool boxes too

 

[Rexone]

edit . top box only now $200, others are sold

 

[Rexone]

This is the following pan:

3) 2921 10 qt jet MK 4 $550.00 each (front of engine to front of boat)
2) 2922 10 qt jet 5-6 $550.00 each (photo is of the Mk4 pan, only diff being the end seal areas of the pan)

• 100% fabricated steel including thick pan rails
• Will fit stroke up to 4.750"
• Includes pickup for Mellings 10770 high volume pump
• Includes bolts and dipstick
• Internal directional windage screen and scraper
• kickout side
• unpainted, unplated raw steel finish

 

[Rexone]

This is the following pan:

1) 2921-14 14 qt Jet MK 4 $620.00 (front of engine to front of boat)

• 100% fabricated steel including thick pan rails
• Will fit stroke up to 4.750"
• Includes pickup for Mellings 10770 high volume pump
• Includes bolts and dipstick
• Internal directional windage screen and scraper
• kickout side
• unpainted, unplated raw steel finish

 

[Rexone]

3) 2941 10 qt vd MK 4 $639.00 each (front of engine to rear of boat)
3) 2942 10 qt vd 5-6 $639.00 each (MK4 is pictured, Gen 5-6 only diff is pan seal areas at ends)

• 100% fabricated steel including thick pan rails
• Will fit stroke up to 4.750"
• Includes pickup for Mellings 10770 high volume pump
• Includes bolts and dipstick
• Internal directional windage screen and scraper
• kickout side
• unpainted, unplated raw steel finish

 

[Rexone]

1) 2926 14 at offshore MK 4 $710.00 each