RDP LED Offroad Light Hook Up

[Hammer]

I think he is referring to the mount centerline.

 

[BigMike]

Not sure I understand what you mean by center of mount to center of mount?

Take a picture of your existing setup.

RD

I just got home from the river yesterday, so I can't take a picture of the existing set up. But in the picture below, the measurement that I am looking for is the bottom one, the one that is 34 3/4". Thanks.

 

[Clearmax]

I just got home from the river yesterday, so I can't take a picture of the existing set up. But in the picture below, the measurement that I am looking for is the bottom one, the one that is 34 3/4". Thanks. View attachment 516258

These measure the same 34 3/4". Thanks

 

[240Hallett]

Could the feet of the brackets be mounted inboard instead of outboard to narrow the overall width if needed?

 

[RiverDave]

Could the feet of the brackets be mounted inboard instead of outboard to narrow the overall width if needed?

it would be easier to just make or buy a different bracket.

 

[240Hallett]

it would be easier to just make or buy a different bracket.

Couldn't just turn em around?

 

[RiverDave]

Couldn't just turn em around?

I don't have the parts in front of me but I would be inclined to say no.

 

[BigMike]

These measure the same 34 3/4". Thanks

The light bar on my truck came with mounts that have the little ridges on both sides so you can have the feet going either in or out and still lock into place so it doesn't rotate and stays where it should. Do your mounts have the ridges on both sides or just the one?

 

[Clearmax]

Couldn't just turn em around?

Yes you can turn them around

 

[BigMike]

Yes you can turn them around

So, if you turn them around, what would be the dimensions?

 

[RiverDave]

I just got home from the river yesterday, so I can't take a picture of the existing set up. But in the picture below, the measurement that I am looking for is the bottom one, the one that is 34 3/4". Thanks. View attachment 516258

So, if you turn them around, what would be the dimensions?

Do you mind if I ask where that question came from?

Unfortunately from that drawing there is no way to deduct that other than measuring them in person. I"m assuming you are looking at a second light for another application or something?

RD

RD

 

[BigMike]

Do you mind if I ask where that question came from?

Unfortunately from that drawing there is no way to deduct that other than measuring them in person. I"m assuming you are looking at a second light for another application or something?

RD

RD

No, asking for the same application. The picture that I put up was just to clear up the "mount to mount" dimension that I was asking for. That question was answered with the dimension of the light bar that this thread is about measures the same as the picture that I posted. So my second question was, can you turn the mounts around? And if so, what would the new distance be? If the distance is 34.25" from mount to mount with the "feet" of the mounts facing out, if you turn the mounts around and have the "feet" face in, what would be the new distance? Sorry if I'm being confusing and I appreciate the help and answers if possible.

 

[BigMike]

For example, here is a picture from a different manufacturer showing how the mounts on the side can be attached facing either in or out and my question was can the mounts that come with your light bar do this and if so, instead of measuring 34.25", what would be the distance? :

 

[RiverDave]

I'll let robert answer that.. but it looks like a similar lightbar and the same feet.

The big difference again is the electronics they put inside of them for the "brightness" of the lightbar. If they have a dimension I'd bet it would be the same, and if it isn't, I'm sure Robert will take care of you on a refund or exchange.

RD

 

[Flying_Lavey]

For example, here is a picture from a different manufacturer showing how the mounts on the side can be attached facing either in or out and my question was can the mounts that come with your light bar do this and if so, instead of measuring 34.25", what would be the distance? : View attachment 516476

Looks like a fun job to get to the fasteners on the "feet" when installed facing inward. Lol!

 

[240Hallett]

Looks like a fun job to get to the fasteners on the "feet" when installed facing inward. Lol!

Looks like you could face the light down and have enough clearance to fasten the feet and then do your final adjustment facing forward.

 

[Caydens Cat]

Any chance the smaller radius lightbar fits in the lower valance of 2007-2015 gmc trucks (e.g. Yukon)?

 

[boatnam2]

Dumb question Im sure but the best way to order is online or call?

 

[Clearmax]

Dumb question Im sure but the best way to order is online or call?

Please call since online will be much more. Thanks

 

[Clearmax]

Any chance the smaller radius lightbar fits in the lower valance of 2007-2015 gmc trucks (e.g. Yukon)?

We have a 20" radius that should fit. We have one left in stock

 

[boatnam2]

Please call since online will be much more. Thanks

thanks.

 

[Caydens Cat]

We have a 20" radius that should fit. We have one left in stock

I think it's a 28" spread, I'll give it a try. Please PM me your info to ship to SD. Will be used as a "desert" high beam when traveling.

Thanks
JT

 

[cicchetti_24]

3x3 pod 20W Osram LED Spot $29.95pc 100pc in stock
6" LED Light Bar Osram LED $34.95 100pc in stock
12" LED Light Bar Osram LED $44.95 60pc in stock
20" LED Light Bar Osram LED $59.95 60pc in stock
30" LED Light Bar Osram LED $109.95 100pc in stock
40" LED Light Bar Osram LED $119.95 30pc in stock
50" LED Light Bar Osram LED $139.95 15pc in stock
30" Radius LED Light Bar Osram LED $129.95 140pc in stock
40" Radius LED Light Bar Osram LED $139.95 40pc in stock

View attachment 515149 View attachment 515148

View attachment 515150




Call 909-394-2301 and ask for Tyler or Robert



These are the same Light bars I have on the front and rear of my Ranger and they are the legit Bright as F*&K ones..

Thanks for this! I wanted to buy some for the 2500. I'm not doing one on the roof. But behind the grill and one for the reverse would be great like a 6 inch above my hitch and a 20 inch behind the grill.

 

[Bobby V]

Bump

 

[Howardflat]

Do the 3" ones come with a single bolt bracket?

 

[RiverDave]

he's on the road out here right now so he won't be able to answer until tomorrow. he is bringing some lightbars etc that we will be selling out of the rdp booth at the sand and water expo this weekebd

 

[petie6464]

I picked up one of these 20" Light Bars after two attempts trying the "Amazon specials" of which the first one lasted about 5 minutes and the second about 15 mins. no joke!

These lights are NOTHING like that junk, They are heavier (Bigger Housing and heat sink) have a positive power cable feed seal that is some type of compression fitting and appear to have an atmospheric vent as well.

Bottom line these are some good lights, I have had it through the rain storms we have had recently and zero sign of condensation.

They are bright of course, the 20" light on the front of a full size truck puts out an impressive amount of light for its size.

Going to a 50" from them, I would highly recommend these!:thumbsup

 

[fishing fool]

Any chance of a 54"??

 

[RiverDave]

You would have to call them at the shop. I am not sure what they have in stock right now. I do know Robert got some new style light bars in that are very cool looking

 

[BarryMac]

30" and 40" single row?

 

[TrojanDan]

30" and 40" single row?

I stopped in and bought a couple of LED dome lights today on my way to Havasu. Tyler showed me the 20" and 30" single rows in stock. They look pretty well made with wiring harness/relay/switch. He said he doesn't come on here much so I would call him. :cool

 

[SHOCKtheMONKEY]

Edit, safeglowhips.com I'm guessing...

Has anyone purchased from there recently?

Thanks!

 

[CantComplain]

Will you guys be set up at the boat show? Need to pick up a couple pods and a bar.

 

[Jefftowz]

Bump, If this is the right thread??

 

[E4L]

I bought a 50 awhile ago and it has never been out of the box could I possibly exchange it for a 40?

 

[havasubum]

Is this deal still available?

 

[E4L]

Spoke with these guys they said they will be at the sand show in havasu and they will have inventory back in stock next month.

 

[Jmp]

Any updates on these light bars? When will they be available again?

 

[E4L]

Any updates on these light bars? When will they be available again?

Read above post

 

[E4L]

Any word on the inventory updated


Sent from my iPhone using Tapatalk

 

[Tinkerer]

I am lookig for a single row 30 inch spotlight version. Is there one available?

 

[COCA COLA COWBOY]

Is this still active?

 

[Eliminator21vdrive]

Are these still available?