Price this 20' Schiada V-drive

[rivergames]

My brother bought this boat in Feb of this year.

After reblumbing 90% of the entire boat and fixing wiring issues, The motor hydrolocked 2 cylinders and he found a 16" crecent wrench laying in the valley of the blower motor.

We also notice the rear passanger side stringer had rotted wood. We ground the wood out and filled it with chopped glass and laid a few layers or glass over it.

After tearing the motor down and sending it to the machine shop, it is junk. He plans on selling the blower, carbs, intake to recoupe some money.

All he wants is a reliable boat that starts up every time and will get him where he needs to go. Like a hallet 210 or similar.

What would you figure the boat is worth, with trailer and dust cover? Minus motor.

 

[Outdrive1]

500 bucks at the most. Where can I pick it up??

 

[rivergames]

500 bucks at the most. Where can I pick it up??

No need to drive. I can ship the oil pan to you. Thanks I will let him know :thumbup:

 

[Outdrive1]

No need to drive. I can ship the oil pan to you. Thanks I will let him know :thumbup:

Lol.

 

[Hammer]

So the hull is fixed and ready to go ? It's painted correct ?

 

[Outdrive1]

Is the floor solid and are the stringers solid?

 

[Outdrive1]

I sold mine for 4500 I think. I just about broke even on it. Lol.

 

[rivergames]

So the hull is fixed and ready to go ? It's painted correct ?

I'm gonna tell him to get off his ass and go get some better pics

 

[rivergames]

I sold mine for 4500 I think. I just about broke even on it. Lol.

That's about what wackers, jets, and OD's go for these days.

Now, lets talk about the holy grail of Schiada boats... The 20' SS V-drive. The #1 boat that pulls more tail than any other boat on the water. That is an added few $G's right there

 

[460]

That's about what wackers, jets, and OD's go for these days.

Now, lets talk about the holy grail of Schiada boats... The 20' SS V-drive. The #1 boat that pulls more tail than any other boat on the water. That is an added few $G's right there

Sure if they run. But with out a motor then only it's worthy of pulling is 3 Indians from Parker and hammer.

 

[djunkie]

My brother bought this boat in Feb of this year.

After reblumbing 90% of the entire boat and fixing wiring issues, The motor hydrolocked 2 cylinders and he found a 16" crecent wrench laying in the valley of the blower motor.

We also notice the rear passanger side stringer had rotted wood. We ground the wood out and filled it with chopped glass and laid a few layers or glass over it.

After tearing the motor down and sending it to the machine shop, it is junk. He plans on selling the blower, carbs, intake to recoupe some money.

All he wants is a reliable boat that starts up every time and will get him where he needs to go. Like a hallet 210 or similar.

What would you figure the boat is worth, with trailer and dust cover? Minus motor.

Fuck that sucks. A buddy of mine had a similar experience with his 21' that he bought years ago. Had to go through everything. Mix matched pistons etc.


Sent from my iPad using Tap That Ass

 

[rivergames]

Sure if they run. But with out a motor then only it's worthy of pulling is 3 Indians from Parker and hammer.

Tough decision... Indians or Hammer

 

[rivergames]

Fuck that sucks. A buddy of mine had a similar experience with his 21' that he bought years ago. Had to go through everything. Mix matched pistons etc.


Sent from my iPad using Tap That Ass

Yup. He is pretty bummed out about the deal

 

[cofooter]

Tough decision... Indians or Hammer

I think the Indians drink more........

 

[Outdrive1]

I think the Indians drink more........

Than Hammer???

 

[DtB]

6-8k

 

[460]

I think the Indians drink more and don't pass out like a bitch........

Fixed it for you

 

[Hammer]

Tough decision... Indians or Hammer

Personally I'd go for the Indians....

 

[redone76]

Id be very interested in this with some more pics and a decent price. Ive got an engine just itching to be put into it...

 

[Hammer]

Fixed it for you

Shouldn't you be folding your pink his and her bath towels ?

 

[460]

Shouldn't you be folding your pink his and her bath towels ?

I'm working like a normal person. Something you don't know nothing about.

 

[rivergames]

More pics

 

[rivergames]

We chopped the wiring to the motor because he was planning on getting it rewired with a rebuilt motor. Come to find out the block, pistons, rods, etc are all junk. It would cost too much money to build up a new motor for this thing.

The boat will come with the tranny and IMCO exhaust. The only item it will not come with is the motor/blower

It has electric cav plates

 

[Outdrive1]

I'm working like a normal person. Something you don't know nothing about.

Hater.

 

[460]

Hater.

Hater. Noted.

You want in on this one too?

 

[rivergames]

I'm thinking around $10K for it

Throw a N/A motor in it, complete the wiring around the motor, hook up the plumbing, fix the rear corners and run the piss out of her

 

[Outdrive1]

I'm thinking around $10K for it

With everything minus motor, that's a pretty good price.

 

[Hammer]

I'm working like a normal person. Something you don't know nothing about.

I did your job once, I'd hardly call that work.

 

[Hammer]

With everything minus motor, that's pretty a pretty good price.

X2

 

[rivergames]

If someone has a nice clean 21-23' v-hull outdrive that want to trade for a v-drive, he is willing to trade and add a little cash to the pot.

 

[460]

I did your job once, I'd hardly call that work.

Selling chrome wiper blades and seat covers isn't work.

I did your job also once. Wait, just kidding I have never been a bum.

 

[025]

Did I read that correct? A 16" crescent wrench in the lifter valley? Blower bolted down and forgotten about?

 

[rivergames]

Did I read that correct? A 16" crescent wrench in the lifter valley? Blower bolted down and forgotten about?

I was waiting for someone to say something. YES! You could only imagine the look on our faces when we pulled the intake off :eek

 

[CampbellCarl]

I'm interested...............how much.................for the crescent wrench?

 

[djunkie]

I was waiting for someone to say something. YES! You could only imagine the look on our faces when we pulled the intake off :eek

Strange way to keep an adjustable wrench oiled up.


Sent from my iPad using Tap That Ass

 

[djunkie]

I'm interested...............how much.................for the crescent wrench?

$10k and it comes with a boat. :thumbup:


Sent from my iPad using Tap That Ass

 

[Outdrive1]

Strange way to keep an adjustable wrench oiled up.


Sent from my iPad using Tap That Ass

You should always carry a couple of tools on board your boat. RD carries a Hammer.

 

[djunkie]

You should always carry a couple of tools on board your boat.

I wonder if there was a roll of duct tape in the oil pan?


Sent from my iPad using Tap That Ass

 

[rivergames]

...

 

[rivrrts429]

Where's the boat?

Any pics of the bottom?

 

[rivergames]

Where's the boat?

Any pics of the bottom?

At our shop in Gardena, CA

 

[Riverbound]

Nice boat. Wish I had the time to take on a project would love to have it.

Sorry to hear about his experience.

 

[rivergames]

Nice boat. Wish I had the time to take on a project would love to have it.

Sorry to hear about his experience.

Yup. He is taking a beating on this one. Now I gotta help him find a nice reliable river boat

 

[Hammer]

Selling chrome wiper blades and seat covers isn't work.

I did your job also once. Wait, just kidding I have never been a bum.

Ha ! My store was top in sales while I was there. Sold the shit out of anti-seize !

 

[460]

Ha ! My store was top in sales while I was there. Sold the shit out of anti-seize !

I rest my cAse.

 

[rivergames]

Hammer has a motor and 460 has a boat to sell. Hmmmm.... I see a partnership in the near future.:thumbup::skull

 

[Riverbound]

Yup. He is taking a beating on this one. Now I gotta help him find a nice reliable river boat

Why not just have someone rebuild the motor and keep the boat. At least he knows the demons in this one versus getting something else that is unknown.

 

[rivergames]

Why not just have someone rebuild the motor and keep the boat. At least he knows the demons in this one versus getting something else that is unknown.

Block, crank, cam, pistons, rods, lifters, push rods, valve springers, machine work, the time it is going to take..... He just wants to sell it and look for a reliable outdrive that backs up where he points the wheel. He is bummed about this boat and doesn't even want to look at it anymore. lol

 

[Riverbound]

Block, crank, cam, pistons, rods, lifters, push rods, valve springers, machine work, the time it is going to take..... He just wants to sell it and look for a reliable outdrive that backs up where he points the wheel. He is bummed about this boat and doesn't even want to look at it anymore. lol

Gotcha. It's like when you know it's time to dump a chick

 

[CampbellCarl]

Trying my best to not be a dick here .......but is the paint/gel at the rear corners a tad bit less than most Schiada owners would tolerate?

Looks a little rough there..