One of you 10' Schiada guys needs to sac up...lol

[Cole Trickle]

Looks pretty exciting with 300+ hp:skull

[video=youtube;PrPDrN2JRY4]http://www.youtube.com/watch?v=PrPDrN2JRY4[/video]

 

[Tom Brown]

I'll bet that thing is almost as fast as it would be with an OMC Stinger 65 outboard on it.

 

[Cole Trickle]

I'll bet that thing is almost as fast as it would be with an OMC Stinger 65 outboard on it.

They said 85mph gps thus far....

I don't think the OB would roll onto plane and acccelerate as fast. Be a crap load easier and cheaper though..lol

Ride was a little sketchy before the tabs and bottom work

 

[Cole Trickle]

I remember that guy. He borrowed a hull and made a mold of the bottom. Then built the boat from scratch.
Something about PWC's being outlawed in his country so he cut the engine and drive out of his PWC and built that.

Not sure what PWC comes with a rotax?

Addind a turbo on top = good times.

Neat little deal and the work looks outstanding

 

[Tom Brown]

They said 85mph gps thus far....

Extremely unlikely.

 

[Guest]

Not sure what PWC comes with a rotax?

SeaDoo

 

[RiverDave]

He goes by Pron, or Tron or something? JBB posted a link to the build years ago. It was a link to a PWC forum and was 100+ pages long. I sat down one day and read every bit of it.

The guy has mad skills.. Everything from the hull, to machining, etc.. He did all himself.

RD

 

[Scott E]

Pretty cool...

 

[Ryphraph]

it looks like he is running it in the Pinochio ride lake at Disneyland...

Ryph

 

[Tank]

That thing is sweet! I'd rock that ish....Looks to have a MEAN chine walk though when it gets going fast.

 

[Trond]

Just stumbled over this one...

Hi guys

It's quiet normal to doubt a 11ft boat going over 80mh... im used to people saying "no way"!!

For those who still havent seen the latest movie:

YouTube - Jetling 335 Danger Zone

Trond

 

[Trond]

By the way... the engine is from a Seadoo Rxp jetski.

 

[Phebus]

It would be like taking a midget to the prom...................

 

[cave]

Son of a beach that little jet is faster than most of the I/Os and jets too up in here :fingers:

I see some sitdown skies cruising at 70 trying to get under my Jet spray. Crazy fast for no cage. Can you say instant enema?

 

[Trond]

I have am nowhere near the full potentiale of this boat yet... This season Im aiming for 86mph with passenger. Should be 2-3mph faster if im alone:skull

 

[RiverDave]

I have am nowhere near the full potentiale of this boat yet... This season Im aiming for 86mph with passenger. Should be 2-3mph faster if im alone:skull

You have balls that clank Trond.. LOL.. Love the boat.. If you ever bring it to the states on exhibition I'd like to check it out.

RD

 

[RitcheyRch]

That boat is bad ass thats for sure.

 

[PolarBearKing]

I wonder how big the fuel cell is??? Probably can only make one pass before heading back to the fuel dock.

Still, pretty sweet... :thumbsup

 

[TomD]

Looks to need a little balancing to rid the pourpose issue. Perhaps a little wider pad? Still impressive. There's a guy here on the east coast with a Water Mouse with a 260 powerhead in it doing about 80 or so.

 

[Riverbound]

He goes by Pron, or Tron or something? JBB posted a link to the build years ago. It was a link to a PWC forum and was 100+ pages long. I sat down one day and read every bit of it.

The guy has mad skills.. Everything from the hull, to machining, etc.. He did all himself.

RD

I read that thread too...alot of old school engineering. make a changeand put it in the water.

 

[Trond]

The fuelcell is devied in to three fuelcells. One on each side and one catch-tank in the middle. It holds about 17gallons of fuel... which should be enough for a few passes The porposing is depending on what speed, trim and fuel level im at. i can trim away all the porposing at all speed with no problem.

I would like to see that mouse-boat tho!!!

 

[2Driver]

Geez it sounded nice.

I was expecting to hear something like a jet ski, McClane tiff mower or 2ff's Rzr.

 

[Mini Kat]

Whats the button for that you keep pushing with your left thume?

 

[Roaddogg 4040]

The motor sounds awesome but I sure wish that they would wear better life jackets than the SOS blow up type... Good work guys!

Steve

 

[Trond]

The motor sounds awesome but I sure wish that they would wear better life jackets than the SOS blow up type... Good work guys!

Steve

Thanks man, and good advice!!
Can you recomand me a good life jacket which dont have padding in the back? Im sitting in a go-cart seat, so theres no room for anything in the back...

 

[Trond]

Whats the button for that you keep pushing with your left thume?

It's the tilt on the nozzle...

The buttons on the steering-wheel is: Tilt, ventilation-fan, gauges and set/mode-buttom for the seadoo display.

 

[Roaddogg 4040]

Thanks man, and good advice!!
Can you recomand me a good life jacket which dont have padding in the back? Im sitting in a go-cart seat, so theres no room for anything in the back...

I would recommend Lifeline Life Jackets in Parker Arizona 928-669-9241 I am sure that they could build anything that you would want.

Steve

 

[TomD]

The fuelcell is devied in to three fuelcells. One on each side and one catch-tank in the middle. It holds about 17gallons of fuel... which should be enough for a few passes The porposing is depending on what speed, trim and fuel level im at. i can trim away all the porposing at all speed with no problem.

I would like to see that mouse-boat tho!!!

Here ya go!!!

 

[Trond]

Holy Fukk!!!

What is that thing?
More photos and spec please??

 

[TomD]

Only pics I got. I believe it's called a Water Mouse. I'm not sure who made it. I think it was Mercury but I'm not sure. Originally had a 4 cylinder I think. They put a 260HP outboard powerhead in it. It is jet drive also. That's all I know about it.

 

[Mini Kat]

It's the tilt on the nozzle...

The buttons on the steering-wheel is: Tilt, ventilation-fan, gauges and set/mode-buttom for the seadoo display.

Nice THANKS:thumbsup