NEEDED FIBERGLASS BUCKET SEAT SHELLS!

[REVENGE 97]

I'm looking for 2 fiberglass seat shells for a Flatbottom ? any ideas?

 

[Sharp Shooter]

I'm looking for 2 fiberglass seat shells for a Flatbottom ? any ideas?

Hit up @Clank123

 

[bonesfab]

MSR performance was doing them I believe.

 

[WavetoWave]

What style? Do you want a low back small bucket? Or a more bolstered medium bucket 26" to 30" back? What budget do you have in mind?

 

[REVENGE 97]

What style? Do you want a low back small bucket? Or a more bolstered medium bucket 26" to 30" back? What budget do you have in mind?

Yes low back, approx 22" wide?

 

[MonkeyButt70]

I have these new low backs in black.

 

[REVENGE 97]

What style? Do you want a low back small bucket? Or a more bolstered medium bucket 26" to 30" back? What budget do you have in mind?

Low back, approx 22" wide

 

[REVENGE 97]

I have these new low backs in black.

View attachment 1387502

Overall width?? Please at widest point

 

[MonkeyButt70]

Overall width?? Please at widest point

I think too small for your needs, 17.5"

 

[REVENGE 97]

I think too small for your needs, 17.5"

Ya I had two off those covered and can't even get my ass in them....LOL, I want to sell those and do another wider pair

 

[Sharp Shooter]

Clank modified mine to fit me before they were covered. These are traditional style non pinch old school circle boat seats. I cut down the lower cushion later to sit lower. I felt more secure in the boat and it gave me better pedal leverage. A lot of guys remove the bottom cushion altogether.

 

[REVENGE 97]

MSR performance was doing them I bel

Clank modified mine to fit me before they were covered. These are traditional style non pinch old school circle boat seats. I cut down the lower cushion later to sit lower. I felt more secure in the boat and it gave me better pedal leverage. A lot of guys remove the bottom cushion altogether.

View attachment 1387515

Yes that is more what I'm looking for, who covered them?

 

[Sharp Shooter]

Yes that is more what I'm looking for, who covered them?

Elegance Auto Interiors in Upland

 

[coolchange]

22” is huge. 19 is gettin up there.

First shell is the small drag bucket 17 1/2
Next is the wide one 19 1/2
Middle is 18 and what I size seats for an old school flat, larger jet boat, 19 v etc.
Next one is 20 and huge. Cruiser size.
Last square one is for a Shiada 20. It’s 22” wide and for 2” and 3” foam.
I was starting to make a mold for one similar to the center seat. Probably used most for mock up for building my seats

 

[REVENGE 97]

22” is huge. 19 is gettin up there.
View attachment 1387736
First shell is the small drag bucket 17 1/2
Next is the wide one 19 1/2
Middle is 18 and what I size seats for an old school flat, larger jet boat, 19 v etc.
Next one is 20 and huge. Cruiser size.
Last square one is for a Shiada 20. It’s 22” wide and for 2” and 3” foam.
I was starting to make a mold for one similar to the center seat. Probably used most for mock up for building my seats

Do you have 2 19" wide shells available?

 

[REVENGE 97]

Do you have 2 19" wide shells available?

19 1/2

 

[warpt71]

Ya I had two off those covered and can't even get my ass in them....LOL, I want to sell those and do another wider pair

Lets see what you have covered, might be able to find you a buyer

 

[coolchange]

Do you have 2 19" wide shells available?

No those are my mock up seats. Just wanted you to see the difference. At some point I hope to start making them though. Are you putting them in a Revenge? Pretty narrow, better check.

 

[jetboatperformance]

I make a dozen or so a month My 20"s are available in black or white gel , "Green" vacuum molded super strong and light weight (in stock) ready to ship (I also make 24's)

 

[Clank123]

Hey Revenge 97!
Thanks for reaching out.
Looks like some great options here on this thread!
The 19 1/2s will fit in your Revenge(solid or U joint driveline?).
Let me know if I can help in any way.

Also, I have a beautiful pair of 18 shells fully upholstered. The foam is a little thick on the sides.
Inside measurement is about 14 1/2 inches, so kinda tight for the bigger boys.
They are for sale if anyone is interested.
I’ll get hold of the owner and see what he paid for them.

 

[REVENGE 97]

No those are my mock up seats. Just wanted you to see the difference. At some point I hope to start making them though. Are you putting them in a Revenge? Pretty narrow, better check.

No a older Sanger bubble deck, pretty wide compared to most

 

[REVENGE 97]

Lets see what you have covered, might be able to find you a buyer

 

[REVENGE 97]

Hey Revenge 97!
Thanks for reaching out.
Looks like some great options here on this thread!
The 19 1/2s will fit in your Revenge(solid or U joint driveline?).
Let me know if I can help in any way.

Also, I have a beautiful pair of 18 shells fully upholstered. The foam is a little thick on the sides.
Inside measurement is about 14 1/2 inches, so kinda tight for the bigger boys.
They are for sale if anyone is interested.
I’ll get hold of the owner and see what he paid for them. View attachment 1388040
View attachment 1388041

Ya those are nice!