Need to have the wiring finshed on my Schiada

[rivergames]

The boat, in my eyes is 80% finished with the wiring. I won't mention the shop pretty much FUCKED me on that.

Most of the stuff appears to be hooked up, but the lights in the dash don't work, nav lights dont work and the stereo does not work :grumble:

Anyone have any recommendations that I can take the boat to get it fixed in the So Cal Area?

I just want someone that keeps their fucking word and gets it done right. Is that really so hard to ask?

 

[460]

That sucks dude. Fucking people these days

 

[rivergames]

That sucks dude. Fucking people these days

I'll tell you all about it when we sit down for beers at Fox's soon

 

[Racey]

The boat, in my eyes is 80% finished with the wiring. I won't mention the shop pretty much FUCKED me on that.

Most of the stuff appears to be hooked up, but the lights in the dash don't work, nav lights dont work and the stereo does not work :grumble:

Anyone have any recommendations that I can take the boat to get it fixed in the So Cal Area?

I just want someone that keeps their fucking word and gets it done right. Is that really so hard to ask?

That sucks man, too bad you aren't closer to mead :thumbsdown

There are so many fucked up wirer's out there, even in many of the "big name" shops (if you wanna call it that, shops that most people have heard of), their wiring is abhorent, which i don't get because it's not that difficult to wire 12vdc cleanly and properly. We've seen some efi engine harnesses come from certain shops that look like they were put together in a mexican trailer park, it's a surprise the engines even ran, and these were some big money motors, not cheesy bs.

 

[Wired4Sound]

bring it to me i can fix it all 951 696 2200 adam

 

[TBI]

Do it yourself pussy

 

[Marine Industries West]

I can finish it for you, BJ's Marine in Anaheim Ca 92806. Call Bob 714-630-3905

 

[rivergames]

bring it to me i can fix it all 951 696 2200 adam

Sorry Adam, but your shop screwed my dad and uncle over on their 27' Eliminator fun deck. They brought the boat down to you and the new system you installed sounded great, but the XM never worked. They kept callin you guys and one of you said you would fix it in parker as it was a minor issue. Multiple calls and nobody every came to fix it :thumbsdown

 

[rivergames]

Do it yourself pussy

I would if I had a day to fix it. Besides work, all my time is going into getting the new crackerbox ready for the first race of the season

 

[rivergames]

That sucks man, too bad you aren't closer to mead :thumbsdown

There are so many fucked up wirer's out there, even in many of the "big name" shops (if you wanna call it that, shops that most people have heard of), their wiring is abhorent, which i don't get because it's not that difficult to wire 12vdc cleanly and properly. We've seen some efi engine harnesses come from certain shops that look like they were put together in a mexican trailer park, it's a surprise the engines even ran, and these were some big money motors, not cheesy bs.

Wish I was closer too. I would have brought it too you so Racey Ind. could wire it for the second time and last another 20+ years :thumbsup:thumbsup:thumbsup

You would think the first shop I used would have gotten it right with the 2 Months it took them. But no, it's all jacked up

 

[milkmoney]

Wish I was closer too. I would have brought it too you so Racey Ind. could wire it for the second time and last another 20+ years :thumbsup:thumbsup:thumbsup

You would think the first shop I used would have gotten it right with the 2 Months it took them. But no, it's all jacked up

want to meet half way or something, if you really want racey to do it..?

 

[rivergames]

want to meet half way or something, if you really want racey to do it..?

Thanks Dave. Trust me, If I would have know what was going to happen with the boat, I would have taken it straight to his shop in the first place.

Unfortunately it is "almost done". Just needs to be corrected and cleaned up so I will just find someone around here to get it done.

 

[milkmoney]

Thanks Dave. Trust me, If I would have know what was going to happen with the boat, I would have taken it straight to his shop in the first place.

Unfortunately it is "almost done". Just needs to be corrected and cleaned up so I will just find someone around here to get it done.

no worries. gotcha...:thumbsup ....

 

[Outdrive1]

I wish I was closer I'd come over and give you a hand with it.

 

[rivergames]

I wish I was closer I'd come over and give you a hand with it.

Thanks bud. I'm gettin all jumpy because the water is going to warm up in a few months and my boat is STILL sittin on the trailer lol

 

[schiadastan]

The boat, in my eyes is 80% finished with the wiring. I won't mention the shop pretty much FUCKED me on that.

Most of the stuff appears to be hooked up, but the lights in the dash don't work, nav lights dont work and the stereo does not work :grumble:

Anyone have any recommendations that I can take the boat to get it fixed in the So Cal Area?

I just want someone that keeps their fucking word and gets it done right. Is that really so hard to ask?

You can always give us a call. I would be happy to help you out.
Stan
818-441-8555

 

[Hammer]

I can give you hand wiring that SOB...

 

[460]

Thanks bud. I'm gettin all jumpy because the water is going to warm up in a few months and my boat is STILL sittin on the trailer lol

It's a vdrive. It's the norm!

 

[rivergames]

It's a vdrive. It's the norm!

This boat saw more water in a year than the griz will see in 5 :skull

 

[TBI]

I would if I had a day to fix it. Besides work, all my time is going into getting the new crackerbox ready for the first race of the season

If excuses were zip ties....it would be done already

 

[460]

This boat saw more water in a year than the griz will see in 5 :skull

Mutha fucker you are crazy. The Griz is in the water and fully functional every weekend. It already has more water time this month then most will have this summer.

 

[rivergames]

Mutha fucker you are crazy. The Griz is in the water and fully functional every weekend. It already has more water time this month then most will have this summer.

I guess we will see whats up in a few months :cool

 

[Outdrive1]

Mutha fucker you are crazy. The Griz is in the water and fully functional every weekend. It already has more water time this month then most will have this summer.

You're welcome.

 

[rivergames]

I can give you hand wiring that SOB...

It's passed that point. I just want to drop it off and pick it up with everything complete and functional. I can't even stand to look at it because I just get pissed off and butthurt D

 

[460]

You're welcome.

Thanks.

Can you order the 6.5 version of those cxi's I need more speakers lol.

I guess we will see whats up in a few months :cool

O we shall.

I will have 3 river trips under my belt before you blink.

 

[milkmoney]

It's passed that point. I just want to drop it off and pick it up with everything complete and functional. I can't even stand to look at it because I just get pissed off and butthurt D

andrew,if you are still crying a week from now, i am gonna slap you in the head...we can do this sat. or sunday and have racey finish it...

forgot smileyface.

 

[rivergames]

andrew,if you are still crying a week from now, i am gonna slap you in the head...we can do this sat. or sunday and have racey finish it...

Just waiting on new CP Pistons so I can get the motor back together and in the boat. I'm trying to get everything lined up, so when the motor is back in the boat, I can take it straight over to get the wiring finished up.

 

[milkmoney]

Just waiting on new CP Pistons so I can get the motor back together and in the boat. I'm trying to get everything lined up, so when the motor is back in the boat, I can take it straight over to get the wiring finished up.

ok.wasnt sure at what stage...ok buy ya a beer at foxes..:thumbsup

 

[Hammer]

Just waiting on new CP Pistons so I can get the motor back together and in the boat. I'm trying to get everything lined up, so when the motor is back in the boat, I can take it straight over to get the wiring finished up.

When is the motor going to be In ?

 

[rivergames]

ok.wasnt sure at what stage...ok buy ya a beer at foxes..:thumbsup

Lookin forward to it :champagne:

 

[djunkie]

Mutha fucker you are crazy. The Griz is in the water and fully functional every weekend. It already has more water time this month then most will have this summer.

But it's still slow.

 

[BDMar]

We would be happy to get it finished for you.

 

[460]

But it's still slow.

Please don't.

I'm already away from the edge, I don't need to be brought back. I'm adding more speakers and that's it. That's it!!!

It's ok, it will be there to tow you in too.

 

[white tortilla]

my friend dustin at menace marine does some pretty nice wiring up in Valencia. id guess his prices are pretty competitive. hes got pictures on menace marine on facebook of some of the wiring hes done it looks pretty sano

 

[rivergames]

We would be happy to get it finished for you.

Thank you Brian. I got your PM earlier and I will be giving you a call

 

[J5Daytona]

That sucks man, too bad you aren't closer to mead :thumbsdown

There are so many fucked up wirer's out there, even in many of the "big name" shops (if you wanna call it that, shops that most people have heard of), their wiring is abhorent, which i don't get because it's not that difficult to wire 12vdc cleanly and properly. We've seen some efi engine harnesses come from certain shops that look like they were put together in a mexican trailer park, it's a surprise the engines even ran, and these were some big money motors, not cheesy bs.

I am in henderson and would like to find someone to re do the wiring under my instrument cluster and install new gauges and switches. Ive talked to a few people about getting it done but most of the shops in this town treat me as if they would be doing me a favor to actually do it. This is on an 89 sleekcraft enforcer if it sounds like something you could knock out could you PM me your contact info?

 

[Roaddogg 4040]

Hey Andrew, I can wire it for you. I just have a couple of questions. The battery has thos two things sticking up on the top. Does the wiring go to one of those or both? Also I have seen a few boats with a couple of different colors of wire in them I only use one color so just let me know what color you want...

Steve

 

[djunkie]

Hey Andrew, I can wire it for you. I just have a couple of questions. The battery has thos two things sticking up on the top. Does the wiring go to one of those or both? Also I have seen a few boats with a couple of different colors of wire in them I only use one color so just let me know what color you want...

Steve

 

[TBI]

Hey Andrew, I can wire it for you. I just have a couple of questions. The battery has thos two things sticking up on the top. Does the wiring go to one of those or both? Also I have seen a few boats with a couple of different colors of wire in them I only use one color so just let me know what color you want...

Steve

I think you might have wired my last boat :grumble:

 

[bonesfab]

i have been known to wire a few things.. Rewired my Schiada and all the smoke seems to stay in the wires. They do it in one color because it is cheaper to by one big role of wire.. And don't forget to get the yellow connectors to use on all the small wires too...

 

[Roaddogg 4040]

Yeah, that one looks like one of my jobs... I'm not usually that neat but the guy wanted something really special so I gave it to himD

Steve

 

[BasilHayden]

Definitely give BJ a call, he is absolutely a man of his word and the work he does is nice as well!

 

[alohajeff]

Not sure where you are located or how much wiring needs to be completed. I have used Smith Race Wire out of Upland for a few projects. He wired my prerunner, gave me hours of advice on my boat wiring project, and most recently completely rewired my CRF450. He is a one man show and his attention to detail is excellent. He has a secure shop, lives on site, and the building has an alarm. Pat doesn't run a storage facility like some boat owners seem to expect (free winter storage). When your project is completed he wants it out of there to make room for the next one.

http://www.smithracewire.com/main/HOME.html

Aloha

 

[Racey]

I am in henderson and would like to find someone to re do the wiring under my instrument cluster and install new gauges and switches. Ive talked to a few people about getting it done but most of the shops in this town treat me as if they would be doing me a favor to actually do it. This is on an 89 sleekcraft enforcer if it sounds like something you could knock out could you PM me your contact info?

pm sent

 

[franky]

i have been known to wire a few things.. Rewired my Schiada and all the smoke seems to stay in the wires. They do it in one color because it is cheaper to by one big role of wire.. And don't forget to get the yellow connectors to use on all the small wires too... View attachment 247329

I am cracking up.....too funny

 

[rivergames]

Hahaha Classic

 

[SBMech]

i have been known to wire a few things.. Rewired my Schiada and all the smoke seems to stay in the wires. They do it in one color because it is cheaper to by one big role of wire.. And don't forget to get the yellow connectors to use on all the small wires too... View attachment 247329

OMFG...you made me spit coffee out...so nasty! :thumbsdown

 

[AzGeo]

I'm in Havasu and I've built a few hundred boats over the years. If you are going to be out this way, PM me and I'll take care of it for you. I do wiring to "USCG/NMMA" standards, which means the wires MUST BE at least the correct size (gauge) and color for the circuit it controls, and the breakers/fuses all 'step down' as the circuits divide out to their ends. Can do it this weekend if needed. PM with questions....