Math wizard

[Blackmagic94]

I’m buying a portable garage to house my boat but I need to see if this size will fit

• Overall Dimensions (Feet): 40’ L x 20’ W x 6.5’ - 10.5’ H
• Eaves Height (Feet): 6.5 H; Top Height (Feet): 10.5’ H
• Zippered Door Size (Feet): 16.5’ W x 7’ H

So my boat is

94” tall
90” wide at base
84” wide at top


Can some math wiz figure out the angle and tell me if this is gonna hit the angled sides

 

[Blackmagic94]

Fuck my trailer is 105’ wide

 

[hallett21]

Fuck my trailer is 105’ wide

So you still want the math? Lol


Sent from my iPhone using Tapatalk

 

[Shlbyntro]

Given those dimensions, your door is 10inches too short for the boat to fit under. None of the other dimensions matter at that point.

 

[Blackmagic94]

Given those dimensions, your door is 10inches too short for the boat to fit under. None of the other dimensions matter at that point.

I can completely unzip the front panel and remove it so that doesn’t really matter

 

[Blackmagic94]

So you still want the math? Lol


Sent from my iPhone using Tapatalk

105 at the fender has nothing to do with the slope height if the roof. Just wondering if I need an oversized banner and permit to move now

 

[spectracular]

It will fit

 

[HCP3]

My head hurts. I will try again tomorrow.

 

[Blackmagic94]

It will fit

The 90” wide is 12” below the top of the boat, for safety sake just make the top of the boat 90 wide to see if it clears

 

[spectracular]

still good - I am not factoring the door sizes since you said you can take the front panel off

 

[Blackmagic94]

still good - I am not factoring the door sizes since you said you can take the front panel off

Thank you thank you.

 

[Ziggy]

It will fit

 

[Shlbyntro]

My math shows you have about 15inches of clearance. It's been a while since I took geometry though

 

[rvrrun]

Get a running start....

 

[RCDave]

Try a bigger pitch prop

 

[cpdad93]

well my guess is that those are OD dimensions on your boat hut, not interior. So what is the frame work.

 

[Gramps]

try the new math

 

[Blackmagic94]

well my guess is that those are OD dimensions on your boat hut, not interior. So what is the frame work.

Read the first post

 

[WhatExit?]

I tried to pay attention in math class but somehow I got distracted...

 

[cpdad93]

Read the first post

I did, it shows eave height and overall height the same 10.5.

 

[Blackmagic94]

6.5 at lowest part of roof and 10.5 at center

 

[wzuber]

Fuck my trailer is 105’ wide

dude...unless I'm missing something, your canopy is 20'=240" -105" (trailer) = 135" divide by 2 =67.5" per side for clearance. You planning to drift that bad boy in there? Width not a problem here.

Overall Dimensions (Feet): 40’ L x 20’ W x 6.5’ - 10.5’ H

 

[Blackmagic94]

What does trailer width have to do with roof clearance e

 

[wzuber]

I did, it shows eave height and overall height the same 10.5.

nope....look again brutha....6.5'-10.5' H