Lets see them boats

[Duck'ed_Up]

View attachment 1217423
Will be bringing these out of hibernation soon.

Always wondered where that 335 was. Beautiful boat.

 

[fat rat]

 

[REXCRAFT1]

to much funn!!

 

[poncho]

View attachment 1219252

If i remember right your east coast?....Nice boat.

 

[fastenuff3]

Are you one of the Coceletto (spelling) Brothers? If so you guys had two of the most beautiful drag boats ever. I spent hours staring at them as a kid.

I bought the boat in spring of 1990. It was the Running Wild boat.I sold it in 1994 and it was wrecked a few years later.

 

[Wheeler]

 

[Wheeler]

..

 

[pixrthis]

I bought the boat in spring of 1990. It was the Running Wild boat.I sold it in 1994 and it was wrecked a few years later.

It was a work of art

 

[Runs2rch]

Always wondered where that 335 was. Beautiful boat.

That is a 29.

 

[Happy Smitty]

Always wondered where that 335 was. Beautiful boat.

Its a 290. The camera angle probably makes it look bigger.

Thanks. It's been a great boat. I love the looks.

 

[MR HARLEY]

 

[brgrcru]

My Three

California Performance, Cole, Malibu vtx

 

[BigRedBryan]

My Three
View attachment 1219477 View attachment 1219478 View attachment 1219479 California Performance, Cole, Malibu vtx

That cole is fucking sick!

 

[poncho]

My Three
View attachment 1219477 View attachment 1219478 View attachment 1219479 California Performance, Cole, Malibu vtx

Helluva Navy you got there, something for everyone.

 

[Flying_Lavey]

I finally drug the Lavey home. Since we hadn't had any luck selling it, I'm going to hang on to it, put reverse back in it, and take it out this summer to Naci (costs almost nothing for us to go there). Boat hasn't been in the water in about 5 years and hasn't had reverse in about 12 years.

Finally have enough data to upload pictures...

 

[Ace in the Hole]

MaK decided to have an ear issue this weekend so no water time…but taking the last day here this weekend to thoroughly clean ol “well…schitt”

 

[74 spectra20 v-drive]

View attachment 1219317 View attachment 1219318

Any more pics of the Day Cruiser?

 

[Wheeler]

Any more pics of the Day Cruiser?

I posted them on the classic V-drive page. I'll see if I still have them.

 

[Drew]

Took the winter condum off . I haven’t seen it in two years because my injuries

 

[Chili Palmer]

Gorgeous Boat. I regret selling my 22 offshore. I want another one really bad now.

Thanks. I really like it - we haven’t been able to get the river for the last 2 years and I thought about selling it, but after getting it serviced and out on the water yesterday it changed my mind. This is a keeper. I don’t care how much people say the Mercruiser MPI 350 is a great engine - the 496 HO just blows it out of the water. Yes, I know there’s bigger and more powerful engines out there, but for a non-“race” engine, it’s pretty hard to beat.

 

[Wheeler]

Any more pics of the Day Cruiser?

I purged the computer last night. Give this a try

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

 

[74 spectra20 v-drive]

I purged the computer last night. Give this a try

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

Thank you Sir!!!!!

 

[Hoodoo]

Marinized Duramax fishing boat.

 

[pixrthis]

View attachment 1219926 View attachment 1219927


Marinized Duramax fishing boat.

I’m guessing you fish off the sides?

I’d like to see a write up on this boat and see how it runs.

 

[Hoodoo]

34 Phantom

 

[Hoodoo]

I’m guessing you fish off the sides?

I’d like to see a write up on this boat and see how it runs.

Set up for deep drop bottom fishing.

We built the boat from a rotted out Chris craft 390 stinger but due to a mis communication didn’t leave enough room for 5.9 Cummins as planned. Boat sat in my shed for a few years with only occasional work done. Lost interest after Cummins thing. A couple years ago decided to take a stab at marinzing duramaxes. Strb engine is done and runs great on the trailer lol. The kid helping with the engine wiring left me hanging with port engine. Have a friend in Ohio coming to finish wiring to helm so the boat can start sea trials. I have a pair of yanmar 8L 370’s available if the duramaxes don’t work out. Hoping to finish up this summer. As it sits today it’s a 39 cc, lml/lmm duramaxes mild tune, fly by wire Livorsi throttles, gateway for chart plotter gauges, 300&150 fuel tanks, two 5’ fish boxes, Huber 1550 trans, wet sump 6 drives with 34p 18 props. Current seating is leaning post and bean bags. Looking for 50 mph cruise w/ 3mpg for long distance offshore trips. I trust the hull 100% but not the home brew engines. Actually I think they have potential if left at near stock power but really need true marine wiring harnesses.

 

[pixrthis]

Set up for deep drop bottom fishing.

We built the boat from a rotted out Chris craft 390 stinger but due to a mis communication didn’t leave enough room for 5.9 Cummins as planned. Boat sat in my shed for a few years with only occasional work done. Lost interest after Cummins thing. A couple years ago decided to take a stab at marinzing duramaxes. Strb engine is done and runs great on the trailer lol. The kid helping with the engine wiring left me hanging with port engine. Have a friend in Ohio coming to finish wiring to helm so the boat can start sea trials. I have a pair of yanmar 8L 370’s available if the duramaxes don’t work out. Hoping to finish up this summer. As it sits today it’s a 39 cc, lml/lmm duramaxes mild tune, fly by wire Livorsi throttles, gateway for chart plotter gauges, 300&150 fuel tanks, two 5’ fish boxes, Huber 1550 trans, wet sump 6 drives with 34p 18 props. Current seating is leaning post and bean bags. Looking for 50 mph cruise w/ 3mpg for long distance offshore trips. I trust the hull 100% but not the home brew engines. Actually I think they have potential if left at near stock power but really need true marine wiring harnesses.



View attachment 1219948 View attachment 1219949 View attachment 1219950 View attachment 1219951 View attachment 1219952 View attachment 1219953 View attachment 1219954 View attachment 1219955 View attachment 1219956

Amazing work and definitely worthy of a build thread.

 

[LAVEYNICK]

 

[poncho]

Amazing work and definitely worthy of a build thread.

Absolutely

 

[WTR&PWR]

Maiden voyage tomorrow can’t wait View attachment 1218914

UPDATE: maiden voyage success!

 

[Howardflat]

View attachment 1216568 View attachment 1216569 View attachment 1216570 View attachment 1216571

This last pic has to be of a brummett. My dash is the exact same. color and everything.

 

[Ladsm]

I went down to the boat garage yuesterday and put the batteries on the charger. I need to put a new impeller in it next week then its water time in Bullhead.

 

[River Dirt 2]

This last pic has to be of a brummett. My dash is the exact same. color and everything.

 

[Wheeler]

 

[BIGRED9158]

View attachment 1219995 View attachment 1219993 View attachment 1219994

What the hell it has 3 axles why are those pics outside and not in a ac garage

 

[SOCALCRICKETT]

What the hell it has 3 axles why are those pics outside and not in a ac garage

Lol, that's because it's a carson bummet and not a schiada

 

[Wheeler]

Lol, that's because it's a carson bummet and not a schiada

You'll have to excuse Big Red. I doubt he's had much sleep of late.

 

[HNL2LHC]

MaK decided to have an ear issue this weekend so no water time…but taking the last day here this weekend to thoroughly clean ol “well…schitt”
View attachment 1219634 View attachment 1219633

Sorry to have side tracked you on your project. Was certainly a great time catching up with you and the family. And MaK does know how to give out the best hugs. hope that she is feeling better. I look forward to the next time we are able to get together.

 

[SOCALCRICKETT]

You'll have to excuse Big Red. I doubt he's had much sleep of late.

I bet, I remember those sleepless nights when my son was born

 

[Ace in the Hole]

Sorry to have side tracked you on your project. Was certainly a great time catching up with you and the family. And MaK does know how to give out the best hugs. hope that she is feeling better. I look forward to the next time we are able to get together.

Y'all are always welcome, its a fun break. Bummed we will miss the lot party, but MaK will make it up with the hug factor down the road. It's kinda funny normally she is very shy..but with RDP friends, especially the ones I see more often she is a social butterfly and not stingy with the hugs

She's like me...allergies are awful, but she's about back to herself.

 

[BIGRED9158]

I bet, I remember those sleepless nights when my son was born

What are you talking about didn’t you just kick your wife in bed and say they baby is up that’s what I do

 

[Howardflat]

The running 90% complete boat and the never have enough money project boat.

 

[eand28]

The running 90% complete boat and the never have enough money project boat.

White one a dcm?

 

[River Dirt 2]

White one a dcm?

No, Brummett 21

 

[dan34]

 

[eand28]

No, Brummett 21

That’s what I was thinking of. Beautiful boat

 

[dan34]

 

[SOCALCRICKETT]

View attachment 1220425

Gorgeous! Wish my 21RC was that nice

 

[TrollerDave]

Pretty cool pic my boy took.
Needles last year.

 

[MOUZER]

The running 90% complete boat and the never have enough money project boat.

i will take the b boat....looks like my old one i sunk 10k into just needed more flake LOL was told guy who bought my boat right after i got it out of the gel coat shop he sanded it down and painted it white sold the trailer i guess i over did the