WELCOME TO RIVER DAVES PLACE

Is shiny polished aluminum out?

PlanB

Well-Known Member
Joined
Apr 25, 2018
Messages
4,882
Reaction score
10,293
The blower motor in our DCB was all polished and it was a PITA to keep it looking good. The motor in my Cobra is also polished and if I was to build a new motor, I would Powdercoat a bunch of the polished parts. My Harley's are both blacked out (with a little chrome) and I think it looks better than all chrome or polished.
 

Clank123

Well-Known Member
Joined
Dec 15, 2018
Messages
1,946
Reaction score
13,942
Like Tank said, I like ‘em either way as well.
I’ve built a fair number of boats over the years and I always try to work the owners on what their vision is for the project.
I’ll interject an opinion here and there but try to make it look the way they want it.
As my friend Paul Grichar taught me,..”it’s the customer’s elevator, they get to press the buttons”.
It’s kinda cool when some of them let me pick the combinations on rigging and the engine details.
How about this one…rigged the boat the first time for Blown Bling and then re-rigged it 18 years later, same owner, Unblown and Blacked out!
What’s not to like about both versions!

6BFB5B1C-570D-4325-8445-5D5A7D7853F4.jpeg
3B8E8ED7-CF3E-4791-82DA-DDC74D133E76.jpeg
A925D7D9-3E23-47AD-82EC-BD6687D62737.jpeg
2895BAB4-E973-4AFF-A538-1B3A8184F7ED.jpeg
 

rrrr

Well-Known Member
Joined
Dec 19, 2007
Messages
15,838
Reaction score
35,244
How about this one…rigged the boat the first time for Blown Bling and then re-rigged it 18 years later, same owner, Unblown and Blacked out!
What’s not to like about both versions!

View attachment 1351487
The ratio of hull to engine is wild. With the big scoop and 14-71, it looks like it's pushing a 16 footer!
 

Eliminator21vdrive

Well-Known Member
Joined
Jul 5, 2016
Messages
2,080
Reaction score
4,252
I think it really depends on who is going to do the upkeep lol. I am going to powder coat as much as I can so upkeep is lower. The chrome powder looks just like polished aluminum.
 

Clank123

Well-Known Member
Joined
Dec 15, 2018
Messages
1,946
Reaction score
13,942
The ratio of hull to engine is wild. With the big scoop and 14-71, it looks like it's pushing a 16 footer!
Haha.
Yeah then you add in the intercooler and it really gets tall!
When I was rigging that boat it was on a Dolly trailer.
I had to stand on a step stool just to design and fit the throttle linkage!😂
 

Sharp Shooter

The "anti-yuppie"
Joined
Oct 4, 2007
Messages
7,690
Reaction score
20,176
Haha.
Yeah then you add in the intercooler and it really gets tall!
When I was rigging that boat it was on a Dolly trailer.
I had to stand on a step stool just to design and fit the throttle linkage!😂

You wouldn’t allow my stacked tank brackets to stay gold. Who’s elevator? 😂😂
 

BBYSTWY

Well-Known Member
Joined
Mar 28, 2018
Messages
306
Reaction score
366
2.jpg

motor.jpg


I went with black on mine....looked more sinister to me. Honestly have never been a huge fan of chrome on anything so I decided to go this route and I'm glad I did because it gets a lot of questions/attention....Personally I think it makes it look fast just sitting there. Don't get me wrong, the polished up blower motors do look good I just prefer this.
 

poncho

Well-Known Member
Joined
Dec 20, 2007
Messages
5,864
Reaction score
10,012
Like Tank said, I like ‘em either way as well.
I’ve built a fair number of boats over the years and I always try to work the owners on what their vision is for the project.
I’ll interject an opinion here and there but try to make it look the way they want it.
As my friend Paul Grichar taught me,..”it’s the customer’s elevator, they get to press the buttons”.
It’s kinda cool when some of them let me pick the combinations on rigging and the engine details.
How about this one…rigged the boat the first time for Blown Bling and then re-rigged it 18 years later, same owner, Unblown and Blacked out!
What’s not to like about both versions!

View attachment 1351487 View attachment 1351488 View attachment 1351489 View attachment 1351490
Didn't that boat go down south?
 

Sharp Shooter

The "anti-yuppie"
Joined
Oct 4, 2007
Messages
7,690
Reaction score
20,176
Chrome and shiny metal parts were a big part of early car customizing. I think it was the late 50's or early 60's when the infamous reverse chrome wheels came to be. I dig cool old Hot rod stuff so chrome and polish will always have a place close to my heart. I never understood the "anti-chrome" black wheel fad/movement. It likely came from the younger generations with little or no knowledge or respect of Hot Rodding history.

Dad's 1st boat trailer had reverse chrome wheels as well as his 427 t-bird, Starliner and 65 mustang.

Griffin Archives 001.jpg


kinders65enhanced.jpg


DSC05055a.jpg
 

4Waters

Well-Known Member
Joined
Aug 28, 2016
Messages
34,068
Reaction score
86,336
Heck, its probably got more than 1 cylinder. Nobody needs more than 1 cylinder. Actual quote from AOC;)
Well, we could replace the engine in her car with a Briggs and Stratton 3.5hp and then she will see how well a 1cyl engine works in a car
 

Chili Palmer

Master of My Domian
Joined
Jan 7, 2010
Messages
11,563
Reaction score
23,304
Well, we could replace the engine in her car with a Briggs and Stratton 3.5hp and then she will see how well a 1cyl engine works in a car
It’ll probably work better than an electric car that is in need of charging in zero degree blizzard conditions.
 

77charger

Well-Known Member
Joined
Dec 19, 2007
Messages
6,407
Reaction score
8,319
Polished aluminum has a great look and I like it just would hate the upkeep though.
 

rrrr

Well-Known Member
Joined
Dec 19, 2007
Messages
15,838
Reaction score
35,244
Polished aluminum has a great look and I like it just would hate the upkeep though.
I absolutely agree with your observation.

Although I repolished the engine after every three or four outings, it never again looked as good as the photo I posted above. It's impossible to get the same result unless the carburetors, hoses, wiring, and all other stuff nearby is removed.
 

jetboatperformance

Well-Known Member
Joined
Jan 1, 2008
Messages
8,508
Reaction score
18,547
I will say , The Older I get the LESS I enjoy cleaning and polishing
 

Attachments

  • schiada topless.jpg
    schiada topless.jpg
    57.3 KB · Views: 58
  • schiada 2.jpg
    schiada 2.jpg
    81.7 KB · Views: 56
  • MVC-004S.jpg
    MVC-004S.jpg
    37.8 KB · Views: 57

Clank123

Well-Known Member
Joined
Dec 15, 2018
Messages
1,946
Reaction score
13,942
Points added for using black hoses and clear anodized fittings. They look great.

I just don't like red and blue anodized fittings. They were OK in 1978, but I think black hoses and black or clear fittings are the best.
Oh man…my pet peeve!
On any (allegedly) period correct car or boat first thing I look at!
The worst are the Front Motor cackle car guys! Rarely any attention paid to the proper fittings and line.
I’ve heard all the excuses.
But guess what, they ran Nitro in the 60’s!
About the only thing available in the 60’s in “aircraft fittings” came from a surplus store and they were not always anodized. That’s how Earls got started.
I try very hard to make the fittings and line right.
For most the 60’s it was surplus, rubber hoses and weatherhead fittings if you didn’t want hose clamps.
I used the correct “spade” style clamps on all the low pressure lines on the AA/Fuel dragster we did, on the Banzai I was told that Keith Black had a Weatherhead bin of fittings in the shop so that’s what they used.
Of course on the Shockwave it had to be red/blue anodize. I used Summit fittings. I like that the red and blue is darker.

E68AB748-7953-4DB5-8E80-D4398D852064.jpeg
7FA16C9C-27EC-4580-B114-1C2D8C12C784.jpeg
6E961FA7-9FDE-47D4-84F5-F0F48CEBAD5C.jpeg
94524C88-3D78-4E12-BCA4-701B838B922B.jpeg
 
Last edited:

rrrr

Well-Known Member
Joined
Dec 19, 2007
Messages
15,838
Reaction score
35,244
Oh man…my pet peeve!
On any (allegedly) period correct car or boat first thing I look at!
The worst are the Front Motor cackle car guys! Rarely any attention paid to the proper fittings and line.
About the only thing available in the 60’s in “aircraft fittings” came from a surplus store!
I couldn't agree more.

You'll notice I used standard black USCG approved hoses and stainless band clamps on my engine for that reason. The 427 had the original carbs and was still standard bore with stock internals, so I wanted to preserve that condition as much as possible. I did make concessions to period accuracy by installing a Magnaflow water pump and MSD billet distributor.

The original water pump was damaged, and I decided the Magnaflow was better for a replacement because protection of the rare engine was important. The original distributor on the 427 was Mallory dual point with a Ford ID plate. I had messed around with enough fussy Mallory units beginning in high school to decide I didn't want to do that again, and the MSD coupled to a hidden MSD 6M-2L was again a better choice to protect the engine while providing reliability and performance.

The engine didn't have an alternator, and I explored using a driveshaft driven solution because I didn't want to hang one externally and alter the original appearance. In the end I decided using the battery was OK, because I didn't think I would be driving it for more than an hour or two at one time. That worked out fine.

I also replaced the Thoroughbred V-drive with a Casale, because of reliability and parts availability concerns. Since I had zero experience with a V-drive boat, the assistance of @beaverfab was greatly appreciated. The prop shaft was also replaced, again to ensure a fifty year old part wouldn't cause a catastrophic failure.
 

Clank123

Well-Known Member
Joined
Dec 15, 2018
Messages
1,946
Reaction score
13,942
I couldn't agree more.

You'll notice I used standard black USCG approved hoses and stainless band clamps on my engine for that reason. The 427 had the original carbs and was still standard bore with stock internals, so I wanted to preserve that condition as much as possible. I did make concessions to period accuracy by installing a Magnaflow water pump and MSD billet distributor.

The original water pump was damaged, and I decided the Magnaflow was better for a replacement because protection of the rare engine was important. The original distributor on the 427 was Mallory dual point with a Ford ID plate. I had messed around with enough fussy Mallory units beginning in high school to decide I didn't want to do that again, and the MSD coupled to a hidden MSD 6M-2L was again a better choice to protect the engine while providing reliability and performance.

The engine didn't have an alternator, and I explored using a driveshaft driven solution because I didn't want to hang one externally and alter the original appearance. In the end I decided using the battery was OK, because I didn't think I would be driving it for more than an hour or two at one time. That worked out fine.

I also replaced the Thoroughbred V-drive with a Casale, because of reliability and parts availability concerns. Since I had zero experience with a V-drive boat, the assistance of @beaverfab was greatly appreciated. The prop shaft was also replaced, again to ensure a fifty year old part wouldn't cause a catastrophic failure.
She’s a beauty and true to the period.
 

Rajobigguy

Well-Known Member
Joined
Aug 21, 2015
Messages
4,896
Reaction score
10,771
Shiny stuff in motor compartments is still in vogue, Shiny stuff in interiors is almost as overused and passé as diamond stich upholstery.
 

Tank

Well-Known Member
Joined
Jul 12, 2008
Messages
20,945
Reaction score
49,759
Another question….whats everyone’s favorite polish?

Im
Looking for MAGIC!

I’ve used Flitz, star rite, never dull, blue magic and a couple others. No “wow” factor. They all take a lot of rubbing and a lot of buffing.

Anything out there that’s like, “holy shit, that cut the work way down!”
 

Sharp Shooter

The "anti-yuppie"
Joined
Oct 4, 2007
Messages
7,690
Reaction score
20,176
Another question….whats everyone’s favorite polish?

Im
Looking for MAGIC!

I’ve used Flitz, star rite, never dull, blue magic and a couple others. No “wow” factor. They all take a lot of rubbing and a lot of buffing.

Anything out there that’s like, “holy shit, that cut the work way down!”

This is what I use.

IMG_1578.jpeg
 

DiamondDave

Well-Known Member
Joined
Oct 24, 2018
Messages
50
Reaction score
82
Looks like we have similar amounts of polishing to do... I use "Heavy Metal" polish. The green (medium) specifically. The blue (fine) does not do $hit and the red (heavy) leaves it... meh. Not sure if they are still around but whatever you use, I would get a drill with various sizes/shapes buffing wheels to make it at least bearable.
 
Last edited:

welldigger00

Well-Known Member
Joined
Aug 18, 2010
Messages
3,737
Reaction score
8,818
I use zephyr products. I’ve gone a little nuts on the Peterbilt lately, and I’ve bought grinders, D/A’s, all the wheels, disc, rouge, etc. It took a little bit of a learning curve, but I’ve been enjoying a ton of success. It’s filthy hard work for sure. Ton of YouTube vids helped me out…
 

Cooter01

Well-Known Member
Joined
Apr 1, 2023
Messages
319
Reaction score
422
Another question….whats everyone’s favorite polish?

Im
Looking for MAGIC!

I’ve used Flitz, star rite, never dull, blue magic and a couple others. No “wow” factor. They all take a lot of rubbing and a lot of buffing.

Anything out there that’s like, “holy shit, that cut the work way down!”

Zephyr products is the best I have found from using all the different kinds
 
Top