Hallett 210 on trailer dimensions?

[Croz]

hello RDP, like the title says, I’m looking for standard or close dimensions of my 210 on the trailer. From hitch to outdrive and the standard width. My boats in Parker and the wife and me are heading up to minden/gardnerville to look at homes this weekend. We’re moving! We think it’s going to be a nice place to raise a family. Crazy to think about honestly, but the 210 in Tahoe and topaz should be cool too, especially only being about 30 mins from our future home. Any help is appreciated, and if you’re familiar with the area or familiar with boating on Tahoe, feel free to chime in…and yes I know it’s cold there lol

 

[HNL2LHC]

Dang it our boat is in for annual maintenance. If you don’t get an answer I will run down to the shop and get you what you need this afternoon.

 

[hallett21]

Vector with an outboard is 27ft tip of tongue to back of lowered outboard.

Good luck!

 

[Croz]

Vector with an outboard is 27ft tip of tongue to back of lowered outboard.

Good luck!

Thanks man. I’m assuming it’ll be roughly the same. And welcome back buddy! Missed ya around here and on insta

 

[hallett21]

Thanks man. I’m assuming it’ll be roughly the same. And welcome back buddy! Missed ya around here and on insta

Thanks! Ya should be with 6” of each other.

Edit. I also have 12” of setback bracket too. So 27’ should be more than enough.

 

[C-Ya]

I kept my 210 on trailer in 30’ storage. Never had problem.

My friend put a swing tongue on his 210, and he could fit his diagonal in a 2 car garage.

Af far as Gardnerville…….. If you don’t already ride dirt bikes, you will once you move to Gardnerville. There are so many places to ride. Its awesome. I spent several summers there.

We used to go to this abandoned quarry and jump off the cliffs into the waterhole below. If it was cold, I don’t remember.

There are a few Basque restaurants, so you will have no trouble finding sheep nuts to munch on. Lol

 

[Croz]

I kept my 210 on trailer in 30’ storage. Never had problem.

My friend put a swing tongue on his 210, and he could fit his diagonal in a 2 car garage.

Af far as Gardnerville…….. If you don’t already ride dirt bikes, you will once you move to Gardnerville. There are so many places to ride. Its awesome. I spent several summers there.

We used to go to this abandoned quarry and jump off the cliffs into the waterhole below. If it was cold, I don’t remember.

There are a few Basque restaurants, so you will have no trouble finding sheep nuts to munch on. Lol

I have ridden moto for over 20 years! I also am an avid snowboarder and my wife a snow skier. Being 30 minutes from heavenly and kirkwood/ 2.5 hours from mammoth. then Lake Tahoe and topaz lake both 30-40 minutes away, to potentially being able to ride from our driveway to BLM land seems like a great spot for that. Plus the population is 5k

 

[satellitemike]

I just had some in laws move up to Minden from So CA. Let me know if you would like some help w the home search, they spent months narrowing it down.

 

[Croz]

I just had some in laws move up to Minden from So CA. Let me know if you would like some help w the home search, they spent months narrowing it down.

Sent a dm

 

[HNL2LHC]

I just had some in laws move up to Minden from So CA. Let me know if you would like some help w the home search, they spent months narrowing it down.

Funny had some friends move up there 2 years ago. Was a good place to visit.

 

[getch]

Mine is 26’ long overall if you trim the drive down. Width should be standard 100-102” at the fenders.

 

[Croz]

Mine is 26’ long overall if you trim the drive down. Width should be standard 100-102” at the fenders.

Right on thank you

 

[Todd Mohr]

Some great dirt biking there for sure, look at the Johnson lane area, big lots with big shops and ride right from your house.

 

[Croz]

Some great dirt biking there for sure, look at the Johnson lane area, big lots with big shops and ride right from your house.

That’s exactly where we’re looking dude! Thank you