HALLETT 210.. 454 MAG EFI??

[2FORCEFULL]

WILL IT GO 70???:headscratch:

 

[Hypnautic]

You pullin it with a Hemi???

 

[2FORCEFULL]

CLOSED BOW

 

[DRIVE BYE]

You gonna pick that one up? i was gonna come up and look at it

 

[2FORCEFULL]

You pullin it with a Hemi???

LOL''' IT DID 75 TODAY

 

[2FORCEFULL]

You gonna pick that one up? i was gonna come up and look at it

i FINALLY went and got it... it was driv'n me nuts..
I said if I sold the gulwing I would get it if it was still there...

then when I had the cash in hand I almost let it get away...

it sets on a new trailer... 128 hrs on boat..

 

[RiverDave]

WILL IT GO 70???:headscratch:

i FINALLY went and got it... it was driv'n me nuts..
I said if I sold the gulwing I would get it if it was still there...

then when I had the cash in hand I almost let it get away...

it sets on a new trailer... 128 hrs on boat..

Gorgeous boat Steve.. We gamblin on this one?

If it's the 385HP 454Mag, then it should run right around 70 I would think.

RD

 

[DRIVE BYE]

o.k. nice! i was gonna buy it. it did 75?:thumbsup

 

[C-2]

Mine has the carb 454, Lightning Headers and tweaked prop and does 70 gps at Elsinore and Havi. I think you should be there with the extra 20hp and closed bow? Aren't the closed bow 210's the same bottoms as Vectors?

 

[2FORCEFULL]

Mine has the carb 454, Lightning Headers and tweaked prop and does 70 gps at Elsinore and Havi. I think you should be there with the extra 20hp and closed bow? Aren't the closed bow 210's the same bottoms as Vectors?

I think they are 20 degree

 

[2FORCEFULL]

Gorgeous boat Steve.. We gamblin on this one?

If it's the 385HP 454Mag, then it should run right around 70 I would think.

RD

no gambling for me....:bash:

 

[2FORCEFULL]

o.k. nice! i was gonna buy it. it did 75?:thumbsup

you rode in it???

 

[boat527]

Mine has the carb 454, Lightning Headers and tweaked prop and does 70 gps at Elsinore and Havi. I think you should be there with the extra 20hp and closed bow? Aren't the closed bow 210's the same bottoms as Vectors?

Nice Boat! Different bottoms/Different Pad

 

[2FORCEFULL]

Nice Boat! Different bottoms/Different Pad

well, I never checked the bottom,I hope its the same as the hallett 210 open bow...

 

[Drew01]

The 1994 I had with a carb 454 did 70mph. I did not see it in the for sale section, how much are you asking? How bad were the blisters and scratch they spoke of in the ad?

 

[2FORCEFULL]

The 1994 I had with a carb 454 did 70mph. I did not see it in the for sale section, how much are you asking? How bad were the blisters and scratch they spoke of in the ad?

fixable...more like little pimples..should color sand out???

I thought it was a smok'n deal

 

[Just 4 fun]

The 1994 I had with a carb 454 did 70mph. I did not see it in the for sale section, how much are you asking? How bad were the blisters and scratch they spoke of in the ad?

Yea...how much are you asking.....you might as well say now

 

[2FORCEFULL]

I wanna at least get it wet acouple times before I kick it to the curb...

 

[dribble]

It should do 70 with a quarter tank of gas, just you in it and a 5 mph tail wind.

 

[2FORCEFULL]

o.k. nice! i was gonna buy it. it did 75?:thumbsup

on the trailer...

 

[2FORCEFULL]

The 1994 I had with a carb 454 did 70mph. I did not see it in the for sale section, how much are you asking? How bad were the blisters and scratch they spoke of in the ad?

finally got some pics, I was gonna take it to the lake today but the sun hasn't come out yet

I was gonna re gel the bottom... but what would it hurt if I just left it..
I'm not gonna keep it in the water

 

[Cole Trickle]

looks good....

Would it be a big deal to swap out those funky black square bezels for some rond red ones?

Seems like that would be a simple way to clean up the dash.

 

[2FORCEFULL]

this pic has the bumps...
my other idea was to speed coat the bottom

 

[2FORCEFULL]

anyone here do gel coat that would wanna do the job... or should I just leave it??

 

[ultra26shadow]

anyone here do gel coat that would wanna do the job... or should I just leave it??

Just leave it your gonna sell it next week anyway and say you got 2k into it and its the baddest mofo on the water and its a perfect mead boat and you are the 1st owner since you bought it

 

[2FORCEFULL]

Just leave it your gonna sell it next week anyway and say you got 2k into it and its the baddest mofo on the water and its a perfect mead boat and you are the 1st owner since you bought it

my vegas stable is look'n good right now with the 210 and the 270:thumbsup

 

[2FORCEFULL]

I checked the bottom.. its a 19 degree v.... should ride pretty smooth

 

[oldschool]

Actually, the deadrise on a 210 is 18 degrees.

 

[RiverDave]

no gambling for me....:bash:

C'mon... LOL You're helping to support this place!

anyone here do gel coat that would wanna do the job... or should I just leave it??

I know some peeps that would do the job.. Sanding those down and regelling should be pretty cheap. 600 - 800 I would guess?

RD

 

[2FORCEFULL]

C'mon... LOL You're helping to support this place!



I know some peeps that would do the job.. Sanding those down and regelling should be pretty cheap. 600 - 800 I would guess?

RD

well who ?

 

[spectras only]

How this boat got blisters [ osmosis] ,sitting in water a lot ? Sanding it down to the fiberglass and regel may not cure the problem if water got deeper into the fiberglass that's not waterproof . I'd leave it , remove the square bezels ,throw some nice powdercoated ones on and use it as is for a while . I mean a few weeks
I better look at my buddy's 34' he just bought . Hope that boat spent its life on the trailer .

 

[2FORCEFULL]

How this boat got blisters [ osmosis] ,sitting in water a lot ? Sanding it down to the fiberglass and regel may not cure the problem if water got deeper into the fiberglass that's not waterproof . I'd leave it , remove the square bezels ,throw some nice powdercoated ones on and use it as is for a while . I mean a few weeks
I better look at my buddy's 34' he just bought . Hope that boat spent its life on the trailer .

I heard it sat in a slip at lake arrohead for a season...the bumps aren't very bad , but are there..I think its fine as is .. but would like to fix it anyways..

 

[2FORCEFULL]

anyone here interested in doing the repair??

 

[rivermobster]

Nice boat, looks brand new for the most part. :thumbsup

 

[Jet-Daytona]

How this boat got blisters [ osmosis] ,sitting in water a lot ? Sanding it down to the fiberglass and regel may not cure the problem if water got deeper into the fiberglass that's not waterproof . I'd leave it , remove the square bezels ,throw some nice powdercoated ones on and use it as is for a while . I mean a few weeks
I better look at my buddy's 34' he just bought . Hope that boat spent its life on the trailer .

I have a neighbor with a Hallet and has the same thing and getting the run around and I feel will get "stiffed":thumbsdown

 

[2FORCEFULL]

Nice boat, looks brand new for the most part. :thumbsup

thanks, it look to have not been used much...

 

[nordic454]

is that the 210 that was sitting at Offshore Marine forever?

 

[Kachina26]

anyone here interested in buying it??

Maybe......:champagne:

Pretty sweet boat, but the gage bezels are a big WTF.

 

[2FORCEFULL]

is that the 210 that was sitting at Offshore Marine forever?

I have no idea... doesn't look like it ever was out side...

the boat looks showroom new.. but it had to of set somewhere to only have 126 hrs..

usually boats this pristine have had a pretty much pamperd
garage kept life... how long ago did you see the one over there??

 

[2FORCEFULL]

wow thats a nice boat.

thanks...

 

[farmo83]

My dad had the 375 hp 496 in his 210BR and he GPS'd his at 73 with a 24 prop.

 

[2FORCEFULL]

think I'll run it out to mead and see how it runs...

sure looks cold out though

 

[Kachina26]

thanks...

You are going to change the bezels before I buy it, right? :champagne:

 

[PolarBearKing]

on the trailer...

:rotflmao:

 

[2FORCEFULL]

thats the baddest boat I've ever seen, will you take 30k for it..I love that it like brand new and all stock... hell, a new one is 80k

I'll have to think about it..I kinda wanna keep it but if you want it that bad ... show me the money

 

[2FORCEFULL]

went out to mead.... nice boat... fun to drive..

23p 4 blade was too small, did around 74 on the speedo at 53/5400 rpms,

water was ruff... boat was smooth.. everything worked

 

[2FORCEFULL]

You are going to change the bezels before I buy it, right? :champagne:

show me the money

 

[Just 4 fun]

Wasn't it raining, it's been raining here all day. It had to be freezing cold out there

 

[2FORCEFULL]

Wasn't it raining, it's been raining here all day. It had to be freezing cold out there

no rain, wind kicked up a little.. wasn't cold at all:thumbsup

 

[Kachina26]

show me the money

It's the best I can do for now.:rotflmao: