For Sale - Magnuson Supercharger, Intake and Intercooler

[BamBam]

For Sale - Magnuson M112 Supercharger with air to water intercooler and Sheet metal manifold for LS Cathedral port heads. Rebuilt by SuperchargersOnline and only a few trips on it since rebuild. Griptec 2.60" pulley set up for Camaro (F-Body) belt line. Holley 100lbs. injectors and aluminum fuel rails. BBK throttle body (with no sensors) will include intercooler water pump and expansion tank for intercooler plumbing as well as a few drive belts.
Located in Torrance, CA
$3500 $3250
Mike (310) three four 4-2115 texting is fine
I also have Patriot CNC ported LS1 cylinder heads that I will include for and additional $1000. Heads were rebuilt with 1 trip on them.
Will pull it apart now but plan on 1 more trip over Presidents Day. Still on the car running if you want to hear it before buying.

 

[Boatmaster]

Any idea how much height this adds over a stock LS1 intake. Do you have to run the intercooler? Interested buyer if it will fit under my hood. Thank you.

 

[BamBam]

I can measure the height for you. You do not need to run the intercooler it was originally built without it.

 

[BamBam]

Any idea how much height this adds over a stock LS1 intake. Do you have to run the intercooler? Interested buyer if it will fit under my hood. Thank you.

The top of the blower is 11 5/8” above the valley cover and the intercooler is 1 5/8” thick so math says it’s 10” above the valley cover without the intercooler. I don’t have the dimensions on the stock LS1 manifold so hopefully you can work with these numbers. Let me know if you need any other dimensions.

 

[BamBam]

Bach home from Glamis and available.
Started on the off-season changes so the car is home and parts are available.

 

[BamBam]

Price drop
$3250

 

[BamBam]

Parts are removed and ready for the next boat, hot rod or buggy looking for boost.
This will also work with the Corvette belt line by changing the blower pulley to a standard pulley offset.