Enduro Build

[420HOA]

Long story, picked up this hull from Freezin Jim a while back with the intensions of running in the then Parker 300. First stop was Islander marine for the glass tank removal and new bulkhead work for the new aluminum tanks. Second stop was Prime marine for the pedal set up, v-drive rebuild, new strut, shaft and a few other things. Now shes home and being mated to a 540 TT EFI Billy Dunsmore motor I picked up here on RDP. Im to busy with work and other projects to rig this boat, so Bad Czek wil be doing the rigging and the driving. We are looking for sponsors and team members to make all this happen.
There you go Dave, Front Page

 

[rivergames]

Does Joe know how to drive one of those ?

Looks good from the teaser shot u put up :thumbsup

 

[420HOA]

Joe can drive anything :thumbsup
Except my Jeep

 

[rivergames]

Joe can drive anything :thumbsup
Except my Jeep

I saw he took his boat out last weekend:thumbup:

 

[420HOA]

That thing is fast :thumbsup

 

[Nord]

That thing is fast :thumbsup

It's fast during the rpm races on the dock...........

 

[420HOA]

I was'nt there for the REV OFF this time, he said he dyno'd it on the dock

 

[RiverDave]

Not sure about Front page until we get into the build photos..

Do you have a sponsorship package put together?

RD

 

[420HOA]

No sponsorship yet, GLCi will be sponsoring the fuel and the beer

 

[whiteworks]

When is this deal? I will be in Montreal and possibly Barcelona in at different points in October, if I'm around I will come drink your beer, I mean provide race support

 

[RiverDave]

When is this deal? I will be in Montreal and possibly Barcelona in at different points in October, if I'm around I will come drink your beer, I mean provide race support

Oct 25-26th..

RD

 

[420HOA]

Stringer rails were abused over the years so Uncle Rick Snavely welded them up and I milled them back down and shaped the new plate blocks to fit. Whipped out a trans cross member cause that too was abused to death. Pretty much everything in this boat was worn out.
Meanwhile over at Joe's shop the motor tear down begins. :thumbsup

 

[Bad Czech]

Oct 25-26th..

RD

Is this for sure???????????????????????????????????????????????????????????????????????????????????????????????????????????????

 

[RiverDave]

Is this for sure???????????????????????????????????????????????????????????????????????????????????????????????????????????????

Unless something changed I am unaware of? Lol

 

[RACER J]

Sounds like a good time!! If you need any custom parts made or machined let me know, I'll be happy to do whatever I can to help.

 

[Hammer]

Bad ass Glen !

 

[RiverDave]

Sounds like a good time!! If you need any custom parts made or machined let me know, I'll be happy to do whatever I can to help.

What do you machine exactly? boat parts / cav plates / etc?

 

[whiteworks]

What do you machine exactly?

Good question, what do you machine exactly?

 

[RiverDave]

Good question, what do you machine exactly?

Me? Nothing anymore.. I just have a real cool looking garage..

RD

 

[whiteworks]

Me? Nothing anymore.. I just have a real cool looking garage..

RD

You know who else had a real cool looking garage? Hitler, that's who!

 

[RACER J]

What do you machine exactly? boat parts / cav plates / etc?

Anything that comes through the door. I have a small job shop, mostly machine gear boxes for frost protection "wind machines" and a lot of farm and dairy repair.
On the welding side we build boat dock frames, do some structural steel work and whatever else is drug through the door. Lol

 

[420HOA]

Last night got her up on the stand, got it leaked down and the valves lashed in. Rick has the program down loaded from Autronics, gotta make a cable to connect to the laptop and then we should know how she is currently set up. Today we will drop the pan and the rod caps and if all checks out we will be on the dyno next week. Other than a bad front cover gasket so far so good:thumbsup Really cool to have Tom Masek (Masek Racing engines) and Rick Snavely (Snavely racing engines) helping on this venture, thanks boys !

 

[Bad Czech]

It's a "Joint" Venture!!!!!!!

 

[Bad Czech]

Not sure about Front page until we get into the build photos..

Do you have a sponsorship package put together?

RD

So Dave........ It's kinda hard to put together a sponsorship packet when you don't have any info except the date ?????? Is there a flyer?? Entry fees?? Pre-entry form?? Rules?? Classes?? Payout?? Spectators?? Coarse layout?? TV time (yea right)?? Vendors?? Location?? Ect........... Just sayin!!!!!

 

[steveo143]

So Dave........ It's kinda hard to put together a sponsorship packet when you don't have any info except the date ?????? Is there a flyer?? Entry fees?? Pre-entry form?? Rules?? Classes?? Payout?? Spectators?? Coarse layout?? TV time (yea right)?? Vendors?? Location?? Ect........... Just sayin!!!!!

NO SHIT!!!!!!!!!!!!!!!!!!!!!

 

[RiverDave]

So Dave........ It's kinda hard to put together a sponsorship packet when you don't have any info except the date ?????? Is there a flyer?? Entry fees?? Pre-entry form?? Rules?? Classes?? Payout?? Spectators?? Coarse layout?? TV time (yea right)?? Vendors?? Location?? Ect........... Just sayin!!!!!

Will have a lot of your answers Saturday and posted Monday.

 

[Nord]

I still think there should be a spot in the day for minis.

 

[Riverbound]

So Dave........ It's kinda hard to put together a sponsorship packet when you don't have any info except the date ?????? Is there a flyer?? Entry fees?? Pre-entry form?? Rules?? Classes?? Payout?? Spectators?? Coarse layout?? TV time (yea right)?? Vendors?? Location?? Ect........... Just sayin!!!!!

Details details details.......

 

[420HOA]

Lets peak inside Billy Dunsmores bottom end (no disrespect)
Just wanna Know !

 

[420HOA]

Movin along

 

[420HOA]

Heres what was found, motor had a stretched timing chain, cracked oil pickup and a bad oil pump. While Tom and Rick buttoned her up I was milling the the plate blocks and making spacers to raise the motor plates up for the oil pans to clear the hull. We will be at the dyno this week :thumbsup
Oh, AJ approves !

 

[Nord]

Is the guy that looks like Geppetto Joe's Dad?

 

[420HOA]

Is the guy that looks like Geppetto Joe's Dad?

Yes, NO RD Tom is Joe's dad:rolleyes

 

[Bad Czech]

Yes, NO RD Tom is Joe's dad:rolleyes

NO RD........Hahahahahaha......Good one Glenn!!!!

 

[420HOA]

Parts delivery 6 AM
3 PM rears done :thumbsup

 

[CampbellCarl]

Parts delivery 6 AM
3 PM rears done :thumbsup

Were the mountains still blue on the delivery box?

 

[420HOA]

Were the mountains still blue on the delivery box?

Never running out of BLUE delivery boxes:thumbsup

 

[Bad Czech]

Will have a lot of your answers Saturday and posted Monday.

Hey Dave...........I know you get up at noon so I waited to post this...... It's Monday????

 

[Nord]

Hey Dave...........I know you get up at noon so I waited to post this...... It's Monday????

Dave is out on a boat "working" Joe.

 

[RiverDave]

Hey Dave...........I know you get up at noon so I waited to post this...... It's Monday????

Will get with Scott tonight and have updates

 

[CampbellCarl]

Hey Dave...........I know you get up at noon so I waited to post this...... It's Monday????

He was up early today but sadly, I'm sure he'll be way too busy playing with a big boat on the lake to post such menial things like Enduro details.....

 

[Bad Czech]

Will get with Scott tonight and have updates

Who's Scott??

 

[Nord]

Who's Scott??

Scott's the guy Dave has to meet up with for the updates :thumbsup

 

[CampbellCarl]

Who's Scott??

I think that Scott is the new RDP intern. He took Nord, then Hammer now Pink Taco's place as the one who gets shit done.

 

[420HOA]

I think that Scott is the new RDP intern. He took Nord, then Hammer now Pink Taco's place as the one who gets shit done.

Carl can we get you on board as the teams mouthpiece, low pay lotta beer and a slight chance at finishing


I'll get you a better seat than last year :thumbsup

 

[Hammer]

If you need an extra hand in the pits I will volunteer my services. That is if I'm not "volunteering " for RD and working the enduro...

 

[420HOA]

If you need an extra hand in the pits I will volunteer my services. That is if I'm not "volunteering " for RD and working the enduro...

10 minute pit, think you can stay awake ?
No Nape

 

[Hammer]

10 minute pit, think you can stay awake ?
No Nape

Day time shouldn't be a problem

 

[CampbellCarl]

Carl can we get you on board as the teams mouthpiece, low pay lotta beer and a slight chance at finishing


I'll get you a better seat than last year :thumbsup

So you're offering the position of Vice-President of Team Communications with no pay, a couple of luke warm beers and no chance at the podium?

I'm all in!

 

[Nord]

Zig zag called. They are in for sponsorship.............
Coors didn't answer their phone.
The following companies were also interested in product placement on the boat during the race:
JB Weld
Lucas Oil system Rev Limiter- Limiter.
Gold Bond
Tux medicated pads
Sparklematic
Magnum condoms with rubberbands
Dr Scholz eye straightner
And Febreeze............