Bimini Top company

[SPECTRABRENT]

I am Looking for a Bimini top company, I have a stainless Bimini that was made 20 years ago, it’s Ok. I have heard Nordic makes some real nice Bimini tops. Any pictures of Nordic Bimini tops?

Thank you!

Brent

 

[HNL2LHC]

You looking for top and frame or just top?

 

[DarkHorseRacing]

I am Looking for a Bimini top company, I have a stainless Bimini that was made 20 years ago, it’s Ok. I have heard Nordic makes some real nice Bimini tops. Any pictures of Nordic Bimini tops?

Thank you!

Brent

I’ve heard good things about Main stitch in LHC. I’m considering updating mine. Frame is fine just swapping the mesh out for new.

 

[zbudman]

Seam Dreams in Lake Havasu

 

[Mike K]

Seam Dreams for sure.
She’s doing mine on Feb 1st.

 

[n2otoofast4u]

Buddy just had his built (frame included) at Seams Dreams and it turned out great!

 

[rivermobster]

I’ve heard good things about Main stitch in LHC. I’m considering updating mine. Frame is fine just swapping the mesh out for new.

That's who did mine. I'm very happy with it.

 

[76 Hondo]

Custom Covers LHC did the 2 Biminis and a full cover for my Pontoon,

 

[SPECTRABRENT]

Can you post pictures of your Bimini tops?

 

[HNL2LHC]

Custom Covers LHC did the 2 Biminis and a full cover for my Pontoon,

Michelle did or cover only and would use her again. She scheduled us on a day and we dropped off a ndpicked up the same day. Timelines were out a bit so best if you reach out a few months before you want it done.

Can you post pictures of your Bimini tops?

 

[RiverDave]

Be prepared for sticker shock out here..

 

[82daytona]

Nordic did mine and looks great. Sorry no pictures

 

[Wave Hi]

Michelle did or cover only and would use her again. She scheduled us on a day and we dropped off a ndpicked up the same day. Timelines were out a bit so best if you reach out a few months before you want it done.



View attachment 1193537 View attachment 1193538

Nice bimini , but that glass garage door is pretty awesome.

 

[DB / HAV]

Seam Dreams did mine and turned out great.

 

[F.U.IRS]

Be prepared for sticker shock out here..

That's a fact, I've got a couple estimates in the past few weeks. Holy shit

 

[evantwheeler]

I am Looking for a Bimini top company, I have a stainless Bimini that was made 20 years ago, it’s Ok. I have heard Nordic makes some real nice Bimini tops. Any pictures of Nordic Bimini tops?

Thank you!

Brent

Where do you live?

I had a new stainless bimini frame made here in Temecula last spring for $550. I bent a pole on my old aluminum frame and it made more sense to just have a whole new frame made.

Sena's Boat Covers is the company, and he was a pleasure to work with.

Sena's Boat Covers - Temecula CA

I bent a bimini pole a few months back being a dummy. I posted in an existing thread here asking for some suggestions for bimini frame work in the IE and nothing came to fruition. This AM I had some time to call around as a last ditch effort to find someone as I am taking the boat to Havasu...

www.riverdavesplace.com

 

[Paradox]

​

I have a brand new stainless one I never used. It’s a side mount measued to fit a 28 Donzi ZX. 36 inches high. Back stainless support bars. Siting in storage. Let me know if you have any interest.

 

[DWC]

That's a fact, I've got a couple estimates in the past few weeks. Holy shit

What’s the ballpark?

 

[zbudman]

Mine was just over 2K for only the cloth/canvas. Three colors with mesh down the center. That was two years ago

 

[SPECTRABRENT]

Mine was just over 2K for only the cloth/canvas. Three colors with mesh down the center. That was two years ago

Can you post a picture of your Bimini?

 

[SPECTRABRENT]

​

I have a brand new stainless one I never used. It’s a side mount measued to fit a 28 Donzi ZX. 36 inches high. Back stainless support bars. Siting in storage. Let me know if you have any interest.

View attachment 1193640 View attachment 1193641 View attachment 1193642

Looks like a nice Bimini, I want one with colors of my boat.

Thank you,

Brent

 

[SPECTRABRENT]

I just found this Bimini doing a search, low profile like this Schiada

 

[zbudman]

This is the best I can find

 

[Paradox]

Probably worth noting that in lieu of the side mount I had purchased ( and didn’t like how it set in the closed condition), Teague Marine had their folks install a top mount stainless unit for me while the boat was there for service. There was no additional wait and, if memory serves, it was about $1200 all in.

 

[28Eliminator]

I had a new one built last year. Went to Seam dreams, don’t waste your time… rudest lady I ever met. Went to “In Stiches” in Havasu. Great people, did a great job.

 

[n2otoofast4u]

I just found this Bimini doing a search, low profile like this Schiada

@Outdrive1 owns this I think.

 

[SPECTRABRENT]

Probably worth noting that in lieu of the side mount I had purchased ( and didn’t like how it set in the closed condition), Teague Marine had their folks install a top mount stainless unit for me while the boat was there for service. There was no additional wait and, if memory serves, it was about $1200 all in.

View attachment 1193671 View attachment 1193672

That’s a nice Bimini!

 

[F.U.IRS]

What’s the ballpark?

About $4100 at both places

 

[DWC]

About $4100 at both places

Yikes.

 

[Kbach]

Yikes.

No shit. That’s more than I paid for a 94 Ultra 21 I had a while ago. Think I paid $3800 at the time…and it included a bimini

Sold it at the height of stupid boat prices for $16k so can’t complain.

 

[WTR&PWR]

I had a guy in town do mine for my eagle. Full stainless steel and did the mesh in the center. He did a really nice job and works out of his garage. He used to own a shop in the I.E. but made the jump to havasu. He only charged me $800 and gave me some extra straps. Real nice guy.The pics are as he was putting it together so it looks wrinkled but wasn’t when he was done.

 

[CoolCruzin]

All American Canvas in Ontario ca
Can do some good work
This is about 6 years back
Did it with the mesh material and stainless

 

[Desert Whaler]

What are you guys using for the mounting hardware where the front and rear straps attach, as well as where the center rails mount the boat?
I still have the orig. bimini in great shape, but i'd like to see if there is more modern hardware available.
Mine mounts 'flat', or 'level' with the ground/ water . . . as pictured above.