Back ordered products?

[Dog]

With the "supply chain issues" what is the longest you have waited for something to be in stock. This morning I received a notification that a product I order 3/2021 was in stock. A FMF Exhaust header. I just assumed they canceled the order a long time ago.

 

[2Driver]

I know there are a few folks that have been waiting on some SXS’s for awhile now.

 

[BIGRED9158]

I know there are a few folks that have been waiting on some SXS’s for awhile now.

Lol you made me spit out my beer

 

[JFMFG]

I know there are a few folks that have been waiting on some SXS’s for awhile now.

Oh sheeiiittttt here we go.

 

[Slink]

Waited over a year for Thermador Kitchen appliances.......still didn't have a build/delivery date for the under counter wine fridge so I went with a different brand. It matches close enough and was way cheaper.

 

[Dog]

I know there are a few folks that have been waiting on some SXS’s for awhile now.

I don't think that is a supply chain issue but ...

 

[dread Pirate]

Waited 6 months for Mickey Thompson slicks. Still waiting for BFG's for my truck. Supposedly they'll have em in stock mid March. I've seen several smaller parts companies go under or cancel orders on stuff that isn't selling. Headers for a B20 Honda have become almost non existent for example.

 

[SoCalDave]

I waited 9 months for a new Atlas Copco air dryer at work. Pre Covid this was a stock item but now built to order due to supply chain issues.

 

[Gelcoater]

Waited 6 months for Mickey Thompson slicks. Still waiting for BFG's for my truck. Supposedly they'll have em in stock mid March. I've seen several smaller parts companies go under or cancel orders on stuff that isn't selling. Headers for a B20 Honda have become almost non existent for example.

Can’t hire someone local-ish to just make headers?

 

[Lumpy]

In the pool bizz for 35 years...everything is on backorder.

 

[BIGRED9158]

In the pool bizz for 35 years...everything is on backorder.

Right trying getting a pool light

 

[Racey]

With all of the shutdowns in china lots of input materials, especially aluminum shapes, have been a nightmare to get and are CRAZY expensive. This is the unfortunate snake rearing it's head of gutting your own heavy manufacturing industries.

Like 6 month lead times if your lucky and 4x the price pre covid. Tubing costing like 10-12 dollars a pound when 3 years ago it was between 2 and 3 dollars per lb.

 

[DLC]

LIfe Clue’s have been back ordered for 15 + years… probably longer….

Not sure how some of these people make it through the day! Amazon doesn’t have any…

Starbucks …. Nope ….

 

[NicPaus]

11 months for kitchenaid appliances. Lead time was 17 days when I paid for them. Customers were not happy.

 

[Dog]

11 months for kitchenaid appliances. Lead time was 17 days when I paid for them. Customers were not happy.

In March 2021 when I paid for the header the lead time was around 30 days. Then I was told around 2 months. 2 years later...

 

[golakers]

I know there are a few folks that have been waiting on some SXS’s for awhile now.

Reply of year!

 

[Motor Boater]

We bought 2 chairs over thanksgiving. I get one tomorrow and the other at the end of March. LOL. Lady at the store said that was a great lead time since previously it has taken 9 months to get a chair. WTF??

 

[ibelio]

went to cha bones said please wait to be seated 20 min still waiting she never came back place was empty

 

[bonesfab]

18 months for a set of recaro seats. Customer had to have them.

 

[white tortilla]

With the "supply chain issues" what is the longest you have waited for something to be in stock. This morning I received a notification that a product I order 3/2021 was in stock. A FMF Exhaust header. I just assumed they canceled the order a long time ago.

The FMF stuff has been horrible. Gone through a couple bikes without ever having the correct silencer I wanted being available.

 

[WTR&PWR]

60 weeks for switchgear. And no, they don’t say “one year and two months” or “14 months” they like to say “60 weeks ”

 

[Bobby V]

11 months for kitchenaid appliances. Lead time was 17 days when I paid for them. Customers were not happy.

Thats odd. Was just at Pacific Sales and they said they had my Ktchen Aid stove was in stock. Were these custom products?

 

[Ace in the Hole]

With the "supply chain issues" what is the longest you have waited for something to be in stock. This morning I received a notification that a product I order 3/2021 was in stock. A FMF Exhaust header. I just assumed they canceled the order a long time ago.

Waited a year for a sub zero fridge.... Have products and orders in my industry that are a year out from now...its just what it is.

 

[NicPaus]

Thats odd. Was just at Pacific Sales and they said they had my Ktchen Aid stove was in stock. Were these custom products?

This was over a year ago. I almost bought kitchenaid for another project on black Friday sale. The reviews were horrible. Even the appliance sales manager said not to. They have had nothing but problems lately. But inventory is caught up now. Thinking they might of sped up the process and quality is sacrificed.

 

[white tortilla]

60 weeks for switchgear. And no, they don’t say “one year and two months” or “14 months” they like to say “60 weeks ”

I was on phone with Siemens last week on gear I have on order. Says my stuff is 18mo out. Said thier production capacity is 1/2 of the current orders coming in.

 

[Done-it-again]

Thats odd. Was just at Pacific Sales and they said they had my Ktchen Aid stove was in stock. Were these custom products?

I was shocked shopping for a washer/dryer this weekend past weekend (speed queen) that both places had them in stock.

 

[great_escape]

I've been waiting since July for a TCM for my LML Duramax. GM is estimating delivery as 2nd qtr 23'. One day I'll have a truck again. Last I checked there were over 500 on back order.

 

[Dog]

The FMF stuff has been horrible. Gone through a couple bikes without ever having the correct silencer I wanted being available.

I receiver the muffler like 4 months after ordering. No point in putting the muffler on just to pull it off to put the header on. lol

 

[mjc]

I have been waiting 5 months for bumper bolts, that will fit every GM with a chrome bumper.

 

[LuauLounge]

60 weeks for switchgear. And no, they don’t say “one year and two months” or “14 months” they like to say “60 weeks ”

Expedite available for small additional fee.

 

[GreenEnergy28]

In the pool bizz for 35 years...everything is on backorder.

Waited 7 months for a new Pentair salt cell. Finally received it mid-December. Of course, the water is too cold to produce chlorine now but at least I have it.

 

[rivermobster]

Waiting on some oil pressure sensors in would have normally expected the next day.

Been a few weeks Already.

This is all @Shlbyntro fault!

 

[Shlbyntro]

Waiting on some oil pressure sensors in would have normally expected the next day.

Been a few weeks Already.

This is all @Shlbyntro fault!

nah uh. i said oil pressure switches! lol

 

[TPC]

Suppliers of the few items we've had delays on aren't using the back ordered excuse anymore.
They just take your money and you wait. Estimated delivery date means nothing.

Latest we ordered a TASER Pulse. Was supposed to be here in 5 days,, and that was a month ago. We contact them, only response is it'll soon be shipped.

DJI Drones the same thing. They don't say anything other than it'll be shipped soon. That's since October.

KTM Motorcycle parts? You can forget that. Friends have been waiting since summer.

Sat on one new Motorcycle at the dealer showroom, looked down where the compression release was supposed to be it was gone and a $20 bill stuck in it's place..
Now that's resourceful.

 

[Cobalt232]

6 months to get a German WEG motor. Was supposed to be 4 weeks.

Going on 2 years now for my wife's Bronco and my Speed car.

 

[TPC]

Expedite available for small additional fee.

Grumman 700 Jet $70 Million, for 8 million more you can get your order put on the top of the stack.

 

[TPC]

6 months to get a German WEG motor. Was supposed to be 4 weeks.

Going on 2 years now for my wife's Bronco and my Speed car.

VW EV motors on some EV models are junk, out of production,,, no new available. Owners are screwed. That's VW.

 

[dread Pirate]

Can’t hire someone local-ish to just make headers?

If it was further up the list we could go that route. Just finishing up the suspension on kids car now. He said he can wait on power and wants a stereo next. I'm sure audio equipment won't be in stock either unfortunately.

 

[Lotoguy]

6 months for a mercury oil tank for a 90 hp outboard. Bought one off ebay from a salvage yard and got lucky it worked.

 

[Chili Palmer]

It's a good thing that Biden stopped all the tax exemptions that Trump put in place for the corporations to bring back manufacturing to the US, otherwise we'd be flush with so much product that we'd need extra shifts and people to work to meet the demand. The US economy needed a "break" from all that production and it all went to China and now they are raking us over the coals....

Let's Go Brandon!

 

[Ziggy]

This was over a year ago. I almost bought kitchenaid for another project on black Friday sale. The reviews were horrible. Even the appliance sales manager said not to. They have had nothing but problems lately. But inventory is caught up now. Thinking they might of sped up the process and quality is sacrificed.

Inventory must be improving the way I see the big box home improvement & costco appliance advertisements.

 

[RiverDave]

I know there are a few folks that have been waiting on some SXS’s for awhile now.

Lol

 

[wallnutz]

Waited 8 months for a RHS tall deck block. Now waiting for a crank.

 

[CommanderLee]

Waited 6 months for Mickey Thompson slicks. Still waiting for BFG's for my truck. Supposedly they'll have em in stock mid March. I've seen several smaller parts companies go under or cancel orders on stuff that isn't selling. Headers for a B20 Honda have become almost non existent for example.

Is the header for a 96-00 Civic? I think the B20 can be a 1.6-2.0? If it is for that generation Civic I have them in stock. Shoot me a PM if so.

 

[ChrisV]

Waited 6 months for Mickey Thompson slicks. Still waiting for BFG's for my truck. Supposedly they'll have em in stock mid March. I've seen several smaller parts companies go under or cancel orders on stuff that isn't selling. Headers for a B20 Honda have become almost non existent for example.

Contact DTR racing and he’ll make you a header.

 

[ChrisV]

Is the header for a 96-00 Civic? I think the B20 can be a 1.6-2.0? If it is for that generation Civic I have them in stock. Shoot me a PM if so.

Negative. Deck height is different between the two. Putting the 1.6 header on will smack the pan.

 

[CommanderLee]

Negative. Deck height is different between the two. Putting the 1.6 header on will smack the pan.

Not a Honda guy but now I know why we only list it for the 1.6!

 

[dread Pirate]

Is the header for a 96-00 Civic? I think the B20 can be a 1.6-2.0? If it is for that generation Civic I have them in stock. Shoot me a PM if so.

Thanks it's for a CR-V.

 

[FROGMAN524]

I ordered a new Genie scissor lift in November of 22. Estimated delivery date is December 2024.

 

[Orange Juice]

With the "supply chain issues" what is the longest you have waited for something to be in stock. This morning I received a notification that a product I order 3/2021 was in stock. A FMF Exhaust header. I just assumed they canceled the order a long time ago.

3 months. They need to call me if it’s longer than that.