Anyone have two motors laying around?

[GRADS]

If you do you could have a damn nice boat for under $100K...

https://sacramento.craigslist.org/bod/d/sacramento-2003-nortech-36-supercat/6972894949.html

 

[bagged97taco]

I have a tunnel ram 468 and a Merc 525. Would that be an issue?

 

[GRADS]

I have a tunnel ram 468 and a Merc 525. Would that be an issue?

Not if you like doing circles.

 

[SoCalZero]

Two mild small blocks for a budget channel cruiser.

 

[Flying_Lavey]

Two mild small blocks for a budget channel cruiser.

You should be able to get a couple boat anchors for cheap. I'm sorry, I mean 455 Olds engines. Lol!

Sent from my LM-G710VM using Tapatalk

 

[warlock250]

A couple of Tesla motors might work. [emoji848][emoji848][emoji848][emoji12][emoji12][emoji23]

Sent from my SM-N960U using Tapatalk

 

[GRADS]

Even under powered with say 525's this would still be a sweet boat. hell, even put some 496HO's in that thing.

 

[prosthogod]

Damn, I wish my boat was sold.

 

[renodaytona]

I’ve always like the 36 Nortech’s.

 

[monkeyswrench]

Motors are no problem...hell, I'd slap a couple 454's in there and leave the hatch down. Wouldn't be fast, but would get me from Needles to Havasu in pimp style. Then start saving money for a couple tall deck builds.

 

[Shlbyntro]

Not if you like doing circles.

Nas[boat]

 

[GRADS]

Motors are no problem...hell, I'd slap a couple 454's in there and leave the hatch down. Wouldn't be fast, but would get me from Needles to Havasu in pimp style. Then start saving money for a couple tall deck builds.

That's what I was thinking.

 

[4Waters]

Motors are no problem...hell, I'd slap a couple 454's in there and leave the hatch down. Wouldn't be fast, but would get me from Needles to Havasu in pimp style. Then start saving money for a couple tall deck builds.

I'd go to the junkyard and get a couple 8.1l rings and bearings reverse cam and throw them in.

 

[n2otoofast4u]

I’d like to know what’s included rigging wise. Mounts, shafts, bell housings, accessories, etc. Big question...... headers??? I’ve done a retro from a bare Hull with a drive boat. The “small” shit adds up quick!

 

[gqchris]

I’d like to know what’s included rigging wise. Mounts, shafts, bell housings, accessories, etc. Big question...... headers??? I’ve done a retro from a bare Hull with a drive boat. The “small” shit adds up quick!

Hell yes it does. On my little 19’ rerig it was a ton of small shit that piled up quick!

 

[warlock250]

Those drives eat some HP. So buy it refi the house build a pair of 1200s over a year.

Sent from my SM-N960U using Tapatalk

 

[Dalton]

https://www.riverdavesplace.com/for...0-bulldog-motors-complete-never-fired.169762/

wonder if these are still for sale

 

[lavey jr]

Those drives eat some HP. So buy it refi the house build a pair of 1200s over a year.

Sent from my SM-N960U using Tapatalk

The #6 drive take a lot less HP than you think. Less than a Bravo...

https://www.mercuryracing.com/sterndrive-losses-less-than-you-think/

 

[warlock250]

Put a couple of junkyard 350s in her and cruise the channel like a Baller.

Sent from my SM-N960U using Tapatalk

 

[Bigbore500r]

Buy 2 Jetbotes....remove the 100mph motors - BOOM - Poker run ready

 

[Chestah Cheetah]

Buy 2 Jetbotes....remove the 100mph motors - BOOM - Poker run ready

Two 100MPH jet bote motors would make this tub scream at 200MPH then if I’m doing my math correctly. LOTO Shootout contender?


Sent from my iPhone using Tapatalk

 

[Bigbore500r]

Two 100MPH jet bote motors would make this tub scream at 200MPH then if I’m doing my math correctly. LOTO Shootout contender?


Sent from my iPhone using Tapatalk

Absolutely!

 

[ka0tyk]

I’d like to know what’s included rigging wise. Mounts, shafts, bell housings, accessories, etc. Big question...... headers??? I’ve done a retro from a bare Hull with a drive boat. The “small” shit adds up quick!

small shit x 2...