32 DW in the mold in 2 weeks

[Bullhead bully]

Twin 400s. Start rigging in May.
Awesome people and boats.
Special thanks to Rob and Brian for totally ruining me on the run to the Golden Gate.

 

[Ocean goer]

View attachment 623686 View attachment 623687 View attachment 623688 View attachment 623689 View attachment 623690 View attachment 623691 View attachment 623692 View attachment 623693 View attachment 623694 View attachment 623695 View attachment 623696 View attachment 623697 View attachment 623698 View attachment 623699 View attachment 623700 Twin 400s. Start rigging in May.
Awesome people and boats.
Special thanks to Rob and Brian for totally ruining me on the run to the Golden Gate.

Is this your new boat and what boat did you ride in the 28’ or 30’?


Sent from my iPhone using Tapatalk

 

[DWC]

New Talon, CF Nordic 28SS and now this. That’s not a bad off season. A lot of 400’s for one hanger.
Congrats. Looking forward to seeing the next design.

 

[stoker2001]

went on a run recently in Delta and Dan Ghatto was ripping his new DW 28 or 30?It had 300XS power.Granted it was flat water,but never seen a cat Porpoise that much (and we paced him for miles to 110mph) and was wondering if the 400s would make it worse!!!Just saying,better try befor you buy

 

[lake p.a.l.]

Is this your new boat and what boat did you ride in the 28’ or 30’?


Sent from my iPhone using Tapatalk

He rode in our 308 all day from Delta out under the Gate and back, launched @ B&W that day. It was big water but we had a blast. Kevin was trying to get Brian to turn back.

 

[stoker2001]

He rode in our 308 all day from Delta out under the Gate and back, launched @ B&W that day. It was big water but we had a blast. Kevin was trying to get Brian to turn back.

YA,didnt help that i had recent surgery and should of stayed home..easy for you to say in your battleship..LOL

 

[lake p.a.l.]

YA,didnt help that i had recent surgery and should of stayed home..easy for you to say in your battleship..LOL

Sorry, I didn't know you had surgery before that trip. Our tank didn't mind it too much that day but we aired the props plenty.

 

[Bullhead bully]

went on a run recently in Delta and Dan Ghatto was ripping his new DW 28 or 30?It had 300XS power.Granted it was flat water,but never seen a cat Porpoise that much (and we paced him for miles to 110mph) and was wondering if the 400s would make it worse!!!Just saying,better try befor you buy

I rode in the 32 with 400s on glass water....I loved the ride, had the normal 65-75 hop and then ran flat. Again on flat water. Yeah, I think I’m good. Thanks for the concern Kevin.

 

[F14]

YA,didnt help that i had recent surgery and should of stayed home..easy for you to say in your battleship..LOL

now ya tell us..... I was not aware either

 

[02HoWaRd26]

Can’t wait to see with your paint and graphics on it.

 

[Bullhead bully]

Can’t wait to see with your paint and graphics on it.

I think I’m keeping the graphics quite simple on this one. Probably going to go with a white base with just some basic graphics. I’m afraid to do red. Too hot.

 

[Checkmate21]

Why does the DW drive on the left and the Talon drive on the right? Both boats are incredible!

 

[Bullhead bully]

Why does the DW drive on the left and the Talon drive on the right? Both boats are incredible!

That DW is on the left. I’m probably going on the right.

 

[F14]

Why does the DW drive on the left and the Talon drive on the right? Both boats are incredible!

Most builders will give you the choice of either side.

 

[Motoxxxloak]

So does this mean your eliminator with twins might have a price tag on it


Sent from my iPhone using Tapatalk

 

[shueman]

So does this mean your eliminator with twins might have a price tag on it


Sent from my iPhone using Tapatalk

Rumor is it's taking up "residency" at Powell this season ...

 

[Bullhead bully]

Rumor is it's taking up "residency" at Powell this season ...

That is correct Gary. It will be living at Powell. Probably end of April or beginning of May. As far as a price tag on it. Not likely. I love the old Daytona.

 

[shueman]

That 32' DW is incredible !!

 

[Bullhead bully]

The way they make their plugs is incredible! I’ve never seen anything like it anywhere! Precision CNC router cut foam plug makes it a fully symmetrical plug in every direction. No hand work involved . No human error.

 

[LGETT]

Looking forward to seeing pictures as another great build emerges.....

Congrats Paul

 

[HST4ME]

This will be cool.

 

[SJP]

Most builders will give you the choice of either side.

The boat is rigged dual helm. I am doing a couple of little things right now to make it more user friendly on Havasu. Well placed pincleats by the lockers for buoys etc. I am going back and forth on sea deck strategically placed on the rear entry. It has a strip of non slip but at some point someone is going down. It is nice only having to obsess over these items compared to other boats I have owned. BB - yeah the windshield needs to have a brace / post fabbed. The more I drive the boat the better I like it. I cannot believe the fuel economy and overall efficiency of the boat. It is amazing. Bullhead Bully congrats on the build - thumbs up.

 

[KAP]

The boat is rigged dual helm. I am doing a couple of little things right now to make it more user friendly on Havasu. Well placed pincleats by the lockers for buoys etc. I am going back and forth on sea deck strategically placed on the rear entry. It has a strip of non slip but at some point someone is going down. It is nice only having to obsess over these items compared to other boats I have owned. BB - yeah the windshield needs to have a brace / post fabbed. The more I drive the boat the better I like it. I cannot believe the fuel economy and overall efficiency of the boat. It is amazing. Bullhead Bully congrats on the build - thumbs up.

Reply:

I take it you bought Derron's boat. That 32 was a steal and an incredible boat. Rigged by the one of the best in the business. Every option you could think of was on that boat including a bad azz tow cover that I wish I had invested in from Randy.

Congrats on your new boat. I tried to get several of my friends to buy that boat and they just don't get it....best all around 32 outboard on the planet. Plus you did not have to wait a year to get it....LOL.

Yes I had to brace the windshield as well...that was the only item I did not have a hand in was the windshield and I am still not happy with mine but live with it.

Wait til you drive it in the ocean then you will really see the boat shine. As far as hop goes this is an offshore boat with a true tunnel. They will hop at a certain speed in smooth water but if the water has any chop it will not even be noticeable or a factor. The boat likes to run and cruise at about 100MPH with my 300XS I get 3.3-3.5 MPG which is the norm.

As far as construction of the boat nothing like it pure race lineage throughout the boat.

I am eagerly awaiting the new Outboard from Mercury then I will repower and terrorize the inboard guys even more.

Paul... I told you five years ago about the DW glad you finally pulled the trigger. You will be very happy.

 

[Bullhead bully]

Reply:

I take it you bought Derron's boat. That 32 was a steal and an incredible boat. Rigged by the one of the best in the business. Every option you could think of was on that boat including a bad azz tow cover that I wish I had invested in from Randy.

Congrats on your new boat. I tried to get several of my friends to buy that boat and they just don't get it....best all around 32 outboard on the planet. Plus you did not have to wait a year to get it....LOL.

Yes I had to brace the windshield as well...that was the only item I did not have a hand in was the windshield and I am still not happy with mine but live with it.

Wait til you drive it in the ocean then you will really see the boat shine. As far as hop goes this is an offshore boat with a true tunnel. They will hop at a certain speed in smooth water but if the water has any chop it will not even be noticeable or a factor. The boat likes to run and cruise at about 100MPH with my 300XS I get 3.3-3.5 MPG which is the norm.

As far as construction of the boat nothing like it pure race lineage throughout the boat.

I am eagerly awaiting the new Outboard from Mercury then I will repower and terrorize the inboard guys even more.

Paul... I told you five years ago about the DW glad you finally pulled the trigger. You will be very happy.

Thanks John, I talked to Doug today....really looking forward to it.
Engines are ordered and the Myco is ordered.

 

[lake p.a.l.]

This is gonna be one bad beast in big water and plenty fast on better water. What color(s) will it be ?

 

[Bullhead bully]

White with mild graphics. And white motors.
Time for a change. Mix it up a bit.