Search results

Looking for info on a prop. I believe it's titanium? Picked this up 20+ years ago when I bought on old Hondo / turbo motor package. Looks new and does not appear to have ever been ran. Any feedback would be greatly appreciated.

Heavy duty single motorcycle carrier. Fits standard 2" hitch receiver. Has a ramp, outrigger arms with tie down eyes & lights wired into a standard 5 prong plug. Great for an RV, SUV or truck with shell. Made of heavy wall steel tubing and channel. $200 Located in Chino Hills

Anyone know what PSI it should be? I'm only stating 50 psi due to a YouTube video I watched. Old pump was only producing 35 PSI on the high pressure & only 5-6 on the low PSI side.

Picked up a new pump off Amazon for just over $200. Swapped out the old one & boat seems to run well. Getting 12 PSI off the low PSI side and around 40 on the high PSI side. I read somewhere that the fuel pressure should be around 10 & 50 PSI? Should I be concerned about the 40 PSI? Boat is a...

Despite having been around boats my entire life, this seems like a rookie question but here goes... Boat has 2 batteries and the traditional (off - 1 - 2 - both) battery switch. I was told not to run the boat in the both position because it will damage the alternator? I typically alternate...

Thank you for the feedback

I see several "new" ones offered on ebay in the $200 range? Seller's with 98%+ rating. Are these an option or junk?

Can they be rebuilt? Good source for a replacement?

Looking for a source to test a fuel pump off a 8.1L Volvo Penta. Low pressure fuel pump started making a buzzing noise. Engine idled ok but died shortly after you raised the RPM. Checked the fuel pressure and had zero PSI on the low PSI side & 25 psi on the high pressure side. Next day the...

Need some help with homeowners insurance for our home in Lake Arrowhead. Due to the passing of Prop 19, we had to transfer the ownership of the property and need to secure homeowners insurance. I've contacted a couple agents and just get the runaround. I understand that due to it being in a...

Figured I'd give this one more try. I'd like to get moving on this project ASAP.

Looking to build a 5-6' retaining wall at my home in Chino Hills. Open to a traditional block wall or Allen block. I'd also like to replace the hardscape in my front yard. (driveway, walkways & porch) I've had several people bid the job but when I want to move forward they never follow...

Thanks for all the input! PWC wasn't salvage, owner had title in hand. Trailer is a different story. They informed me that through the recovery process it was salvaged? Going to AAA next week to sort it out. Nice toy for my boys to play around with.

Thanks for the feedback!

Got a friend who had his PWC/Jet Ski stolen. It was recovered but the insurance elected to pay him off instead of paying for the necessary repairs. In the end he ended up with the cash from the insurance and a PWC & trailer that he no longer wants. He has offered it to me and my boys to take on...

Looking for someone in the So Cal area that can repair kevlar. I've got a 1980 20' Spectra that is an all Kevlar layup. It has some cracks in the floor that run parallel with the stringers which are also visible on the bottom side of the boat. Took it to a local glass shop that was highly...

After consulting several experts, I went with F6's. Considerable improvement in all around performance. MAX RPM was 4,400 = 48 MPH with 2 adults & a full tank of fuel. I'd like a little more bottom end so I'm swapping them out for F5's. Lake has a 35 MPH speed limit and boat will rarely see 30+...

In the market for a truck... - 1/2 Ton - crew cab - short bed - 4x4 F-150 would be at the top of my list but would consider a Chevy, GMC or RAM. Going to use it as a second vehicle so hoping to find something in the $8,000-$10,000 range. Might consider spending a little more for the right...

I’ve got a Chapparel 242 Sunest with a 8.1L & type F DPS Drive Currently have a F8 #3851498 prop set Running the boat at higher altitude (5,000’) and the boat is struggling on the bottom end. Max RPM we can achieve is between 3,600-3,800 The operating range on the motor is 4,200-4,600 Need...

Thank you all for the great info! Much appreciated!