UTV Inc full doors for RZR XP4.

[Boat 405]

Who has them? Do you like them or no??
Good price point. Also like that they accept my prp door bags.

What say you guys?

 

[cakemoto]

I’ve herd bad things.they rattle too.
I was told tmw is the only way

 

[Dylan]

I bought TMW also. Although they are ridiculously expensive, they have been solid and never needed adjusting after install. Even my OEM Polaris 900 xp4 doors needed adjustments every few months.


Sent from my iPhone using Tapatalk

 

[Hammer]

I bought TMW also. Although they are ridiculously expensive, they have been solid and never needed adjusting after install. Even my OEM Polaris 900 xp4 doors needed adjustments every few months.


Sent from my iPhone using Tapatalk

X2 on the TMW doors. That’s what I have.


Sent from my iPhone using Tapatalk

 

[cakemoto]

1250 bucks though.I’m actually in the market so if you find a deal on some let me know

 

[LargeOrangeFont]

I think they are overpriced, but the Polaris upgraded door shells are the best.

They are $1k but use the stock door frames and latch (huge plus) and are totally weathersealed. @Bpracing1127 has these.

https://rzr.polaris.com/en-us/shop/accessories/doors/2879943/

Also check out the UTV Giant full doors, they look decent and are $700. They are probably not the best, but are good for the price.

I have the UTV Giant lower aluminium doors. They don’t rattle, but took a little door adjustment to get them lined up perfectly. The door gaps do let in a surprising amount of dust!

 

[HB2Havasu]

Triumph Motorsports has some good looking doors for $599 that I’m going to pickup for my XP1K4 after the holidays.

 

[grumpy88]

Nobody uses pro armour ?

 

[575cat]

Just picked up a 13 RZR with pro armer doors on it they are nice and built well no rattles .

 

[lavey jr]

Don't forget about Lavey Craft. They make a good variety of Polaris stuff and other SxS parts. If you are still using the Polaris stock factory door mounts and swing mechanism their doors are a great option that do not rattle at all and they accept the PRP door bags! Gel coat and fiberglass built exactly like their boats.

https://www.laveycraft.com/offroad-polarisrzr/

 

[Gelcoater]

Don't forget about Lavey Craft. They make a good variety of Polaris stuff and other SxS parts. If you are still using the Polaris stock factory door mounts and swing mechanism their doors are a great option that do not rattle at all and they accept the PRP door bags! Gel coat and fiberglass built exactly like their boats.

https://www.laveycraft.com/offroad-polarisrzr/

The color on the blue car looks a mile deep in person.

 

[Bigbore500r]

I threw on some $129 lower metal inserts. Can't hear any rattles, keeps the mud and most of the dust off my legs. Amazon Prime racing baby

 

[robby dmax]

I have the polaris full doors after they have been adjusted they are pretty nice close easy no slamming.

 

[LargeOrangeFont]

I threw on some $129 lower metal inserts. Can't hear any rattles, keeps the mud and most of the dust off my legs. Amazon Prime racing baby

Truth. Between that and the Home Depot Racing department I am covered.

 

[Performance Grips]

Sdr motorsports. They are pricey but the best.

 

[cakemoto]

They are the same doors utv ink and giant.

 

[jesco]

I had the SDR doors on my rzr, NICE but spendy and you have to zip tie PRP bags on (they sell their bags if you don't already have PRPs). My buddy has the Pro Armor Stealth doors, really nice and bolt onto stock frame. Assault Ind makes really nice stuff also and usually priced fair.

 

[Englewood]

Triumph Doors for $599, work great no rattle.

 

[rickym20]

Any one try the Toys for Big boys (TFBB) doors? I have their cage but hadn’t heard how the doors work out.

 

[THE WIDGE]

Triumph Doors for $599, work great no rattle.

X2, I have all 4 and no raddles, open close easily, had them four a year now

 

[FlyByWire]

Another vote for TMW.

I vinyl lined the inner doors and the roof and there’s zero noise at all from either.

For what it’s worth, toys for big boys copied the TMW doors the best they could.... and toys for big boys builds nearly EVERYTHING for Triumph.

 

[Boat 405]

Sweet thanks guys. Gonna look into tmw. I saw the sdr doors but they don’t accept the prp bags.

 

[Boat 405]

I like the TMW doors but after looking at their video. Do you need their cage? The video shows a center hinge setup that looks welded to their cage? Anybody?

 

[FlyByWire]

I like the TMW doors but after looking at their video. Do you need their cage? The video shows a center hinge setup that looks welded to their cage? Anybody?

Nope, do not need their cage. Center hinge bolts on.

 

[Boat 405]

Nope, do not need their cage. Center hinge bolts on.

Cool, thank you

 

[270]

Most people are going to say whatever they have are the best but buy what you like best. Whatever you decide go with a liner, it'll cut out that tin can sound.

Over the years I've had UTV, TMW and Dragonfire doors and if you install them correctly most will not rattle or come out of adjustment.

This is my third set of UTV doors because I like their fit and finish best compared to others but that's just personal preference.

Happy Trails.

 

[rivrrts429]

Another option. You’ll have to find out if they’ll except the PRP bags [emoji16]

https://www.prpseats.com/product-category/exterior-accessories/doors/

 

[Boat 405]

Cool, I think I'm gonna go with TMW doors and their bags.

 

[Boat 405]

Anyone know a good source for graphics that aren’t $500. Lol. Just something to match up to the factory graphics

 

[LargeOrangeFont]

I can tell you GatorWraps was oppressively expensive to do the inserts on the stock doors in a single color.

I bought enough 3M material to do the job twice in case I messed up for under $30 shipped. They wanted $430.

 

[DEEZNUTS]

Kombustion motorsports has pretty good discount on SDR products coming up as a 12 days of Christmas thing, if you are on the email list. Might pick up some doors.