Stolen 32 Schiada. "Stars and Stripes"

[Done-it-again]

It’s in the works. Just trying not to kill myself from over working.

I just don't know where you find the time now...

You should start a thread on the car work you do.... like who needs a roll cage in an Audi.

 

[Justsomeguy]

I just don't know where you find the time now...

You should start a thread on the car work you do.... like who needs a roll cage in an Audi.

The Porsche is one of my favorites in his shop. The nova? Pretty sure it was a nova, could have been a chevelle, is pretty bad ass also. I have to remind myself he's working and I should stop disturbing him and leave. But you just want to look at it all.

 

[Done-it-again]

The Porsche is one of my favorites in his shop. The nova? Pretty sure it was a nova, could have been a chevelle, is pretty bad ass also. I have to remind myself he's working and I should stop disturbing him and leave. But you just want to look at it all.

pretty sure that last photo I saw was a roll cage in a Audi, at least the steering wheel has the rings on it.

Never been to his shop, just see what he posts...

 

[RogerThat99]

Found it

32' Schiada Offshore theft recovery - boats - by owner - marine sale - craigslist

2001 Schiada 32' Offshore theft recovery boat. No motors or drives. Has Imco standoff housings. K plates. Imco hydraulic steering. Needs upholstery redone but is all there. All hydraulic pumps for...

inlandempire.craigslist.org

I just looked at this thread yesterday to see if there were any updates. Glad to see it was recovered, and resolved.

 

[Justsomeguy]

pretty sure that last photo I saw was a roll cage in a Audi, at least the steering wheel has the rings on it.

Never been to his shop, just see what he posts...

There is an audi also. A lot of cool cars Chris works on. Plenty of GTRs. While they are all different and it's cool to see him tear into 2 gtr transmissions at once. The odd balls are my favorite.

Strange enough, I have not seen his boat in person though. @ChrisV what's up with that? Lol

 

[NicPaus]

That's a steal of a price!

 

[Motoxxxloak]

Curious to know what other boats you all have onsite that are for sale

 

[ChrisV]

pretty sure that last photo I saw was a roll cage in a Audi, at least the steering wheel has the rings on it.

Never been to his shop, just see what he posts...

Audi TTRS. Makes 1300awhp. He’s trying to go 7.9 in the 1/4. It’s one of the last few cars I’m working on. Will only be GTRs from now on.

Login • Instagram

Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.

www.instagram.com

 

[ChrisV]

There is an audi also. A lot of cool cars Chris works on. Plenty of GTRs. While they are all different and it's cool to see him tear into 2 gtr transmissions at once. The odd balls are my favorite.

Strange enough, I have not seen his boat in person though. @ChrisV what's up with that? Lol

We’ll go this season. Promise 🫶

 

[boatpi]

After 5+ years the stolen status is deleted from ncic. At that point the report agency should be trying to locate the owner and confirming that they did not
Locate it. Then it is re entered back into ncic for another 5 years. There is a database that le can access that never deletes.

 

[farmo83]

I agree RD needs to sell the Hallett and fix this old girl up.

 

[evantwheeler]

impound fees, towing fees, boat transfer fees and two months storage fees. We now are offing the boat for sale at what the fees would of been.

This all adds up to $20k?

on edit. Its a free market, risk vs. reward, blah blah blah. My point is the above does not add up to $20k unless you're grossly exponentially inflating the numbers. "We are offering the boat for sale at what the fees would have been" is just disingenuous.

 

[rivergames]

Rebuild the Transom and add 3) 450's

 

[sintax]

This all adds up to $20k?

i'm in the wrong business!

 

[Bajastu]

This all adds up to $20k?

That's exactly what I was thinking. My Schiada was stolen in Dec / 2023 and I can only imagine what the fees will be if and when it surfaces from the thieves. The cops have a solid lead on it but they can’t find the boat, just evidence of the theft and pictures in a guy's cell phone of my boat torn apart on someone's property. Thieves suck!!!!!

 

[hallett21]

Rebuild the Transom and add 3) 450's

Twin 500s would be interesting.

But id keep it I/O

 

[ChrisV]

Twin 500s would be interesting.

Let’s not make the boat worse than it is…

 

[hallett21]

Let’s not make the boat worse than it is…

I edited I edited lol

 

[Bajastu]

Twin 500s would be interesting.

But id keep it I/O

The standoffs would be huge to clear the integrated swinstep. Plus, is that transom built to handle 1,400+ lbs ?

 

[ChrisV]

The standoffs would be huge to clear the integrated swinstep. Plus, is that transom built to handle 1,400+ lbs ?

Whoever buys this will rebuild the whole entire boat. It’s the Schiiiiada way.

 

[dread Pirate]

Whoever buys this will rebuild the whole entire boat. It’s the Schiiiiada way.

Boat would be really cool with Teague 850's and setup for Catalina ski races.

 

[FROGMAN524]

Lee should buy it back and rebuild it and then sell it. Otherwise I’m not sure you’ld ever get your money back out of it.

 

[hallett21]

Lee should buy it back and rebuild it and then sell it. Otherwise I’m not sure you’ld ever get your money back out of it.

If you get it for 20 I feel like you could finish it for 200? Assuming you paid for everything through vendors.

That’s gotta be a 50k hull from Schiada today?

 

[FROGMAN524]

If you get it for 20 I feel like you could finish it for 200? Assuming you paid for everything through vendors.

That’s gotta be a 50k hull from Schiada today?

When you can buy a nearly equal 335 Hallett for under $100,000, you’re not getting your money back on this. If you bought the hull/shell for $20,000, interior is $30,000+, motors and drives are $100,000+ and then gel work, new trailer and gauges and everything else you’re over $200,000 I believe.

 

[Cole Trickle]

If you get it for 20 I feel like you could finish it for 200? Assuming you paid for everything through vendors.

That’s gotta be a 50k hull from Schiada today?

The old 250k = 125k boat deal

 

[n2otoofast4u]

Crush it and start over! There is nothing worth saving in that resin bucket!

 

[hallett21]

When you can buy a nearly equal 335 Hallett for under $100,000, you’re not getting your money back on this. If you bought the hull/shell for $20,000, interior is $30,000+, motors and drives are $100,000+ and then gel work, new trailer and gauges and everything else you’re over $200,000 I believe.

The old 250k = 125k boat deal

Lol look if you wanted a 32 Schiada it’s a good deal.

What are there? 13 of them? lol.

 

[bonesfab]

The old 250k = 125k boat deal

Common core math.

 

[FROGMAN524]

Lol look if you wanted a 32 Schiada it’s a good deal.

What are there? 13 of them? lol.

True, a diehard Schiada guy wouldn’t care about the loss of value on their steep investment. After all, boats are usually depreciating assets unless they’re 2005 Magic 28 Deck boats.

 

[Backlash]

Such a crazy story! I'd imagine all this crazy history could add a few dollars to the asking price. If a person could rebuild this boat "Efficiently," they could probably break even and have something pretty rare.

 

[steamin rice]

When you can buy a nearly equal 335 Hallett for under $100,000, you’re not getting your money back on this. If you bought the hull/shell for $20,000, interior is $30,000+, motors and drives are $100,000+ and then gel work, new trailer and gauges and everything else you’re over $200,000 I believe.

That's the challenge with something like this - The cost to put it back together is more than it's worth unless someone had to have a 32' Schiada and nothing else. It's hard to make the numbers work unless someone already has power/drives and the ability to do all/most of the labor themselves.

 

[MonkeyButt70]

Impounding fees is legal extortion.

 

[Leadfootracing]

The AZ registration number was not in the system. The hull number was altered. The boat was documented when the last owner bought it before it was stolen but the owner never carved the coast gaurd reg number into the bulk head or stringer so no number could not be found.

 

[hallett21]

The AZ registration number was not in the system. The hull number was altered. The boat was documented when the last owner bought it before it was stolen but the owner never carved the coast gaurd reg number into the bulk head or stringer so no number could not be found.

So 20k takes it? With a new title?

 

[Deckin Around]

The insurance company has paid all the impound fees with my recovered stolen vehicles.

 

[RiverDave]

So 20k takes it? With a new title?

Yes I believe so.. most states don’t have a salvage title either so if ca does just register in as and good to go..

RD

 

[Leadfootracing]

Yes $20k buys the boat with new clean title. I have found 550-650hp motors for $20k pair and bravo XR drives for $15k pair. Good upholstery shops can do the outside seats for $6k and new inside cushions for $4k. Gel coat is still like new just needs buffing. I can get like new trailer for $10k

 

[4Waters]

Yes $20k buys the boat with new clean title. I have found 550-650hp motors for $20k pair and bravo XR drives for $15k pair. Good upholstery shops can do the outside seats for $6k and new inside cushions for $4k. Gel coat is still like new just needs buffing. I can get like new trailer for $10k

That's s 100k

 

[NicPaus]

That's s 100k

What would it be new now with a 21 costing $300K?

 

[4Waters]

What would it be new now with a 21 costing $300K?

IDK, a lot

 

[rivrrts429]

That's s 100k

That’s the cheap part. The labor, like a job site, is likely the greatest cost of the entire project.

 

[Done-it-again]

It could pencil out if you had a boat shop that had parts to use then flip it.

 

[Deckin Around]

What would it be new now with a 21 costing $300K?

Curious what could it sell for now turnkey with the used motors and XR drives referred above? more than $100k?

 

[Leadfootracing]

These 32' Schiada boats sell for no less than $200k. I have labor shops that can do all the work for around $10k
Motors I found are fresh and so are the drives. New upholstery and like new aluminum trailer. It's a $200- $250k boat

 

[NicPaus]

Curious what could it sell for now turnkey with the used motors and XR drives referred above? more than $100k?

I would say around $120-135k. A better Gel scheme maybe more. I have a Friend that rigs boats for a living that could help me. But I am buried with jobs and got to many construction projects of my own taking up all my money.

 

[Deckin Around]

These 32' Schiada boats sell for no less than $200k. I have labor shops that can do all the work for around $10k
Motors I found are fresh and so are the drives. New upholstery and like new aluminum trailer. It's a $200- $250k boat

Yes $20k buys the boat with new clean title. I have found 550-650hp motors for $20k pair and bravo XR drives for $15k pair. Good upholstery shops can do the outside seats for $6k and new inside cushions for $4k. Gel coat is still like new just needs buffing. I can get like new trailer for $10k

So you’re saying you can get it turnkey on a trailer for $65k after I buy it for $20,000.

 

[ToMorrow44]

These 32' Schiada boats sell for no less than $200k. I have labor shops that can do all the work for around $10k
Motors I found are fresh and so are the drives. New upholstery and like new aluminum trailer. It's a $200- $250k boat

Sorry but, no they don’t. The last few that have actually sold have been in the $100-150k range. You’re talking used motors, drives, and a junk trailer…that’s not going to be appealing to a Schiada owner.

This is one of those projects where you take what you think it’ll cost and double it. Especially if you want to do it right.

 

[Leadfootracing]

Sorry but, no they don’t. The last few that have actually sold have been in the $100-150k range. You’re talking used motors, drives, and a junk trailer…that’s not going to be appealing to a Schiada owner.

This is one of those projects where you take what you think it’ll cost and double it. Especially if you want to do it right.

I think your not reading good. I said fresh motor and drives. New upholstery and a like new trailer. Do your research.

 

[Leadfootracing]

So you’re saying you can get it turnkey on a trailer for $65k after I buy it for $20,000.

I would say $80k. Plus boat purchase.

 

[FCT]

These 32' Schiada boats sell for no less than $200k. I have labor shops that can do all the work for around $10k
Motors I found are fresh and so are the drives. New upholstery and like new aluminum trailer. It's a $200- $250k boat

With those margins it Sounds like you better rig that thing and flip it!!!!!!!