sandshark1
Well-Known Member
- Joined
- May 15, 2023
- Messages
- 451
- Reaction score
- 632
What broke on the Can Am? The owner has an interesting tire and wheel choice. Must have horrible steering feedback with those wide off-set wheels.
What broke on the Can Am? The owner has an interesting tire and wheel choice. Must have horrible steering feedback with those wide off-set wheels.
Those Keller ball joints are nice, but you have to keep on top of them to make sure everything is tight. My friend broke two of them in Glamis.Look into the Keller Ball joints they are rebuildable w/ new internals! Life Time warranty super ATV ! No pounding and no snap ring to mess with
They also sell rebuild kits….
1 1/4 socket removes the gold cap pop in new stud & ball cap - thread in the gold cap & adjust the tension on the stud 45 -1 hour tops !
View attachment 1439947
View attachment 1439948
Dave what was the actual electrical issue they found, and what was the fix?
The guy who blew the belt in 10 miles with a new engine. Did he have any more belt issues? If so he needs to see if the motor trans alignment is right. I have not done an alignment on a turbo S and it uses shims. Im told it’s very important to follow a bolt pattern sequence and torque on the rear cover and use an alignment bar to make sure it does not change when tightening everything down.
As far as ball joints, I made my own portable press using a modified C clamp, and a piece of tubing. I’ve never broke a ball joint, or changed one in the field, but I did use my homemade tool at home to make sure it worked and it worked like a champ! Without any other damage, I’m guessing 45 min in the field to swap it out.
What broke on the Can Am? The owner has an interesting tire and wheel choice. Must have horrible steering feedback with those wide off-set wheels.
Maybe if they put less money in a stereo and more in maintenance they wouldn’t have to lol.Just want to say we haven’t wrenched in my shit like this! @Bpracing1127
Keep on hating turbo.. if you were here I’d tow you too!
View attachment 1440145
First thing I noticed. Have to wonder what how the car is maintained when you see that.What broke on the Can Am? The owner has an interesting tire and wheel choice. Must have horrible steering feedback with those wide off-set wheels.
Holy offset. I had 3/2 methods and switched to 4/1 offset.First thing I noticed. Have to wonder what how the car is maintained when you see that.
speed had one small electrical issue after getting drenched with salt water..
View attachment 1439930 View attachment 1439931 View attachment 1439932 View attachment 1439933 View attachment 1439934
Maybe we can drag Scott down there for the race.Appreciate it @sandshark1 . I’m not big on being on camera but this film crew is pretty good so it should be a fun watch when completed.
Those Keller ball joints are nice, but you have to keep on top of them to make sure everything is tight. My friend broke two of them in Glamis.
LMAO!!! I was going to ask if the owner hit every accessory isle at Pep Boys.That’s my father in law he bought it at government auction out of Puerto Rico for like 25k.. it’s got a monster stereo and more bullshit on it than any car I have ever seen.. lol. Bypass exhaust you name it.. electric windshield it’s actually pretty fine for a Florida or PR special.
The wheel and tire are mexi special for sure but I gotta admit they have done exceptionally well in the sand down here!
That is a slick way to store the ball joints. The Keller ball joints work as long as you are on top of them maintenance wise.I had over 6,000 miles on my original set !
I keep a full set in the car as back up ! 2 upper & 2 lower, red lube, anti sieze & a KITCHEN SINK W/ disposal… JIC !! [
Ball joint spares
View attachment 1440196
Lube capsules anti sieze & red tacky grease
View attachment 1440197
Maybe we can drag Scott down there for the race.
View attachment 1440507 View attachment 1440508 View attachment 1440509 View attachment 1440510 View attachment 1440511 View attachment 1440512 View attachment 1440513 View attachment 1440514 She’s all back together and off for the first ride of the season!
No, I get to stay home and mow the lawn, the boy gets to go play and get it dirtyWAY to clean. Go get that freakin thing dirty!!!
No, I get to stay home and mow the lawn, the boy gets to go play and get it dirty
I plan on running it in November, that's when our trip is planned for now.Now that its cooling down, anyone run their car in the dunes with the speed key? Would love to hear from one of the owners.
Thats awesome, would love to see a review from an actual owner. Speed key + dunes = ???I plan on running it in November, that's when our trip is planned for now.
Why is the driver dumb?Saw this on FB from the comments it looked like the car held up great nothing broken or bent, the driver is dumb though:
39K views · 40 reactions | Joe | Facebook
www.facebook.com
Why is the driver dumb?
Also looking at the other vehicle on the hill when the Speed starts to roll. It’s a wadded up Mav R. Front end looks broken, and the rear wheel assembly is ripped off and partially down the hill.
I wonder if the Speed was going up to look at it and got sideways on the hill and started rolling? View attachment 1444052
What Happened to Forest Gump ( Mav R ) ?
Big Jump?
Slammed into some parked cars, Mav folded up. Heard passenger was injured badly, driver may have been drunk, car was then stripped overnight.
But the weather was great.
You gotta wonder about these people stripping cars in the middle of the night.. how do they even find them let alone drag tools etc to do midnight work on shit
Maybe friends or some people that saw it and decided to comeback at night. I have seen a few stripped out cars in Glamis.You gotta wonder about these people stripping cars in the middle of the night.. how do they even find them let alone drag tools etc to do midnight work on shit
Why is the driver dumb?
Also looking at the other vehicle on the hill when the Speed starts to roll. It’s a wadded up Mav R. Front end looks broken, and the rear wheel assembly is ripped off and partially down the hill.
I wonder if the Speed was going up to look at it and got sideways on the hill and started rolling? View attachment 1444052
What did I point out? The obvious? It’s a Can Am that was wreaked? Would you feel better if o called it something else that it’s not?You sure like to point that out. LOL!
On a positive note the Speed doors did not fly open when it was rolling and the passengers were not injured.
What Joe said!
The door did openYou sure like to point that out. LOL!
On a positive note the Speed doors did not fly open when it was rolling and the passengers were not injured.
I did not see it open in that video, but I could be blind. LOl!The door did open
What did I point out? The obvious? It’s a Can Am that was wreaked? Would you feel better if o called it something else that it’s not?
Yep lots of Speed doors have opened up. Guys racing the D38 race this weekend had a door popped open a few times.
The latching system is an issue, has happened a bunch of times and in some rolls too like Max at KOH.People just not shutting the doors or is there an issue with the latching system on the Speed doors?
The door did open
The driver door opens at the start of the video or it could have been that the driver could have been closing the door when it starting rolling.I watched that video a bunch of times and never saw a door open
Yes sir.Thats awesome, would love to see a review from an actual owner. Speed key + dunes = ???
Running paddles right?
X2I watched that video a bunch of times and never saw a door open
It was real quick right at the start and then it closed. As long as the guy didn’t fall out, it really shouldn’t matter .I watched that video a bunch of times and never saw a door open
Haters gonna hate
Haters gonna hate
Did you miss the Rusty at ultra thread?Id be doing more that just hating, if Speed had my money for over five years.
If this was a boating company pulling this shit? Can you imagine what people would say??