WELCOME TO RIVER DAVES PLACE

Speed UTV take 3

pixrthis

pixrthis

Well-Known Member
Joined
Jun 20, 2008
Messages
2,191
Reaction score
5,586
screwball said:
I just took Delivery of my new El Jefe. Gonna go sweat my nuts off this weekend in Cal City to put some miles on it. They need to straighten out a couple of little things like the weird dual light bars. They have been pretty cool during the whole process. So far, so good....
Click to expand...
We’ve been kicking around a night ride in Cal City this Saturday. Eat a good meal on the way out and bounce around the desert for a couple hours in the dark with some stops in the middle of nowhere. Headed home by one or two.
 
Boatymcboatface

Boatymcboatface

Well-Known Member
Joined
Sep 28, 2019
Messages
2,801
Reaction score
5,609
rivermobster said:
Agree and disagree...

It IS a great place for a dirt bike, but there also shit tons of dirt roads through Monache Meadows and up into the Golden Trout Wilderness.

I'd much rather be crossing through the Kern River, than roasting my azz around the upper deserts! 😱

There is almost no moon out right now, so night rides will be super sketchy.

Just my 2 cents. I've been to both places once or twice. 😉
Click to expand...
Please don’t recommend people take SXS to Kennedy meadows.


Please!?!
 
rivermobster

rivermobster

Club Banned
Joined
Dec 28, 2009
Messages
59,363
Reaction score
59,767
Boatymcboatface said:
Please don’t recommend people take SXS to Kennedy meadows.


Please!?!
Click to expand...

I wouldn't worry about it. Most people won't attempt the drive up there.

That's what has kept it how it's been for so long...

It's a very difficult place to get to.
 
S

sandshark1

Well-Known Member
Joined
May 15, 2023
Messages
451
Reaction score
632
rivermobster said:
Agree and disagree...

It IS a great place for a dirt bike, but there also shit tons of dirt roads through Monache Meadows and up into the Golden Trout Wilderness.

I'd much rather be crossing through the Kern River, than roasting my azz around the upper deserts! 😱

There is almost no moon out right now, so night rides will be super sketchy.

Just my 2 cents. I've been to both places once or twice. 😉
Click to expand...

Weather is for sure nicer in that area this time of year. But this weekend the weather in Cal City area is supposed to be 90ish which is tolerable.
 
zhandfull

zhandfull

Well-Known Member
Joined
Apr 20, 2008
Messages
3,098
Reaction score
4,674
Another spot for sale. Anyone have a guess how far out till delivery?
IMG_4213.png
 
S

sandshark1

Well-Known Member
Joined
May 15, 2023
Messages
451
Reaction score
632
zhandfull said:
Another spot for sale. Anyone have a guess how far out till delivery?
View attachment 1427858
Click to expand...

Depends on whether that car is stuck in purgatory at the port and was part of the containers being held by customs. I would think that low of a number is either being built now or is on a ship heading this way.

Might be able to call Speed and see where it is.
 
E

EdoublE

Member
Joined
Mar 6, 2023
Messages
8
Reaction score
13
sandshark1 said:
Depends on whether that car is stuck in purgatory at the port and was part of the containers being held by customs. I would think that low of a number is either being built now or is on a ship heading this way.

Might be able to call Speed and see where it is.
Click to expand...
Speed is not so great at knowing where cars are located.
 
D

DLC

Well-Known Member
Joined
Jan 18, 2013
Messages
10,891
Reaction score
16,311
At this point…..

I think, I would rather wait out another season before I would want a Speed Car

Hopefully by then,
They will have all the issues worked out & a bunch cars will Then have 2, 3, 4,000 + miles on em to see how reliable they are
 
rivermobster

rivermobster

Club Banned
Joined
Dec 28, 2009
Messages
59,363
Reaction score
59,767
DLC said:
At this point…..

I think, I would rather wait out another season before I would want a Speed Car

Hopefully by then,
They will have all the issues worked out & a bunch cars will Then have 2, 3, 4,000 + miles on em to see how reliable they are
Click to expand...

You spelled "five years" wrong.

Oh, wait...

😁
 
DirtyWhiteDog

DirtyWhiteDog

Well-Known Member
Joined
Feb 16, 2013
Messages
1,088
Reaction score
1,166
I don't have a dime in this game but, for the last 3 Saturday's I've seen 3-5 each new speed cars on 5th wheel car haulers heading north towards Vegas on hwy 95 around cal-nv-ari , searchlight.
 
  • Like
Reactions: DLC
RiverDave

RiverDave

In it to win it
Joined
Sep 13, 2007
Messages
126,148
Reaction score
164,257
Bigbore500r said:
Whats the radiator fix?
Click to expand...

Morgan motorsports basically puts a CBR oil cooler in the front of the car and then a larger roof scoop to fix the negative pressure in the cab. Hollander also makes a "lift kit" for the radiator itself that closes the gap between the fans and the shroud.

My solution is just put all of it on there.. LOL. New misalignments heims, radiator lift kit, vented clutch cover, then have Morgan do all his magic.. After that I'll do the eibach springs.. I still need to adjust my brake clevis deal and I'd like to change the break pads to something that works better.. but we will be fine for san Felipe with the current springs and brakes for now. That will be done when we get home.

RD
 
RVRKID

RVRKID

Well-Known Member
Joined
Oct 17, 2007
Messages
6,364
Reaction score
6,736
EdoublE said:
Speed is not so great at knowing where cars are located.
Click to expand...
www.instagram.com

THEQUALIFIEDCAPTAIN on Instagram: "On Tuesday, this container ship hit the Willemsbrug bridge in Rotterdam, Netherlands. The captain apparently failed to calculate the air draft which missjudged the vertical clearance to pass safely under the bridg

18K likes, 625 comments - thequalifiedcaptain on September 13, 2024: "On Tuesday, this container ship hit the Willemsbrug bridge in Rotterdam, Netherlands. The captain apparently failed to calculate the air draft which missjudged the vertical clearance to pass safely under the bridge. They...
www.instagram.com www.instagram.com
 
rivermobster

rivermobster

Club Banned
Joined
Dec 28, 2009
Messages
59,363
Reaction score
59,767
RiverDave said:
Morgan motorsports basically puts a CBR oil cooler in the front of the car and then a larger roof scoop to fix the negative pressure in the cab. Hollander also makes a "lift kit" for the radiator itself that closes the gap between the fans and the shroud.

My solution is just put all of it on there.. LOL. New misalignments heims, radiator lift kit, vented clutch cover, then have Morgan do all his magic.. After that I'll do the eibach springs.. I still need to adjust my brake clevis deal and I'd like to change the break pads to something that works better.. but we will be fine for san Felipe with the current springs and brakes for now. That will be done when we get home.

RD
Click to expand...

Be safe. 🙏
 
S

screwball

Well-Known Member
Joined
May 6, 2008
Messages
106
Reaction score
56
RiverDave said:
Morgan motorsports basically puts a CBR oil cooler in the front of the car and then a larger roof scoop to fix the negative pressure in the cab. Hollander also makes a "lift kit" for the radiator itself that closes the gap between the fans and the shroud.

My solution is just put all of it on there.. LOL. New misalignments heims, radiator lift kit, vented clutch cover, then have Morgan do all his magic.. After that I'll do the eibach springs.. I still need to adjust my brake clevis deal and I'd like to change the break pads to something that works better.. but we will be fine for san Felipe with the current springs and brakes for now. That will be done when we get home.

RD
Click to expand...
You were right, It only worked without the windshield. The biggest issue was the belt temp. The car is aweome wihen it runs!
 
N

night9

New Member
Joined
Sep 20, 2023
Messages
1
Reaction score
2
My number got called and is in to be picked up in the next week or two. That being said I have an extra CBR oil cooler to use. Does anyone know what size sandwich plate to order / what threads their filter uses? Nothing against Morgan’s design but I already have the cooler and I think I’ll just rear mount mine.
 
A

Albacore

Well-Known Member
Joined
Dec 9, 2022
Messages
224
Reaction score
426
night9 said:
My number got called and is in to be picked up in the next week or two. That being said I have an extra CBR oil cooler to use. Does anyone know what size sandwich plate to order / what threads their filter uses? Nothing against Morgan’s design but I already have the cooler and I think I’ll just rear mount mine.
Click to expand...
If you go over to this forum and check out this thread, I believe post 211. You will see there are some guys that are now starting to do their own. You could get some answers over there on the fitting sizes and some of the other stuff. I hope that helps.


On another note, I had my car out this weekend and had a great time. Over the last month, I got all the shit wired that I added on my own. finish the bumpers front and rear even made a little bit better front skid plate after clobbering and a giant rock this weekend. Got my storage rack more or less done in the back. I just have to build the box I’m going to attach to it. Trying to make Barstow California 300 in two weeks for some more break in and shock adjustments as I had down south do the springs.
IMG_8571.jpeg
IMG_8447.jpeg
IMG_8609.jpeg
IMG_8610.jpeg
IMG_8529.jpeg
IMG_8528.jpeg
 
zhandfull

zhandfull

Well-Known Member
Joined
Apr 20, 2008
Messages
3,098
Reaction score
4,674
Saw a load of cars heading WB 60 early this morning towards Riverside.
 
D

DLC

Well-Known Member
Joined
Jan 18, 2013
Messages
10,891
Reaction score
16,311
Albacore said:
If you go over to this forum and check out this thread, I believe post 211. You will see there are some guys that are now starting to do their own. You could get some answers over there on the fitting sizes and some of the other stuff. I hope that helps.


On another note, I had my car out this weekend and had a great time. Over the last month, I got all the shit wired that I added on my own. finish the bumpers front and rear even made a little bit better front skid plate after clobbering and a giant rock this weekend. Got my storage rack more or less done in the back. I just have to build the box I’m going to attach to it. Trying to make Barstow California 300 in two weeks for some more break in and shock adjustments as I had down south do the springs. View attachment 1429395 View attachment 1429396 View attachment 1429397 View attachment 1429398 View attachment 1429399 View attachment 1429400
Click to expand...


I’m digging your jack mount ! I was thinking about doing the same thing !

Sweet set up !
 
rivermobster

rivermobster

Club Banned
Joined
Dec 28, 2009
Messages
59,363
Reaction score
59,767
night9 said:
My number got called and is in to be picked up in the next week or two. That being said I have an extra CBR oil cooler to use. Does anyone know what size sandwich plate to order / what threads their filter uses? Nothing against Morgan’s design but I already have the cooler and I think I’ll just rear mount mine.
Click to expand...

Welcome and congrats! What number were you if you don't mind me asking?
 
evantwheeler

evantwheeler

Well-Known Member
Joined
Dec 27, 2015
Messages
2,906
Reaction score
5,624
Albacore said:
If you go over to this forum and check out this thread, I believe post 211. You will see there are some guys that are now starting to do their own. You could get some answers over there on the fitting sizes and some of the other stuff. I hope that helps.


On another note, I had my car out this weekend and had a great time. Over the last month, I got all the shit wired that I added on my own. finish the bumpers front and rear even made a little bit better front skid plate after clobbering and a giant rock this weekend. Got my storage rack more or less done in the back. I just have to build the box I’m going to attach to it. Trying to make Barstow California 300 in two weeks for some more break in and shock adjustments as I had down south do the springs. View attachment 1429395 View attachment 1429396 View attachment 1429397 View attachment 1429398 View attachment 1429399 View attachment 1429400
Click to expand...
Beautiful work! Bitchen ride. Love the bumpers, both look to be made of aluminum?
 
A

Albacore

Well-Known Member
Joined
Dec 9, 2022
Messages
224
Reaction score
426
evantwheeler said:
Beautiful work! Bitchen ride. Love the bumpers, both look to be made of aluminum?
Click to expand...
Yeah, the bumpers are both aluminum and so is the storage rack in the back also the skid plate on the front side is aluminum but on the bottom underneath the bulkhead or front diff whatever you wanna call it that is quarter inch steel to replace the stock plastic skid plate. The aftermarket skid plate is twice as thick, but I did not get that.
 
rivrrts429

rivrrts429

Arch Stanton...
Joined
Jan 4, 2008
Messages
21,311
Reaction score
45,840
Albacore said:
If you go over to this forum and check out this thread, I believe post 211. You will see there are some guys that are now starting to do their own. You could get some answers over there on the fitting sizes and some of the other stuff. I hope that helps.


On another note, I had my car out this weekend and had a great time. Over the last month, I got all the shit wired that I added on my own. finish the bumpers front and rear even made a little bit better front skid plate after clobbering and a giant rock this weekend. Got my storage rack more or less done in the back. I just have to build the box I’m going to attach to it. Trying to make Barstow California 300 in two weeks for some more break in and shock adjustments as I had down south do the springs. View attachment 1429395 View attachment 1429396 View attachment 1429397 View attachment 1429398 View attachment 1429399 View attachment 1429400
Click to expand...


That’s coming together nice. As said above, stellar jack mount.

Great looking car!
 
A

Albacore

Well-Known Member
Joined
Dec 9, 2022
Messages
224
Reaction score
426
DLC said:
I’m digging your jack mount ! I was thinking about doing the same thing !

Sweet set up !
Click to expand...
I could send you the DXF file I designed in cad for the 3/16 aluminum plate that mounts to the bed. If you like you could have it cut out of aluminum or steel wherever you like and then have a fabricator do the other parts. Let me know.

The only thing I would say is the holes for where it mounts to the bed have to be enlarged and drilled out and then use the large aluminum washers. When I designed it, I tried to measure it as close as I could to the actual bed of the vehicle, but was off a little on some of the holes. With the big washers there is no issue. I am making a storage box that will mount to the side with the jack. It’s about 6 inches wide by about 40 inches long and 10 inches tall. It will be able to hold a two spare axles basically a front and rear some oil and other trail repair items for when I’m doing longer trips.

The whole thing comes out rather easy as I probably won’t have it in there when I am at the Sandunes.
 
D

DLC

Well-Known Member
Joined
Jan 18, 2013
Messages
10,891
Reaction score
16,311
Albacore said:
I could send you the DXF file I designed in cad for the 3/16 aluminum plate that mounts to the bed. If you like you could have it cut out of aluminum or steel wherever you like and then have a fabricator do the other parts. Let me know.

The only thing I would say is the holes for where it mounts to the bed have to be enlarged and drilled out and then use the large aluminum washers. When I designed it, I tried to measure it as close as I could to the actual bed of the vehicle, but was off a little on some of the holes. With the big washers there is no issue. I am making a storage box that will mount to the side with the jack. It’s about 6 inches wide by about 40 inches long and 10 inches tall. It will be able to hold a two spare axles basically a front and rear some oil and other trail repair items for when I’m doing longer trips.

The whole thing comes out rather easy as I probably won’t have it in there when I am at the Sandunes.
Click to expand...


Thank you for the offer!

I’m going to swing by AGM and buy the mount for some mock up. We are both in Escondido and one of the counter guys is my neighbor ….
 
Bpracing1127

Bpracing1127

Well-Known Member
Joined
May 31, 2012
Messages
10,556
Reaction score
13,681
DLC said:
Thank you for the offer!

I’m going to swing by AGM and buy the mount for some mock up. We are both in Escondido and one of the counter guys is my neighbor ….
Click to expand...
Where is my 50% off on their jack?
 
  • Like
Reactions: DLC
You must log in or register to reply here.
Top