j.mckune
Member
- Joined
- Sep 2, 2020
- Messages
- 13
- Reaction score
- 30
Selling a 2001 complete takeout 496 mag ho. Motor has 330 hours on it. Purchased the boat and motor had oil blow by on the first trip out. Motor runs and idles but under a load has blow by due to cylinder 1 running lean and cracking the piston above the ringland. Motor has good oil pressure and ran at 160 water temp. Pulled the motor out complete and replaced with different power. Was going to tear the motor down to rebuild and have injectors tested but don’t really have the time to do it. Someone make me a good offer on it, it’s located in chino ca on my flatbed trailer. Attached is a pic from a bore scope of the bad cylinder