russian roullete boat

[NASTYTOYSRACING01]

does any body now this guys #id like to ask him how he likes that cole and the handling caracteristics of it

 

[RiverDave]

He is on here and on PB.. The cole is a good boat for sure.. J540 also has a blown injected cole open bow that runs real hard..

No offense to the guys on PB, but a connelly isn't going to run near as good as the other boats your looking at. Don't get me wrong they are cool and have a certain mystique to them, but they will flat beat the holy shit out of you in any kind of water more then a ripple. No I've never been in one, but a flat bottom is a flat bottom and there isn't nothing that's gonna change that.

I'd consider a 20' Schiada if I was you.. Kind of the best of both worlds between the Rayson & a 21 Schiada.. Still likes decent water, but it's a small hotrod. I'd also look at a "Rush" hull just because they look the best IMO.

The cole is going to be a bitch to find one like Rushin Roulette.. their pretty rare nowdayz.

RD

 

[RiverDave]

Pics of FlatMvn's Rush

 

[RiverDave]

Just reread the therad on PB, apparently some other people suggested Rush this morning too.. LOL

RD

 

[NASTYTOYSRACING01]

yes ive heard about thoughs it looks like a 20 rayson top,have you seen thoughs around parker dave and r they fast and do they have a # that i can call them thanks,i found the cole ss IIther up the coast giroux boats is making them now,i just like something different than every body else,theres just to many schiadas around,dont get me rong there one of the best but every body has them,im looking for more of a screamer than comfort

 

[djunkie]

Just reread the therad on PB, apparently some other people suggested Rush this morning too.. LOL

RD

:thumbsup
________
Enzo ferrari

 

[obnoxious001]

have you seen thoughs around parker dave and r they fast

I think it was pretty darn fast with that engine, once Louis gets back from the races this weekend maybe he will finally fire up the new blown injected 540 that I built for him. I don't think Louis would have a problem talking to you about the boat, and he knows about some of the other ones and their history.

 

[Deception88]

Dave,

When our Connolly gets done, I want to take you for a ride in it!!! Planning on a trip to the river/havasu around september!!! you up for it?

 

[=River Perfection=]

does any body now this guys #id like to ask him how he likes that cole and the handling caracteristics of it

Yes, he is my neighbor at the River. Hes a new owner of it and droped the blower motor in it... dont know how much time he has behind the wheel of that boat yet. I can get you the last owners number. It has been around.



Rush's are a great hull...they ride rough as well...and the ones I have seen are pretty heavy to take the beatings. I just sold a Rayson 21 that would of been perfect for you... brand new balsa floor and fresh bottom. I let it go for 10k and had almost 8k in glass work. The things turn on rails..it's almost sick!!


Here u can see the entry and rear on my Connolly. Its a lighter weight lay up... it cuts the chop ok...but will take a set and be gone before a lot of these other boats. For rough water... no cruisers mentioned are gonna cut through it like a Schiada.

 

[Full Pull]

I'd consider a 20' Schiada if I was you.. Kind of the best of both worlds between the Rayson & a 21 Schiada.. Still likes decent water, but it's a small hotrod. I'd also look at a "Rush" hull just because they look the best IMO.

RD

How do the 19' Schiada/Howards compare? You see a few of them for sale from time to time, and I know there are a few hard running ones out there.

 

[NASTYTOYSRACING01]

gn 69 and flat moving mph and motor combo on the rushes any body now

 

[NASTYTOYSRACING01]

I think it was pretty darn fast with that engine, once Louis gets back from the races this weekend maybe he will finally fire up the new blown injected 540 that I built for him. I don't think Louis would have a problem talking to you about the boat, and he knows about some of the other ones and their history.

hey barry can you get ahold of him to see if i can get info on the boats and how he likes them

 

[RiverDave]

Dave,

When our Connolly gets done, I want to take you for a ride in it!!! Planning on a trip to the river/havasu around september!!! you up for it?

Deception88, I'm down to film it from the shore.. LOL I don't make it a habbit to get into peoples "new" 1300 HP boats. That's a fast way to get killed.

How do the 19' Schiada/Howards compare? You see a few of them for sale from time to time, and I know there are a few hard running ones out there.

Compare to what? a 21 Schiada, 20 Schiada? etc?

To be bluntly honest, I have no idea.. I've never been in one. You guys gotta keep in mind when I'm saying "rough water" I actually use my boats, and their not trailer queens. I'll go out and run em saturday afternoon on a memorial day in Parker in Parker.

If your normal deal is running in quieter places, or in the mornings etc.. Then all these boats are kick ass boats.

Back to the 19' Howard/schiada. Never been in one. There is a guy on here that has a 100+mph 19' Schiada. Afternoon on memorial day weekend he was trying to catch up and pass me. I was running abuot 65mph and he never caught up or passed me. All that being said though, the water conditions we're most definately in my favor (big water). LOL

RD

 

[=River Perfection=]

Thats it....I'm building a turboed Nordic Cyclone all carbon/kevlar and composite.... putting in a huge delta pad with a v-drive. Mike Ramirez and Mike King will be the brains I'm gonna be the machinest. It will have 4 seprate plates with the two outside plates @18" length. The Schiadas are going down!

 

[NASTYTOYSRACING01]

thats what im talking about

 

[RiverDave]

Thats it....I'm building a turboed Nordic Cyclone all carbon/kevlar and composite.... putting in a huge delta pad with a v-drive. Mike Ramirez and Mike King will be the brains I'm gonna be the machinest. It will have 4 seprate plates with the two outside plates @18" length. The Schiadas are going down!

Not sure you'd want a v-drive with that sharp of a nose on it.. As soon as you hit the plates and end up on the beach you'll be thinking to yourself.. "Man i wish I had a Schiada"

RD

 

[Full Pull]

Compare to what? a 21 Schiada, 20 Schiada? etc?
RD

I was curious how they compared to some of the other smaller GN type boats. They've got a deeper V than the Rayson 20 and the Rush and a lot smaller (and fewer) strakes. As a result, they appear to run much more 'on the keel.' The GN class is predominantly Rayson Crafts, so they aren't too competitive on the racing front, but were raced in the past (not sure how successfully).

 

[Deception88]

Deception88, I'm down to film it from the shore.. LOL I don't make it a habbit to get into peoples "new" 1300 HP boats. That's a fast way to get killed.

RD

Thats fine Dave, But you do Know that I Have been around the boat business a long time, After all my name is Connolly!!! My brother was the "No Fear" type of person, Thats why he got the world record and that is why he crashed!!

 

[RiverDave]

Well in that case.. I'm driving!

rd

 

[BIGAMIST]

Dave, you should've takin a ride in this Howard last time we were up there.:thumbsup

.

 

[RUSHIN ROULETTE]

does any body now this guys #id like to ask him how he likes that cole and the handling caracteristics of it

Hey Nasty turn your PM's on..tried sending you a message.

 

[500bbc]

I was curious how they compared to some of the other smaller GN type boats. They've got a deeper V than the Rayson 20 and the Rush and a lot smaller (and fewer) strakes. As a result, they appear to run much more 'on the keel.' The GN class is predominantly Rayson Crafts, so they aren't too competitive on the racing front, but were raced in the past (not sure how successfully).

HEY! Where'd you get that pic?

The red boat is running at about 1/10th throttle, note child in passenger seat.

 

[RiverDave]

Hey Nasty turn your PM's on..tried sending you a message.

Try it again and let me know if it works this time.

RD

 

[RUSHIN ROULETTE]

Try it again and let me know if it works this time.

RD

Still will not work.

 

[NASTYTOYSRACING01]

well any ways how do you like your cole and how does it handle at 100mph,dave pmed me and it worked wonder why it dont with you

 

[RUSHIN ROULETTE]

well any ways how do you like your cole and how does it handle at 100mph,dave pmed me and it worked wonder why it dont with you

It handles really well and can take the chop too, thanks to some work on the bottom and added stringers to the sides. Speed is no problem, takes a set nice back on the delta pad. It runs well, with just around 800hp it still goes 102mph on gps full of fuel. The new owner is playing around with a couple of differnt engines, but I suspect the turbo motor will find its way back into the boat.

 

[NASTYTOYSRACING01]

THANKS RR I TALKED TO J540 HE LOVES HIS TO

 

[=River Perfection=]

You really want to do the damn thing...this is the set up you would want!!

 

[SPECTRABRENT]

You really want to do the damn thing...this is the set up you would want!!

Wilderthanu

Is that your old Rayson?

Nice Boat!

Brent

 

[=River Perfection=]

Not at all..... that is a boat built by Mike King years ago. Was owned by my neighbos the Goldsmiths now it switched hands in the park. Fucking thing runs!!!

 

[Mondorally]

Not at all..... that is a boat built by Mike King years ago. Was owned by my neighbos the Goldsmiths now it switched hands in the park. Fucking thing runs!!!

Is the owner named Danny?

 

[RUSHIN ROULETTE]

For what its worth..IMHO

If you want a 20' boat low profile, a Rayson craft will be hard to beat. I especially like the look on peoples faces when you blow by them in rough water and they thought you were in a flat bottom and couldnt keep up!

As far as 21' cruisers go...Schiada, Hallet or Rayson's. Any of these are awsome boats. Conolly's are cool but they are flat on the bottom. I love v-drives, but I just drove a Twin Turbo Vector with a #3 drive and now I know why there are so many used in ski racing.

I liked my Cole because it was different and not everybody had one.

 

[River Lynchmob]

You really want to do the damn thing...this is the set up you would want!!

I believe that Denny Lee built this boat originally then a schiada then the brummett. used to be called keyboard express...if i'm not mistaken

 

[obnoxious001]

I believe that Denny Lee built this boat originally then a schiada then the brummett. used to be called keyboard express...if i'm not mistaken

You are correct. The Goldsmiths changed the name, as well as replacing a light blue stripe with red. I drove that boat in a race or two pulling Carl.

 

[Deception88]

For what its worth..IMHO

If you want a 20' boat low profile, a Rayson craft will be hard to beat. I especially like the look on peoples faces when you blow by them in rough water and they thought you were in a flat bottom and couldnt keep up!

As far as 21' cruisers go...Schiada, Hallet or Rayson's. Any of these are awsome boats. Connolly's are cool but they are flat on the bottom. I love v-drives, but I just drove a Twin Turbo Vector with a #3 drive and now I know why there are so many used in ski racing.

I liked my Cole because it was different and not everybody had one.

Flat is fast man!!!

Ours takes the chop pretty well, considering that it is flat in the rear... Wind chop is fine but Nasty boat chop like 3 foot rollers, you can take a beating!!

When the water is nice and glassy though it Runs hard!!!