WELCOME TO RIVER DAVES PLACE

[WTS] Quick Fuel 750 Dp, BBC and SBC Logs, Snails, Flame arrestor

Colton

Well-Known Member
Joined
Jul 6, 2023
Messages
51
Reaction score
36
Quick Fuel 750 double pumper. 4150 flange
Never had any problems with this carb, It has fully tuneable metering blocks, 5.5 powervalve, 35 squirters, .120 needle and seats. Red accelerator pump cams, I don't recall air bleed sizes or jet sizes off the top of my head, but could pull bowls and let you know. 4 corner idle circuits. Non stick bowl gaskets Had this carb dialed in good on a .060 over 350 chevy.
$650.00⁸

Glenwood Big Block Chevy logs and snail risers. 3.5" outlets with new gaskets. Studs are in good shape, no cracks.
Overall rough condition and would need a good deal of polishing to look good.
$400.00

Unknown Brand SBC Logs and Snails ( pulled from a Baja jet with Indmar Pakajet rigging. I ran these all last summer with no Leaks or issues. I installed new studs and gaskets. They have had a bunch of welding done on them in the past. See pics.
$350.00


Holley 750-850 Cfm flame arrestor, 8 inch. Decent shape. 1 summer of use.
$120.00
 

Attachments

  • 20250202_124336.jpg
    20250202_124336.jpg
    2 MB · Views: 0
  • 20250202_124242.jpg
    20250202_124242.jpg
    4.8 MB · Views: 0
  • 20250202_123936.jpg
    20250202_123936.jpg
    2.6 MB · Views: 0
  • 20250202_115328.jpg
    20250202_115328.jpg
    2.4 MB · Views: 0
  • 20250202_115318.jpg
    20250202_115318.jpg
    1.7 MB · Views: 0
  • 20250202_115125.jpg
    20250202_115125.jpg
    1.8 MB · Views: 0
  • 20250202_114901.jpg
    20250202_114901.jpg
    2 MB · Views: 0
  • 20250202_114846.jpg
    20250202_114846.jpg
    1.6 MB · Views: 0
  • 20250202_114619.jpg
    20250202_114619.jpg
    2.5 MB · Views: 0
  • 20250202_114608.jpg
    20250202_114608.jpg
    1.9 MB · Views: 0
  • 20250202_114559.jpg
    20250202_114559.jpg
    4.3 MB · Views: 0
  • 20250202_114551.jpg
    20250202_114551.jpg
    2.5 MB · Views: 0
  • 20250202_114546.jpg
    20250202_114546.jpg
    2.2 MB · Views: 0
  • 20250202_114417.jpg
    20250202_114417.jpg
    2.5 MB · Views: 0
  • 20250202_114334.jpg
    20250202_114334.jpg
    2.6 MB · Views: 0
  • 20250202_114317.jpg
    20250202_114317.jpg
    1.6 MB · Views: 0
  • 20250202_114131.jpg
    20250202_114131.jpg
    2.4 MB · Views: 0
  • 20250202_114150.jpg
    20250202_114150.jpg
    2.5 MB · Views: 0
  • 20250202_114159.jpg
    20250202_114159.jpg
    2.6 MB · Views: 0
  • 20250202_114225.jpg
    20250202_114225.jpg
    2.4 MB · Views: 0

Colton

Well-Known Member
Joined
Jul 6, 2023
Messages
51
Reaction score
36
I have one set of the aluminum risers that come on the EMI Thunder manifolds. Decent shape, I don't see anything wrong with them.
$400.00
 

Colton

Well-Known Member
Joined
Jul 6, 2023
Messages
51
Reaction score
36
350.00 shipped on these
1000011116.jpg
 

Attachments

  • 20250206_173256.jpg
    20250206_173256.jpg
    2 MB · Views: 0
  • 20250206_173317.jpg
    20250206_173317.jpg
    2.2 MB · Views: 0
  • 20250206_173334.jpg
    20250206_173334.jpg
    3.4 MB · Views: 0
Top