Help finding clevis

[n2otoofast4u]

I looked pretty hard I feel. Working on new jet bote project.

3/8 or 1/2 NF or NC male or female on top

5/16 or 1/4” pin diameter

1/2” slot

Would prefer stainless, but would be ok with steel.

 

[monkeyswrench]

Look up a 28-48 Ford clutch pedal clevis. I believe they are 3/8nf...but never seen a stainless one.

 

[JUSTWANNARACE]

I looked pretty hard I feel. Working on new jet bote project.

3/8 or 1/2 NF or NC male or female on top

5/16 or 1/4” pin diameter

1/2” slot

Would prefer stainless, but would be ok with steel.

View attachment 1440572

"No homo"

I'm just glad you added the "burd"

Did DDQ draw this picture for you


McGuire bearing?

 

[evantwheeler]

I looked pretty hard I feel. Working on new jet bote project.

3/8 or 1/2 NF or NC male or female on top

5/16 or 1/4” pin diameter

1/2” slot

Would prefer stainless, but would be ok with steel.

View attachment 1440572

Midwest control likely has what you need. This is closeish.

Clevis and Yoke Ends Female 3/8-24 RH

YK06F06ZC, Clevis and Yoke Ends, Female 3/8-24 RH 0.375 Pin Holes Plated Zinc Clear Hex Free Forged Construction

midwestcontrol.com

Also closeish:

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[Orange Juice]

I looked pretty hard I feel. Working on new jet bote project.

3/8 or 1/2 NF or NC male or female on top

5/16 or 1/4” pin diameter

1/2” slot

Would prefer stainless, but would be ok with steel.

View attachment 1440572

Search Results | Aircraft Spruce

Aircraft Spruce is a worldwide distributor of certified and homebuilt aircraft supplies.

www.aircraftspruce.com

 

[Eliminator21vdrive]

Clevises and Yoke Ends - Lexco Cable

https://www.lexcocable.com/media/rebj1wz5/clevises-yoke-ends.jpg

www.lexcocable.com

 

[ltbaney1]

Search Results | Aircraft Spruce

Aircraft Spruce is a worldwide distributor of certified and homebuilt aircraft supplies.

www.aircraftspruce.com

View attachment 1440589

i love aircraft spruce. insider tip, eat at the cafe at the corona airport, pretty dang good, reasonably priced and cool people. aircraft spruce will send a driver there in a van to pick you up and take back when done shopping. they have a small sign hung up inside the cafe with the phone number to call.

 

[Terminal Velocity]

ROD END SUPPLY - Rod End Supply

Shop Online SHOP ONLINE Rod Ends Weld-In Bungs Radius Rods Misalignment Spacers Fasteners Clevis & Ball Joints Spherical Bearings Sprint Cars

rodendsupply.com

They have a 5/16x3/8 Clevis

Clevis - Rod End Supply

CLEVIS Call Rod End Supply inside sales personnel at 1-800-284-2902 with your specific application needs. STANDARD MATERIAL C1045 STEEL ZINC PLATED

rodendsupply.com

 

[n2otoofast4u]

Clevises and Yoke Ends - Lexco Cable

https://www.lexcocable.com/media/rebj1wz5/clevises-yoke-ends.jpg

www.lexcocable.com

Holy cow! This is like the mother load of clevis's!!! Found what I needed, or close enough to modify.... Thank you!

 

[nuckingfuts]

Holy cow! This is like the mother load of clevis's!!! Found what I needed, or close enough to modify.... Thank you!

I understand you already found something, but you might try any place that builds sail boat rigging if you really want stainless.

 

[500bbc]

Did you try

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

First?

 

[Icky]

Did you try

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

First?

That was my first thought, so I looked, pin size was 3/8" for a 3/8-24

 

[BUDMAN]

Try FLeetPride.com

 

[n2otoofast4u]

Did you try

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

First?

Of course! But really trying to stick with 5/16 pin and they only had 3/8. Seems the real tricky part was .5” spread.

 

[Heylam]

Clevis has left the building, lol

 

[Orange Juice]

Clevis